Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Page properties
hiddentrue
idComments

Design Name is always "TE Series Name" + Design name, for example "TE0720 Test Board"


DateVersionChangesAuthor
2023-12-143.1.17
  • updated according to Vivado 2023.2
ma
2023-06-133.1.16
  • Design flow:
    • added alternative programming files in Petalinux
  • added chapter FSBL Patch in Software Design - Petalinux
ma
2023-06-013.1.15
  • removed u-boot.dtb from Design flow
ma
2023-06-013.1.14
  • expandable lists for revision history and supported hardware
wh
2023-05-253.1.13
  • updated according to Vivado 2022.2
ma
2023-02-083.1.12
  • removed content of
    • Special FSBL for QSPI programming
ma
2022-08-243.1.11
  • Modification from link "available short link"
ma
2022-01-253.1.10
  • removed u-boot.dtb from QSPI-Boot mode and SD-Boot mode. Is implemented in BOOT.bin
  • corrected Boot Source File in Boot Script-File
ma
2022-01-143.1.9
  • extended notes for microblaze boot process with linux
  • add u.boot.dtb to petalinux notes
  • add dtb to prebuilt content
  • replace 20.2 with 21.2
jh
2021-06-283.1.8
  • added boot process for Microblaze
  • minor typos, formatting
ma
2021-06-013.1.7
  • carrier reference note
jh
2021-05-043.1.6
  • removed zynq_ from zynq_fsbl
ma
2021-04-283.1.5
  • added macro "Scroll ignore" for suppression of horizontal dividing lines during .pdf-export
  • minor typos, formatting
ma
2021-04-273.1.4
  • Version History
    • changed from list to table
  • Design flow
    • removed step 5 from Design flow
    • changed link from TE Board Part Files to Vivado Board Part Flow
    • changed cmd shell from picture to codeblock
    • added hidden template for "Copy PetaLinux build image files", depending from hardware
    • added hidden template for "Power on PCB", depending from hardware
  • Usage update of boot process
  • Requirements - Hardware
    • added "*used as reference" for hardware requirements
  • all
    • placed a horizontal separation line under each chapter heading
    • changed title-alignment for tables from left to center
  • all tables
    • added "<project folder>\board_files" in Vivado design sources
ma

3.1.3
  • Design Flow
    • formatting
  • Launch
    • formatting
ma

3.1.2
  • minor typing corrections
  • replaced SDK by Vitis
  • changed from / to \ for windows paths
  • replaced <design name> by <project folder>
  • added "" for path names
  • added boot.src description
  • added USB for programming
ma

3.1.1
  • swapped order from prebuilt files
  • minor typing corrections
  • removed Win OS path length from Design flow, added as caution in Design flow
ma

3.1
  • Fix problem with pdf export and side scroll bar
  • update 19.2 to 20.2
  • add prebuilt content option


3.0
  • add fix table of content
  • add table size as macro
  • removed page initial creator


Custom_table_size_100
Page properties
hiddentrue
idComments

Important General Note:

  • Export PDF to download, if vivado revision is changed!

  • Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro

    • Use "Scroll Title" macro for pictures and table labels. Figure number must be set manually at the moment (automatically enumeration is planned by scrollPDF)
      • Figure template (note: inner scroll ignore/only only with drawIO object):

        Scroll Title
        anchorFigure_xyz
        titleText


        Scroll Ignore

        Create DrawIO object here: Attention if you copy from other page, use


        Scroll Only

        image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed



      • Table template:

        • Layout macro can be use for landscape of large tables
        • Set column width manually (can be used for small tables to fit over whole page) or leave empty (automatically)

      • Scroll Title
        anchorTable_xyz
        titleText

        Scroll Table Layout
        orientationportrait
        sortDirectionASC
        repeatTableHeadersdefault
        style
        widths
        sortByColumn1
        sortEnabledfalse
        cellHighlightingtrue

        ExampleComment
        12



  • ...

Overview

Scroll Ignore
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue


Page properties
hiddentrue
idComments

Notes :

Design Example with minimum PS Setup (DDR, QSPI, UART0) only for custom boards or easier debug via Vitis.

Refer to http://trenz.org/te0808-info for the current online version of this manual and other available documentation.

Key Features

Page properties
hiddentrue
idComments

Notes :

  • Add basic key futures, which can be tested with the design


Excerpt
  • Vitis/Vivado 20222023.2
  • QSPI
  • Custom Carrier (minimum PS Design with available module components only)
  • Modified FSBL (some additional outputs only)

Revision History

Page properties
hiddentrue
idComments

Notes :

  • add every update file on the download
  • add design changes on description
Expand
titleExpand List
Scroll Title
anchorTable_DRH
title-alignmentcenter
titleDesign Revision History

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DateVivadoProject BuiltAuthorsDescription
20232024-0603-011320222023.2TE0808-test_board-vivado_20222023.2-build_14_2023060110143220240313130413.zip
TE0808-test_board_noprebuilt-vivado_20222023.2-build_14_2023060110143220240313130413.zip
Manuela Strücker
  • 20222023.2 release
  • new assembly variants
2023-0406-130120212022.2.1TE0808-test_board-vivado_20212022.2-build_201_2023041309024520230601101432.zip
TE0808-test_board_noprebuilt-vivado_20212022.2-build_1_20230601101432.zip
Manuela Strücker
  • 2022.2 release
  • new assembly variants
2023-04-132021.2.1TE0808-test_board-vivado_2021.2-build_20_20230413090245.zip
TE0808-test_board_noprebuilt-vivado_2021.2-build_20_20_20230413090245.zip
Manuela Strücker
  • new assembly variants
2022-09-292021.2.1TE0808-test_board-vivado_2021.2-build_17_20220928203325.zip
TE0808-test_board_noprebuilt-vivado_2021.2-build_17_20220928203325.zip
Manuela Strücker
  • script update
  • new assembly variants
2022-09-122021.2.1TE0808-test_board-vivado_2021.2-build_15_20220912090608.zip
TE0808-test_board_noprebuilt-vivado_2021.2-build_15_20220912090608.zip
Manuela Strücker
  • update board part files compatible to Vivado 2021.2.1
2022-03-212021.2TE0808-test_board-vivado_2021.2-build_11_20220321063547.zip
TE0808-test_board_noprebuilt-vivado_2021.2-build_11_20220321063547.zip
John Hartfiel
  • replace Starterkit FSBL with default one
2022-03-162021.2TE0808-test_board-vivado_2021.2-build_11_20220316091917.zip
TE0808-test_board_noprebuilt-vivado_2021.2-build_11_20220316091917.zip
Manuela Strücker
  • 2021.2 release
  • update board files
2021-05-122020.2TE0808-test_board-vivado_2020.2-build_5_20210512133121.zip
TE0808-test_board_noprebuilt-vivado_2020.2-build_5_20210512133137.zip
John Hartfiel
  • update board files
2021-02-052020.2TE0808-test_board-vivado_2020.2-build_0_20210204141911.zip
TE0808-test_board_noprebuilt-vivado_2020.2-build_1_20210204142855.zip
John Hartfiel
  • 2020.2 update
2020-09-292019.2TE0808-test_board_noprebuilt-vivado_2019.2-build_15_20200929070740.zip
TE0808-test_board-vivado_2019.2-build_15_20200929070725
John Hartfiel
  • bugfix 8GB board parts
2020-09-222019.2TE0808-test_board_noprebuilt-vivado_2019.2-build_14_20200922073159.zip
TE0808-test_board-vivado_2019.2-build_14_20200922073144.zip
John Hartfiel
  • new assembly variants
2020-03-252019.2TE0808-test_board_noprebuilt-vivado_2019.2-build_8_20200325083246.zip
TE0808-test_board-vivado_2019.2-build_8_20200325083204.zip
John Hartfiel
  • script update
2020-01-222019.2TE0808-test_board_noprebuilt-vivado_2019.2-build_3_20200122142231.zip
TE0808-test_board-vivado_2019.2-build_3_20200122142208.zip
John Hartfiel
  • 2019.2 update
  • Vitis support
2019-08-092018.3TE0808-test_board_noprebuilt-vivado_2018.3-build_07_20190809131546.zip
TE0808-test_board-vivado_2018.3-build_07_20190809131522.zip
John Hartfiel
  • new assembly variants
2019-05-062018.3TE0808-test_board_noprebuilt-vivado_2018.3-build_05_20190507124141.zip
TE0808-test_board-vivado_2018.3-build_05_20190507124130.zip
John Hartfiel
  • custom FSBL
2018-07-112018.2TE0808-test_board_noprebuilt-vivado_2018.2-build_02_20180711143743.zip
TE0808-test_board-vivado_2018.2-build_02_20180711143702.zip
John Hartfiel
  • additional notes for FSBL generated with Win SDK
  • changed *.bif
2018-03-292017.4TE0808-test_board-vivado_2017.4-build_07_20180329151341.zip
TE0808-test_board_noprebuilt-vivado_2017.4-build_07_20180329151355.zip
John Hartfiel
  • new assembly variant
2018-01-162017.4TE0808-test_board-vivado_2017.4-build_04_20180116144644.zip
TE0808-test_board_noprebuilt-vivado_2017.4-build_04_20180116144657.zip
John Hartfiel
  • Update Board Part for TEBF0808
    • no changes for test board design and minimal board parts
2018-01-152017.4TE0808-test_board-vivado_2017.4-build_03_20180115084954.zip
TE0808-test_board_noprebuilt-vivado_2017.4-build_03_20180115085020.zip
John Hartfiel
  • rework Board Part Files
2017-12-202017.2

TE0808-test_board-vivado_2017.2-build_07_20171220192501.zip
TE0808-test_board_noprebuilt-vivado_2017.2-build_07_20171220192448.zip

John Hartfiel
  • Update Board Part Files
2017-11-222017.2TE0808-test_board-vivado_2017.2-build_05_20171122080211.zip
TE0808-test_board_noprebuilt-vivado_2017.2-build_05_20171122080228.zip
John Hartfiel
  • Update Board Part CSV File
  • Regenerate design
2017-11-162017.2

TE0808-test_board-vivado_2017.2-build_05_20171116151545.zip
TE0808-test_board_noprebuilt-vivado_2017.2-build_05_20171116151600.zip

John Hartfiel
  • Update Board Part CSV File with new Flash assembly variants
2017-11-132017.2TE0808-test_board-vivado_2017.2-build_05_20171113140954.zip
TE0808-test_board_noprebuilt-vivado_2017.2-build_05_20171113141908.zip
John Hartfiel
  • initial release



Release Notes and Know Issues

Page properties
hiddentrue
idComments
Notes :
  • add known Design issues and general notes for the current revision
  • do not delete known issue, add fixed version time stamp if issue fixed
Scroll Title
anchorTable_KI
title-alignmentcenter
titleKnown Issues

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

IssuesDescriptionWorkaroundTo be fixed version
Xilinx SoftwareIncompatibility of board files for ZynqMP with eMMC activated between 2021.2 and 2021.2.1 patch, see Xilinx Forum Requestuse corresponding board files for the Vivado versions--
QSPI FlashFlash programming is not supported with boot mode QSPI or SD.
If flash programming fails, configure device for JTAG boot mode and try again or use older Vivado Versions for programming. (Vivado 2020.2 or 2019.2)
--


Requirements

Software

Page properties
hiddentrue
idComments

Notes :

  • list of software which was used to generate the design
Scroll Title
anchorTable_SW
title-alignmentcenter
titleSoftware

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

SoftwareVersionNote
Vitis20222023.2needed, Vivado is included into Vitis installation



Hardware

Page properties
hiddentrue
idComments

Notes :

  • list of hardware which was used to generate the design
  • mark the module and carrier board, which was used tested with an *
Basic description of TE Board Part Files is available on TE Board Part Files.

Complete List is available on "<project folder>\board_files\*_board_files.csv"

Design supports following modules:

Expand
titleExpand List
Scroll Title
anchorTable_HWM
title-alignmentcenter
titleHardware Modules

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Module ModelBoard Part Short NamePCB Revision SupportDDRQSPI FlashEMMCOthersNotes
TE0808-ES1          es1_2gb      REV03|REV02 2GB      64MB       NA         NA               Not longer supported by vivado       
TE0808-ES2          es2_2gb      REV04|REV03 2GB      64MB       NA         NA               Not longer supported by vivado                    vivado          
TE0808-2ES2         2es2_2gb     REV04|REV03 2GB      64MB       NA         NA               Not longer supported by vivado             vivado        
TE0808-04-09EG06EG-1EA  1E39eg6eg_1e_2gb   4gbREV04       REV042GB      4GB64MB       128MBNA         NANA               1 mm connectorsNA                                     NA
TE0808-04-09EG06EG-1EB  1EE9eg6eg_1e_4gb   4gbREV04       REV044GB      4GB64MB       128MBNA         NANA               NANA                                     NA
TE0808-04-09EG-1ED  1EA9eg_1e_4gb   2gbREV04       REV044GB      2GB64MB       64MBNA         NA1 mm connectorsNANA                                     NA
TE0808-04-09EG-2IB  1EB9eg_2i1e_4gb   4gbREV04       REV044GB      4GB64MB       64MBNA         NANA               NANA                                     NA
TE0808-04-15EG09EG-1EB  1ED15eg9eg_1e_4gb  4gbREV04       REV044GB      4GB64MB       64MBNA         NANA               1 mm connectorsNA                                     NA
TE0808-04-09EG-1EE  1EE9eg_1e_4gb   4gbREV04       REV044GB      4GB128MB      128MBNA         NANA               NANA                                     NA
TE0808-04-09EG-1EL  1EL9eg_1e_4gb   4gbREV04       REV044GB      4GB128MB      128MBNA         NA1 mm connectorsNA                                     NA
TE0808-04-09EG-2IE* 2IB9eg_2i_4gb   4gbREV04       REV044GB      4GB128MB      64MBNA         NANA               NANA                                     NA
TE0808-04-15EG09EG-1EE  2IE15eg9eg_1e2i_4gb  4gbREV04       REV044GB      4GB128MB      128MBNA         NANA               NANA                                     NA
TE0808-04-06EG6BE21-1EE  A6eg_1e_4gb   4gbREV04       REV044GB      4GB128MB      128MBNA         NANA               NANA                                     NA
TE0808-04-06EG6BE21-1E3  L6eg_1e_4gb   4gbREV04       REV044GB      4GB128MB      128MBNA         NA1 mm connectorsNA                                     NA
TE0808-04-6GI216BI21-L   A6eg_2i1i_4gb   4gbREV04       REV044GB      4GB128MB      128MBNA         NA1 mm connectorsNANA                                     NA
TE0808-04-6BI21-A   X6eg_1i_4gb   4gbREV04       REV044GB      4GB128MB      128MBNA         NANA               NAU41 replaced with schottky diodesNA                                     
TE0808-04-9GI216GI21-A   L9eg6eg_2i_4gb   4gbREV04       REV044GB      4GB128MB      128MBNA         NANA               1 mm connectorsNA                                     NA
TE0808-04-9BE21-A   A9eg_1e_4gb   4gbREV04       REV044GB      4GB128MB      128MBNA         NANA               NANA                                     NA
TE0808-04-6BE219BE21-L   L6eg9eg_1e_4gb   4gbREV04       REV044GB      4GB128MB      128MBNA         NA1 mm connectorsNA                                     NA
TE0808-04-6BE219GI21-A   A6eg9eg_1e2i_4gb   4gbREV04       REV044GB      4GB128MB      128MBNA         NANA               NANA                                     NA
TE0808-04-9BE2115EG-L   1EB9eg15eg_1e_4gb   4gbREV04       REV044GB      4GB128MB      64MBNA         NA1 mm connectorsNANA                                     NA
TE0808-04-BBE2115EG-A   1EE15eg_1e_4gb  4gbREV04       REV044GB      4GB128MB      128MBNA         NANA               NANA                                     NA
TE0808-04-6BI21BBE21-X   A6eg15eg_1i1e_4gb   4gbREV04       REV044GB      4GB128MB      128MBNA         NANA               NANAU41 replaced with schottky diodes    
TE0808-05-6BE21-L   A6eg_1e_4gb   4gbREV05       REV054GB      4GB128MB      128MBNA         NA1 mm connectorsNANA                                     NA
TE0808-05-6BE21-A   F6eg_1e_4gb   4gbREV05       REV054GB      4GB128MB      128MBNA         NA               NANANA
TE0808-05-6BE21-AK6eg_1e_4gbREV054GB128MBNANANA
TE0808-05-6BE21-L6eg_1e_4gbREV054GB128MBNA1 mm connectorsNANA                                     
TE0808-05-6BI21-D   D6eg_1i_4gb   4gbREV05       REV054GB      4GB128MB      128MBNA         NA1 mm connectorsSoC without encryption               encryption
TE0808-05-6BI21-X   X6eg_1i_4gb   4gbREV05       REV054GB      4GB128MB      128MBNA         NANA               NAU41 replaced with schottky diodes    diodes
TE0808-05-6BI41-X   X6eg_1i_8gb   REV05       8GB      128MB      NA         NA               _8gbREV058GB128MBNANASingle Die DDR; U41 replaced with schottky diodes
TE0808-05-9BE21-A9eg_1e_4gbREV054GB128MBNANANA
TE0808-05-9BE21-AK9eg_1e_4gbREV054GB128MBNA1 mm connectorsNA
TE0808-05-9BE21-AZ9eg_1e_4gbREV054GB128MBNA1 mm connectorsNA
TE0808-05-9BE21-KZ9eg_1e_4gbREV054GB128MBNA1 mm connectorsNAU41 replaced with schottky diodes    
TE0808-05-9BE21-A   L9eg_1e_4gb   4gbREV05       REV054GB      4GB128MB      128MBNA         NANA               1 mm connectorsNA                                     NA
TE0808-05-9BE21-L   LK9eg_1e_4gb   4gbREV05       REV054GB      4GB128MB      128MBNA         NA1 mm connectorsNA                                     NA
TE0808-05-9BI419BE21-X   LZ9eg_1i1e_8gb   4gbREV05       REV058GB      4GB128MB      128MBNA         NANA               1 mm connectorsNAU41 replaced with schottky diodes    
TE0808-05-9GI219BE81-A   A9eg_2i1e_4gb   4gbREV05       REV054GB      4GB128MB      128MBNA         NANA               NANA                                     NA
TE0808-05-9GI219BI41-C   X9eg_2i1i_4gb   8gbREV05       REV054GB      8GB128MB      128MBNA         NANA               NASingle Die DDR; U41 replaced with schottky diodesSoC without encryption               
TE0808-05-BBE219GI21-A   A15eg9eg_1e2i_4gb  4gbREV05       REV054GB      4GB128MB      128MBNA         NANA               NANA                                     NA
TE0808-05-BBE219GI21-L   AK15eg9eg_1e2i_4gb  4gbREV05       REV054GB      4GB128MB      128MBNA         NA1 mm connectorsNANA                                     NA
TE0808-05-9GI21-S002AZ15eg9eg_1e2i_4gbREV054GB128MBNANACAONA
TE0808-05-9GI21-S003 C15eg9eg_1e2i_4gbREV054GB128MBNANACAOSoC without encryption
TE0808-05-9GI21-S005 KZ9eg_2i_4gb 4gbREV054GB128MBNANACAOCAO
TE0808-05-S004 BBE21-A9eg15eg_2i1e_4gb 4gbREV054GB128MBNANACAONA
TE0808-05-6BE21BBE21-AK6eg15eg_1e_4gb 4gbREV054GB128MBNANANA
TE0808-05-9BE21BBE21-LKAZ9eg15eg_1e_4gb 4gbREV054GB128MBNA1 mm connectorsNANA
TE0808-05-9GI21BBE21-AKL9eg15eg_2i1e_4gb 4gbREV054GB128MBNANA1 mm connectorsNA
TE0808-05-BBE21BBE81-AKA15eg_1e_4gbREV054GB128MBNANANA
TE0808-05-BBE81-S006E9eg15eg_2i1e_4gb 4gbREV054GB128MBNANACAONA
TE0808-05-BBE81-S016EK9eg15eg_1e_4gbREV054GB128MBNANACAONA
TE0808-05-S018S0019eg_1e_2e8gb_4gbDREV054GB8GB128MBNANACAOCAO;Single Die DDR
TE0808-05-S019S0029eg15eg_2e1e_4gbREV054GB128MBNANACAOCAO
TE0808-05-S021S0039eg15eg_2i1e_4gbREV054GB128MBNANACAOCAO
TE0808-05-S022S0046cg9eg_1e2i_4gbREV054GB128MBNANACAOCAO
TE0808-05-S026S0059eg_2i_4gbREV054GB128MBNACAOCAO: without PLL
TE0808-05-9BE21-KZS0069eg_1e2i_4gbREV054GB128MBNA1 mm connectorsCAONACAO
TE0808-05-9BE21-LZS0079eg_1e_4gbREV054GB128MBNA1 mm connectorsNANACAO
TE0808-05-9BE21-AKS0149eg_1e_4gbREV054GB128MBNA1 mm connectorsNANACAO
TE0808-05-9BE21-AZS0169eg_1e_4gbREV054GB128MBNA1 mm connectorsCAONACAO
TE0808-05-9GI21-AZS0189eg_2i2e_4gbREV054GB128MBNANACAONACAO
TE0808-05-BBE21-AZS01915eg9eg_1e2e_4gbREV054GB128MBNANACAONACAO
TE0808-05-9BE81-AS0209eg_1e2i_4gbREV054GB128MBNANACAONACAO
TE0808-05-S001S0219eg_1e2i_8gb_D4gbREV058GB4GB128MBNACAOCAO; Single Die DDR
TE0808-05-S020S0229eg6cg_2i1e_4gbREV054GB128MBNACAOCAO
TE0808-05-S0256eg_1e_4gb_DREV054GB128MBNACAOCAO
TE0808-05-S027S0269eg_2i_4gbREV054GB128MBNACAO:Si5345 not assembledCAO: without PLL
TE0808-05-S029S0279eg_2i_4gbREV054GB128MBNACAOCAO
TE0808-05-S035S02915eg9eg_1e2i_4gbREV054GB128MBNACAOCAO
TE0808-05-S036S03315eg_1e_4gbREV054GB128MBNACAONACAO
TE0808-05-S038S0359eg15eg_1e_4gbREV054GB128MBNACAOCAO
TE0808-05-S039S0366eg15eg_1e_4gbREV054GB128MBNACAOCAO: without PLL
TE0808-05-9GI21-KZS0389eg_2i1e_4gbREV054GB128MBNACAOCAO
TE0808-05-S041S0396eg_1e_4gb_DREV054GB128MBNACAOCAO: without PLL
TE0808-05-BBE81-AS04115eg6eg_1e_4gb_DREV054GB128MBNANACAONACAO

*used as reference


Note: Design contains also Board Part Files for TE0808+TEBF0808 configuration, this board part files are not used for this reference design.

Design supports following carriers:

Scroll Title
anchorTable_HWC
title-alignmentcenter
titleHardware Carrier

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Carrier ModelNotes
Custom PCBuse simple Board Part files, if MIO connected is different to TEBF0808
TEBF0808*Used as reference carrier.
TEBT0808-01Change UART0 to UART1 (MIO68...69) and regenerate design

*used as reference


Additional HW Requirements:

Scroll Title
anchorTable_AHW
title-alignmentcenter
titleAdditional Hardware

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Additional HardwareNotes
------

*used as reference

Content

Page properties
hiddentrue
idComments

Notes :

  • content of the zip file
For general structure and usage of the reference design, see Project Delivery - AMD devices

Design Sources

Scroll Title
anchorTable_DS
title-alignmentcenter
titleDesign sources

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

TypeLocationNotes
Vivado<project folder>\block_design
<project folder>\constraints
<project folder>\ip_lib
<project folder>\board_files
Vivado Project will be generated by TE Scripts
Vitis<project folder>\sw_libAdditional Software Template for Vitis and apps_list.csv with settings automatically for Vitis app generation



Additional Sources

Scroll Title
anchorTable_ADS
title-alignmentcenter
titleAdditional design sources

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

TypeLocationNotes
---------


Prebuilt

Page properties
hiddentrue
idComments

Notes :

  • prebuilt files
  • Template Table:

    • Scroll Title
      anchorTable_PF
      title-alignmentcenter
      titlePrebuilt files

      Scroll Table Layout
      orientationportrait
      sortDirectionASC
      repeatTableHeadersdefault
      style
      widths
      sortByColumn1
      sortEnabledfalse
      cellHighlightingtrue

      File

      File-Extension

      Description

      BIF-File*.bifFile with description to generate Bin-File
      BIN-File*.binFlash Configuration File with Boot-Image (Zynq-FPGAs)
      BIT-File*.bitFPGA (PL Part) Configuration File
      Boot Script-File*.scr

      Distro Boot Script file

      DebugProbes-File*.ltxDefinition File for Vivado/Vivado Labtools Debugging Interface

      Debian SD-Image

      *.img

      Debian Image for SD-Card

      Diverse Reports---Report files in different formats
      Device Tree*.dtsDevice tree (2 possible, one for u-boot and one for linux)
      Hardware-Platform-Description-File*.xsaExported Vivado hardware description file for Vitis and PetaLinux
      LabTools Project-File*.lprVivado Labtools Project File

      MCS-File

      *.mcs

      Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)

      MMI-File

      *.mmi

      File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)

      OS-Image*.ubImage with Linux Kernel (On Petalinux optional with Devicetree and RAM-Disk)
      Software-Application-File*.elfSoftware Application for Zynq or MicroBlaze Processor Systems

      SREC-File

      *.srec

      Converted Software Application for MicroBlaze Processor Systems



Scroll Title
anchorTable_PF
title-alignmentcenter
titlePrebuilt files (only on ZIP with prebult content)

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

File

File-Extension

Description

BIF-File*.bifFile with description to generate Bin-File
BIN-File*.binFlash Configuration File with Boot-Image (Zynq-FPGAs)
BIT-File*.bitFPGA (PL Part) Configuration File
Diverse Reports---Report files in different formats
Hardware-Platform-Description-File*.xsaExported Vivado hardware description file for Vitis and PetaLinux
LabTools Project-File*.lprVivado Labtools Project File
Software-Application-File*.elfSoftware Application for Zynq or MicroBlaze Processor Systems


Download

Reference Design is only usable with the specified Vivado/Vitis/PetaLinux version. Do never use different Versions of Xilinx Software for the same Project.

Page properties
hiddentrue
idComments
Reference Design is available on:

Design Flow

Scroll Ignore
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue


Page properties
hiddentrue
idComments
Notes :
  • Basic Design Steps

  • Add/ Remove project specific description


Note

Reference Design is available with and without prebuilt files. It's recommended to use TE prebuilt files for first launch.

Trenz Electronic provides a tcl based built environment based on Xilinx Design Flow.

See also:

The Trenz Electronic FPGA Reference Designs are TCL-script based project. Command files for execution will be generated with "_create_win_setup.cmd" on Windows OS and "_create_linux_setup.sh" on Linux OS.

TE Scripts are only needed to generate the vivado project, all other additional steps are optional and can also executed by Xilinx Vivado/Vitis GUI. For currently Scripts limitations on Win and Linux OS see: Project Delivery Currently limitations of functionality

Note

Caution! Win OS has a 260 character limit for path lengths which can affect the Vivado tools. To avoid this issue, use Virtual Drive or the shortest possible names and directory locations for the reference design (for example "x:\<project folder>")

  1. Run _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell:

    Code Block
    languagebash
    themeMidnight
    title_create_win_setup.cmd/_create_linux_setup.sh
    ------------------------Set design paths----------------------------
    -- Run Design with: _create_win_setup
    -- Use Design Path: <absolute project path>
    --------------------------------------------------------------------
    -------------------------TE Reference Design---------------------------
    --------------------------------------------------------------------
    -- (0)  Module selection guide, project creation...prebuilt export...
    -- (1)  Create minimum setup of CMD-Files and exit Batch
    -- (2)  Create maximum setup of CMD-Files and exit Batch
    -- (3)  (internal only) Dev
    -- (4)  (internal only) Prod
    -- (c)  Go to CMD-File Generation (Manual setup)
    -- (d)  Go to Documentation (Web Documentation)
    -- (g)  Install Board Files from Xilinx Board Store (beta)
    -- (a)  Start design with unsupported Vivado Version (beta)
    -- (x)  Exit Batch (nothing is done!)
    ----
    Select (ex.:'0' for module selection guide):


  2. Press 0 and enter to start "Module Selection Guide"
  3. Createproject and follow instructions of the product selection guide, settings file will be configured automatically during this process.
    • optional for manual changes: Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd"

      Note

      Note: Select correct one, see also Vivado Board Part Flow

      Important: Use Board Part Files, which did not end with *_tebf0808


  4. Create hardware description file (.xsa file) and export to prebuilt folder

    Code Block
    languagepy
    themeMidnight
    titlerun on Vivado TCL (Script generates design and export files into "<project folder>\prebuilt\hardware\<short name>")
    TE::hw_build_design -export_prebuilt


    Info

    Using Vivado GUI is the same, except file export to prebuilt folder.


  5. Generate Programming Files with Vitis

    Code Block
    languagepy
    themeMidnight
    titlerun on Vivado TCL (Script generates applications and bootable files, which are defined in "test_board\sw_lib\apps_list.csv")
    TE::sw_run_vitis -all
    TE::sw_run_vitis (optional; Start Vitis from Vivado GUI or start with TE Scripts on Vivado TCL)


    Note

    TCL scripts generate also platform project, this must be done manually in case GUI is used. See Vitis



Launch

Scroll Ignore
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue


Page properties
hiddentrue
idComments

Note:

  • Programming and Startup procedure

Programming

Note

Check Module and Carrier TRMs for proper HW configuration before you try any design.

Reference Design is also available with prebuilt files. It's recommended to use TE prebuilt files for first launch.

Xilinx documentation for programming and debugging: Vivado/Vitis/SDSoC-Xilinx Software Programming and Debugging

Get prebuilt boot binaries

  1. Run _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell
  2. Press 0 and enter to start "Module Selection Guide"
    1. Select assembly version
    2. Validate selection
    3. Select create and open delivery binary folder

      Info

      Note: Folder "<project folder>\_binaries_<Article Name>" with subfolder "boot_<app name>" for different applications will be generated


QSPI-Boot mode

  1. Connect JTAG and power on carrier with module
  2. Open Vivado Project with "vivado_open_existing_project_guimode.cmd" or if not created, create with "vivado_create_project_guimode.cmd"

    Code Block
    languagebash
    themeMidnight
    titlerun on Vivado TCL (Script programs BOOT.bin on QSPI flash)
    TE::pr_program_flash -swapp hello_te0808


SD-Boot mode

This does not work, because SD controller is not selected on PS.

JTAG

Load configuration and Application with Vitis Debugger into device

Usage

QSPI Boot:

  1. Prepare HW like described on section Programming
  2. Connect UART USB (most cases same as JTAG)
  3. Select QSPI as Boot Mode

    Info

    Note: See TRM of the Carrier, which is used.


  4. Power On PCB

    Expand
    titleboot process

    1. ZynqMP Boot ROM FSBL from QSPI into OCM,

    2. FSBL init the PS, programs the PL using the bitstream and loads PMU, ATF and U-boot from QSPI into DDR


System Design - Vivado

Scroll Ignore
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue


Page properties
hiddentrue
idComments

Note:

  • Description of Block Design, Constrains... BD Pictures from Export...

Block Design

Scroll Title
anchorFigure_BD
title-alignmentcenter
titleBlock Design


PS Interfaces

Page properties
hiddentrue
idComments

Note:

  • optional for Zynq / ZynqMP only

  • add basic PS configuration
Activated interfaces:
Scroll Title
anchorTable_PSI
title-alignmentcenter
titlePS Interfaces

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

TypeNote
DDR
QSPIMIO
UART0MIO, please select other one, if you have connected UART to second controller or other MIO
SWDT0..1
TTC0..3


Constrains

Basic module constrains

Code Block
languageruby
title_i_bitgen.xdc
set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
set_property BITSTREAM.CONFIG.UNUSEDPIN PULLNONE [current_design]

Design specific constrain

Not needed.

Software Design - Vitis

Scroll Ignore
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue


Page properties
hiddentrue
idComments
Note:
  • optional chapter separate

  • sections for different apps

For Vitis project creation, follow instructions from:

Vitis

Application

Page properties
hiddentrue
idComments

----------------------------------------------------------

FPGA Example

----------------------------------------------------------

scu

MCS Firmware to configure SI5338 and Reset System.

srec_spi_bootloader

TE modified 20212023.2 SREC

Bootloader to load app or second bootloader from flash into DDR

Descriptions:

  • Modified Files: blconfig.h, bootloader.c
  • Changes:
    • Add some console outputs and changed bootloader read address.
    • Add bugfix for 2018.2 qspi flash

xilisf_v5_11

TE modified 20212023.2 xilisf_v5_11

  • Changed default Flash type to 5.

----------------------------------------------------------

Zynq Example:

----------------------------------------------------------

fsbl

TE modified 20222023.2 FSBL

General:

  • Modified Files: main.c, fsbl_hooks.h/.c (search for 'TE Mod' on source code)
  • Add Files: te_fsbl_hooks.h/.c (for hooks and board)

  • General Changes: 
    • Display FSBL Banner and Device ID

Module Specific:

  • Add Files: all TE Files start with te_*
    • READ MAC from EEPROM and make Address accessible by UBOOT (need copy defines on uboot platform-top.h)
    • CPLD access
    • Read CPLD Firmware and SoC Type
    • Configure Marvell PHY


----------------------------------------------------------

ZynqMP Example:

----------------------------------------------------------

zynqmp_fsbl

TE modified 20222023.2 FSBL

General:

  • Modified Files: xfsbl_main.c, xfsbl_hooks.h/.c, xfsbl_board.h/.c (search for 'TE Mod' on source code)
  • Add Files: te_xfsbl_hooks.h/.c (for hooks and board)
  • General Changes: 
    • Display FSBL Banner and Device Name

Module Specific:

  • Add Files: all TE Files start with te_*
    • Si5338 Configuration
    • ETH+OTG Reset over MIO

zynqmp_pmufw

Xilinx default PMU firmware.

----------------------------------------------------------

General Example:

----------------------------------------------------------

hello_te0820

Hello TE0820 is a Xilinx Hello World example as endless loop instead of one console output.

u-boot

U-Boot.elf is generated with PetaLinux. Vitis is used to generate Boot.bin.

Template location: "<project folder>\sw_lib\sw_apps\"

zynqmp_fsbl

TE modified 20222023.2 FSBL

General:

  • Modified Files: xfsbl_main.c, xfsbl_hooks.h/.c, xfsbl_board.h/.c (search for 'TE Mod' on source code)
  • Add Files: te_xfsbl_hooks.h/.c (for hooks and board)
  • General Changes: 
    • Display FSBL Banner and Device Name

hello_te0808

Hello TE0808 is a Xilinx Hello World example as endless loop instead of one console output.

Additional Software

Scroll Ignore
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue


Page properties
hiddentrue
idComments
Note:
  • Add description for other Software, for example SI CLK Builder ...
  • SI5338 and SI5345 also Link to:
No additional software is needed.

Appx. A: Change History and Legal Notices

Scroll Ignore
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue

Document Change History

To get content of older revision go to "Change History" of this page and select older document revision number.

Page properties
hiddentrue
idComments
  • Note this list must be only updated, if the document is online on public doc!
  • It's semi automatically, so do following
    • Add new row below first

    • Copy "Page Information Macro (date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template

    • Metadata is only used of compatibility of older exports


Scroll Title
anchorTable_dch
title-alignmentcenter
titleDocument change history.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths2*,*,3*,4*
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DateDocument Revision

Authors

Description

Page info
infoTypeModified date
dateFormatyyyy-MM-dd
typeFlat

Page info
infoTypeCurrent version
dateFormatyyyy-MM-dd
prefixv.
typeFlat

Page info
infoTypeModified by
typeFlat

  • 2023.2 release
  • new assembly variants
2023-06-14v.45Manuela Strücker
  • 2022.2 release
  • new assembly variants
2023-04-13v.43Manuela Strücker
  • new assembly variants
2022-09-29v.41Manuela Strücker
  • script update
  • new assembly variants
2022-09-12v.40Manuela Strücker
  • update board part files compatible to Vivado 2021.2.1
2022-09-06v.38Manuela Strücker
  • Design Bugfix
2022-03-16v.36Manuela Strücker
  • Release 2021.2
2021-05-25v.35Manuela Strücker
  • Document Style update

2021-05-12

v.34

John Hartfiel

  • update board files
2021-02-05v.33John Hartfiel
  • Release 2020.2
  • Document Style update
2021-02-05v.31John Hartfiel
  • new assembly variants
2020-03-25v.28John Hartfiel
  • script update
2020-01-27v.27John Hartfiel
  • documentation update
2020-01-22v.26John Hartfiel
  • new assembly variants
  • Release 2019.2
2019-08-09v.24John Hartfiel
  • new assembly variants
  • small document style update
2019-05-07v.22John Hartfiel
  • Release 2018.3
2018-07-11v.21John Hartfiel
  • Release 2018.2

2018-03-29

v.20John Hartfiel
  • new assembly variant
2018-02-08v.19John Hartfiel
  • Release 2017.4
2017-12-20v.14John Hartfiel
  • Design Update
  • typo correction on documentation
2017-11-22v.10John Hartfiel
  • Update assembly versions with new Flash size
  • Update HW Table Name
  • Update Design
2017-11-14v.6John Hartfiel
  • Release 2017.2
--all

Page info
infoTypeModified users
dateFormatyyyy-MM-dd
typeFlat

--


Legal Notices

Include Page
IN:Legal Notices
IN:Legal Notices



Scroll Only


HTML
<style>
.wiki-content .columnLayout .cell.aside {
width: 0%;
}</style>



Scroll pdf ignore


Custom_fix_page_content

Table of contents

Table of Contents
outlinetrue