Page History
...
Set B2B Pin J1-148 (JTAG_EN) to VDD (3.3V).
With TEBA0745TEB0745:
- Set DIP S2-2 to ON
Available CPLD Firmware
- TE0745 CPLD - Firmware description
with different Boot mode variants- QSPI/SD
- default delivered firmware
- Boot mode can be changed between QSPI or SD with B2B J2-133 Pin (BOOTMODE/ Zynq (MIO4)).
- QSPI/SD/JTAG
- optional firmware
- Boot mode depends on MIO0 (sd card detection) connected to B2B J2-137 Pin (SD card detection/ Zynq (MIO0))
- sd card detected: Boot mode can be changed between QSPI or SD with B2B J2-133 Pin (BOOTMODE/ Zynq (MIO4)).
- no sd card detected: Boot mode can be changed to JTAG with B2B J2-133 Pin (BOOTMODE/ Zynq (MIO4)).
- QSPI/SD
Download
- TE0745/<PCB Revision>/Firmware/
- Use files from the subfolders of your PCB revision
...
Overview
Content Tools