Skip to end of metadata
Go to start of metadata

Table of contents

CPLD Access  

Remove TEC0850 from Backplane

  • Set DIP S1:1 to OFF 
  • Connect 12V Power source
  • Connect Arrow USB Programmer

CPLD Programming

  1. Run Quartus Prime Lite Edition
  2. Click to run "Programmer"
  3. If you see "No Hardware"  :
    Click "Hardware Setup..." and select "Arrow-USB-Blaster" 
  4. Press and select *.pof file to program.
  5. Check "Program/Configure" checkboxes
  6. Press
  7. After the end of programming, progress bar should show you

Available CPLD Firmware

  • No labels