Page History
...
The 2x5 female socket have to be connected to the corresponding pin header on the target system. The signal assignment of the pin header on the adapter board is fully compatible to original USB blaster. Furthermore there is also an UART interface available and user configurable I/O pin (usable e.g. as Reset signal)-pin reserved for future use.
Following table describes the pin-assignment to the signals of the interfaces:
...
On-board LEDs indicating power-on and user dependentJTAG activity:
| Color | Description |
|---|---|
| Green | Power ON -on LED |
| Red | JTAG Activityactivity |
Table 2: On-board LEDs.
Power
...
Overview
Content Tools