Page History
...
The FTDI chip U3 converts signals from USB2.0 to a variety of standard serial and parallel interfaces. Refer to the FTDI data sheet to get information about the capacity of the FT2232H chip.
FTDI FT2232H chip is used in MPPSE mode for JTAG, 6 I/O's of Channel B are routed to the bank 1 of the FPGA SoC and are configured usable for example as UART interface.
The configuration of FTDI FT2232H chip is pre-programmed on the EEPROM U9.
...
Overview
Content Tools