Page History
...
todo
EDDP System Components
Hardware - TODO
EDDP Kit Content
- Control Board: ARTY-Z-7010
- EDPS Driver Board: TEC0053
- EDPS Motor Adapter Board: TEC0060
- EDPS Reference Motor with Encoder: BLRW-111D-24V-10000-1000-SI
- Plastic DEMO load for Motor
- One 6 Pin PMoD cable
- Two 12V Power Supplies
- Screws and other accessories used to mount the motor
- One spare M6 Screw
- Plastic cover for Driver Board use without TEC0060
- 30A Fuse for Driver Board use without TEC0060
- Micro SD Card
- Quickstart Guide
...
<< todo INSERT FOTO with full kit all parts visible, also power supply etc..>>
Control Board
The default Control Board is the Digilent ARTY-Z 7010, which is delivered as part of the EDDP Kit. This manual contains information relevent to the actual use of the ARTY-Z as a Control Board within the EDDP only; all technical data and user guides and manuals for the Controller Board are provided by the controller board manufacturer.
Software
The software consists of the following parts:
...
Title | Description |
---|---|
FOC SDSoC | Implementation of a Field-Oriented Control algorithm in C++ with Vivado SDSoC |
SDSoC Hardware Platform ARTY-Z7 | A basis for building Vivado SDSoC applications running on an Arty-Z7 board connected to a TEC0053 board |
AXI4-Stream AD7403 | An IP core for filtering the delta-sigma bitstream read from one or more ADC-s of type of AD7403 to an AXI4-Stream of samples |
AXI4-Stream Encoder | An IP core for converting impulses from a relative index encoder with an index signal to an AXI4-Stream of position and speed data |
AXI4-Stream PWM | An IP core for generating PWM signals according to the input AXI4-Stream |
AXI4-Stream Concat | An IP core for concatenating AXI4-Streams |
Web GUI | A Web UI to control and monitor an EDPS board over the Network API |
Network API | A communication protocol, based on Websockets, to control an EDPS board |
Embedded Linux Code | A server program interfacing to an EDPS board and implementing the Network API and the functions of a Web Server |
Control Board
The default Control Board is the Digilent ARTY-Z 7010, which is delivered as part of the EDDP Kit. This manual contains information relevent to the actual use of the ARTY-Z as a Control Board within the EDDP only; all technical data and user guides and manuals for the Controller Board are provided by the controller board manufacturer.
Include Page | ||||
---|---|---|---|---|
|