Page History

...

<!--
Connections and Interfaces or B2B Pin's which are accessible by User
  -->

FMC HPC Connectors

The TEB0911 Ultrarack+ offers 6FMC (FPGA Mezzanine Card) connectors with high pin count (HPC) which provides as an ANSI/VITA 57.1 standard a modular interface to the MPSoCs FPGA and exposes numerous of its I/O pins for use by other mezzanine modules and expansion cards.

The connector supports single ended and differential signaling as the I/O's are routed from the FPGA banks as LVDS-pairs to the FMC connector.

Following diagram gives an overview of the FMC connectors and their connections to the Zynq Ultrascale+ MPSoC and the System Controller CPLD U27:

Table Figure x: General overview of PL I/O signals connected to the B2B connectors.the FMC HPC connectors

All PS MIO banks are powered by on-module DC-DC power rail. All PL I/O banks have separate VCCO input pins in the B2B connectors, valid VCCO should be supplied from the carrier board.

...