Page History
...
Include Page | ||||
---|---|---|---|---|
|
CPLD Access
- Connect MiniUSB cable to J28 XMOD (XMOD2 label)
- Set DIP Switch S4-3 in ON position
- Power ON the board (ATX Power or external 12V)
- Run "Lattice Diamond Programmer"
Select "Create new project from JTAG chain" and press "OK"
After scan 2 MachXO2 devices should be detected in chain- Select "LCMXO2-1200HC" as "Device" for both columns.
In first column click to "File Name" and then to "...". Select "SCM_REV*.jed" file (Master CPLD File).
In second column click to "File Name" and then to "...". Select "SCS_REV06.jed" file (SlaveCPLD File).
Run "Design"->"Program" from main menu
Wait operations to complete
Available CPLD Firmware
- TEBF0808 CPLDs -Firmware description of Master an Slave CPLD
- TEBF0808 Master CPLD - Firmware description Master CPLD
- TEBF0808 Slave CPLD - Firmware description Slave CPLD
- Default delivered Firmware
- It's recommended to update always both CPLDs together
Overview
Content Tools