Page History
...
For the boot process prior to powering up the board settings must be done via DIP-Switch S3-3 and S3-4. Four boot modes can be selected:
| S3-3 (SC_SW1) | S3-4 (SC_SW2) | MIO Location | Description | Notes |
|---|---|---|---|---|
| OFF | OFF | MIO[43:38] | SD1 Boot Mode (SD-Card on J11) | Supports SD 2.0. |
| OFF | ON | MIO[29:26] | PJTAG0 | PS JTAG connection 0 option. |
| ON | OFF | MIO[12:0] | QSPI32 | 32-bit addressing, configured with dual on-board QSPI Flash Memory. |
| ON | ON | - | JTAG | Dedicated PS interface. |
Table 2: Available boot modes of the on-board Zynq MPSoC
...
| HTML |
|---|
<!-- Connections and Interfaces or B2B Pin's which are accessible by User --> |
FMC HPC Connectors
| draw.io Diagram | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Table x: General overview of PL I/O signals connected to the B2B connectors.
...
Overview
Content Tools