Page History

...

...

Design supports following carriers:

...

1. _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell:
   
2. Press 0 and enter for minimum setup
3. (optional Win OS) Generate Virtual Drive or use short directory  for the reference design (for example x:\<design name>)
4. Create Project
   
   1. Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd"
      Note: Select correct one, see TE Board Part Files
5. Create HDF and export to prebuilt folder
   
   1. Run on Vivado TCL: TE::hw_build_design -export_prebuilt
      Note: Script generate design and export files into \prebuilt\hardware\<short dir>. Use GUI is the same, except file export to prebuilt folder
6. Generate Programming Files with HSI/SDK
   
   1. Run on Vivado TCL: TE::sw_run_hsi
      Note: Scripts generate applications and bootable files, which are defined in "sw_lib\apps_list.csv"
   2. (alternative) Start SDK with Vivado GUI or start with TE Scripts on Vivado TCL: TE::sw_run_sdk
      Note: See SDK Projects
7. Copy Application (hello_te0711te0725.elf) into \firmware\microblaze_0\
8. Regenerate Design:
   1. Run on Vivado TCL: TE::hw_build_design -export_prebuilt
      Note: App from Firmware folder will be add into BlockRAM. If you add other app, you must select *.elf manually on Vivado
   2. (alternative) Use SDK or Vivado to update generate Bitfile with new Application and regenerate mcs manually.

...

1. Prepare HW like described on section 49742547 Programming
2. Connect UART USB (most cases same as JTAG)
3. Power On PCB

   Note: FPGA Loads Bitfile from Flash

...

...