Page History
...
When using XMOD FTDI JTAG Adapter TE0790, the adapter-board's VCC and VCCIO will be sourced by the Carrier Board. Set the DIP-switch with the setting:
| XMOD DIP-switches | Position |
|---|---|
| Switch 1 | ON |
| Switch 2 | OFF |
| Switch 3 | OFF |
| Switch 4 | ON |
Table 13: XMOD module DIP-switch positions for voltage configuration.
...
If TE0729 is mounted, following bootmodes can be configured by setting the DIP-switches S2-2 and S2-3:
| Boot Mode | S2-2 | S2-3 |
|---|---|---|
| JTAG | ON | ON |
| SD | OFF | OFF |
| QSPI | ON | OFF |
Table 15: Bootmode configuration via DIP-switch S2.
...
The TEB0729 Carrier Board itself is capable to be operated at industrial grade temperature range.
Please check the operating temperature range of the mounted SoM, which determine the relevant operating temperature range of the overall system.
Physical Dimensions
Board size: 107.70 mm × 100 mm. Please download the assembly diagram for exact numbers.
Mating height with standard connectors: 8 mm.
PCB thickness: ca. 1.65mm.
Highest part on the PCB is the Ethernet RJ-45 jack, which has an approximately 17 mm overall height. Please download the step model for exact numbers.
...
Overview
Content Tools