Page History

...

• Set DIP S1:1 to OFF 
• Connect 12V Power source
  
• Connect Arrow USB Programmer
  

CPLD Programming

1. Run Quartus Prime Lite Edition
2. Click Image Removedto run "Programmer"
3. If you see "No Hardware" Image Removed :
   Click "Hardware Setup..." and select "Arrow-USB-Blaster" Image Removed
4. Press Image Removedand select *.pof file to program.
5. Check "Program/Configure" checkboxes
    Image Removed
6. Press
    Image Removed
7. After the end of programming, progress bar should show you
    Image Removed

Available CPLD Firmware

• - Firmware description
  • TEC0850 MAX10 - SMB Firmware

General instructions