Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

The Trenz Electronic TE0724 is an industrial-grade SoC module based on Xilinx Zynq 7010/7020, which provides a dual core ARM Cortex A9 and a 7a 7-series FPGA logic. It provides a gigabit ethernet transceiver, 1GByte 1 GByte of DDR3L SDRAM, 64 MByte Flash memory as configration and data storage. It includes strong powerregulators power regulators for all needed voltages and a robust high-speed connector for in- and outputs. It has a 6 x 4 cm form factor.

...

DCDC U8 component is either TPS82140 (2 A) or MUN12A (3 A) depending on the variant.

Scroll Title
anchorPD_TE0724
titleFigure 3: TE0724 power distribution diagram.


Scroll Ignore

draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramNamePD_TE0724
simpleViewertrue
width
linksauto
tbstyletop
lboxtrue
diagramWidth641
revision910


Scroll Only


See Xilinx data sheet for additional information. User should also check related base board documentation when intending base board design for TE0724 module.

Power-On Sequence

The TE07024 TE0724 SoM meets the recommended criteria to power up the Xilinx Zynq MPSoC properly by keeping a specific sequence of enabling the on-board DC-DC converters dedicated to the particular functional units of the Zynq chip and powering up the on-board voltages. For a detailed description of the configurabel configurable Power Management IC please refer to the datasheet of  of dialog semicondutor DA9062.

...

Power Rail Name

B2B JM1 Pins

Direction

Notes
VIN154, 156, 158,160InputMain supply voltage from the carrier board.
VCCIO_3554InputPL Bank 35 supply voltage.
VLDO183Output3.3V (100mA)
VLDO294Output1.8V (300mA)
VLDO3453Output2.5V (600mA)
3.3V43, 74OutputAdditional module on-board 3.3V voltage supply (2A2 A or 3 A variant dependent).
1.0V-
Buck1 & Buck2 of U4.
1.8V63OutputBuck3 of U4.
VDD_DDR-
DDR supply voltage powered by Buck4 of U4.

VBAT

152Output/InputBattery charger (out) and supply for RTC and 32kHz crystal (in).

...

Recommended Operating Conditions

ParameterMinMaxUnitsReference Document
VIN supply voltage (variant "-Z" with MUN12A for U8)4.55.5V
VIN supply voltage (all other variants)3.65.5V
Operating temperature-4085°C

Table 19: Module recommended operating conditions.

...

DateRevision

Notes

2020-11-0504Changed DDR3, Flash, see PCN
2019-03-1203changed 3.3V DCDC

02AElectrical same as REV 02.

02First production release
-

01

Prototypes

...

Date

Revision

Contributors

Description

Page info
infoTypeModified date
dateFormatyyyy-MM-dd
typeFlat

Page info
infoTypeCurrent version
dateFormatyyyy-MM-dd
prefixv.
typeFlat

Page info
infoTypeModified by
dateFormatyyyy-MM-dd
typeFlat

  • update for "-Z" variant (MUN12A)
2020-11-17


v.58


Martin Rohrmüller


  • update to REV04 (DDR, Flash)
2019-10-31v.56Martin Rohrmüller
  • VBAT is In/OUT (charger)
2019-10-30v.55John Hartfield
  • correction on power section

2019-06-27

v.54Martin Rohrmüller
  • Updated Power Distribution dependencies Figure (VBAT: Charge and Use)

2019-06-11

v.53 Guillermo Herrera
  • typo correction on Bank voltage section

2019-03-29

v.51Martin Rohrmüller
  • update to REV03

2018-11-20

v.44John Hartfiel
  • remove typo

2018-10-10

v.43John Hartfiel
  • Add notes to EEPROM section

2018-10-09

v.42Martin Rohrmüller
  • corrected mating high at physical dimensions

2018-10-01

v.41Martin Rohrmüller
  • corrected typo in power up order
  • updated B2B power rating

2018-09-21

v.39Martin Rohrmüller
  • B2B Connectors as include from general page

2018-07-20

v.37John Hartfield
  • small style changes

2018-07-06

v.34

Martin Rohrmüller

  • Initial document.
---

all

Page info
infoTypeModified users
dateFormatyyyy-MM-dd
typeFlat

  • ---

...