Page History

...

<!--
General Notes:
Designate all graphics and pictures with a number and a description. For example "Figure 1: TE07xx-xx Block Diagram" or "Table 1: Initial delivery state". "Figure x" and "Table x" have to be formatted to bold.  
-->

Overview

Refer to https://shopwiki.trenz-electronic.de/de/Download/?path=Trenz_Electronic/XMODdisplay/PD/TE0790+TRM for downloadablethe current online version of this manual and additionalother technicalavailable documentation of the product.

The Trenz Electronic TE0790 is an universal USB2.0 to JTAG, UART and GPIO adapter based on the FTDI FT2232H USB2 IC. The adapter board converts signals from USB2.0 to standard serial or parallel interfaces of Embedded Systems like JTAG, SPI, I²C and UART.
The board is equipped with a programmable System Controller CPLD provided by Lattice Semiconductor LCMXO2-256HC (MachXO2 Product Family) to control the signals of the configured interfaces. The data stream of the USB2.0 port can be also converted to 8 independent GPIO's or used as FIFO.

...

Table 3: Pin header J2 signal assignment. *pin 1 on header J2
Image Removed

Figure 3: J2 pin header signal assignment

...

v.26

Table 15: Document change history.

...