Page History
Template Revision 2.7 - on construction
...
HTML |
---|
<!-- tables have all same width (web max 1200px and pdf full page(640px), flexible width or fix width on menu for single column can be used as before) -->
<style>
.wrapped{
width: 100% !important;
max-width: 1200px !important;
}
</style> |
...
hidden | true |
---|---|
id | Comments |
Important General Note:
...
Export PDF to download, if vivado revision is changed!
Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro
...
Figure template (note: inner scroll ignore/only only with drawIO object):
...
anchor | Figure_xyz |
---|---|
title | Text |
Scroll Ignore |
---|
Create DrawIO object here: Attention if you copy from other page, use |
Scroll Only |
---|
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed |
...
Table template:
- Layout macro can be use for landscape of large tables
- Set column width manually(can be used for small tables to fit over whole page) or leave empty (automatically)
...
anchor | Table_xyz |
---|---|
title | Text |
...
Scroll pdf ignore | ||||
---|---|---|---|---|
Table of contents
|
Overview
Page properties | ||||
---|---|---|---|---|
| ||||
Notes :
|
Refer to http://trenz.org/te0724-info for the current online version of this manual and other available documentation.
Key Features
Page properties | ||||
---|---|---|---|---|
| ||||
Notes :
|
Excerpt |
---|
|
Revision History
Page properties | ||||
---|---|---|---|---|
| ||||
Notes :
|
...
anchor | Table_DRH |
---|---|
title | Design Revision History |
...
- script update
...
- 2019.2 update
- Vitis support
- FSBL changes
- petalinux device tree and u-boot update
...
- bugfix IO constrains
...
TE0724-test_board-vivado_2018.2-build_04_20190613114927.zip
TE0724-test_board_noprebuilt-vivado_2018.2-build_04_20190613115049.zip
...
- add app to get access to EEPROM U10
...
- Important Board Part File Update
- change DDR3 to DDR3 Low Power
...
- initial release
...
Requirements
Software
Page properties | ||||
---|---|---|---|---|
| ||||
Notes :
|
...
anchor | Table_KI |
---|---|
title | Known Issues |
...
...
...
Hardware
Page properties | ||||
---|---|---|---|---|
| ||||
Notes :
|
Basic description of TE Board Part Files is available on TE Board Part Files.
Complete List is available on <design name>/board_files/*_board_files.csv
Design supports following modules:
...
anchor | Table_HWM |
---|---|
title | Hardware Modules |
...
Design supports following carriers:
...
anchor | Table_HWC |
---|---|
title | Hardware Carrier |
...
Additional HW Requirements:
...
anchor | Table_AHW |
---|---|
title | Additional Hardware |
...
Content
Page properties | ||||
---|---|---|---|---|
| ||||
Notes :
|
For general structure and of the reference design, see Project Delivery - Xilinx devices
...
...
...
...
...
...
Additional Sources
...
...
...
...
...
...
...
...
...
...
...
...
File
...
File-Extension
...
Description
...
Debian SD-Image
...
*.img
...
Debian Image for SD-Card
...
MCS-File
...
*.mcs
...
Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
...
MMI-File
...
*.mmi
...
File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
...
SREC-File
...
*.srec
...
Converted Software Application for MicroBlaze Processor Systems
...
anchor | Table_PF |
---|---|
title | Prebuilt files (only on ZIP with prebult content) |
...
File
...
File-Extension
...
Description
...
Download
Reference Design is only usable with the specified Vivado/Vitis/PetaLinux version. Do never use different Versions of Xilinx Software for the same Project.
Page properties | ||||
---|---|---|---|---|
| ||||
|
Reference Design is available on:
Design Flow
Page properties | ||||
---|---|---|---|---|
| ||||
Notes :
|
Note |
---|
Reference Design is available with and without prebuilt files. It's recommended to use TE prebuilt files for first lunch. |
Trenz Electronic provides a tcl based built environment based on Xilinx Design Flow.
See also:
...
The Trenz Electronic FPGA Reference Designs are TCL-script based project. Command files for execution will be generated with "_create_win_setup.cmd" on Windows OS and "_create_linux_setup.sh" on Linux OS.
TE Scripts are only needed to generate the vivado project, all other additional steps are optional and can also executed by Xilinx Vivado/SDK GUI. For currently Scripts limitations on Win and Linux OS see: Project Delivery Currently limitations of functionality
- _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell:
- Press 0 and enter to start "Module Selection Guide"
- (optional Win OS) Generate Virtual Drive or use short directory for the reference design (for example x:\<design name>)
- Create Project (follow instruction of the product selection guide), settings file will be configured automatically during this process
- (optional for manual changes) Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd"
Note: Select correct one, see alsoTE Board Part Files
- (optional for manual changes) Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd"
- Create XSA and export to prebuilt folder
- Run on Vivado TCL: TE::hw_build_design -export_prebuilt
Note: Script generate design and export files into \prebuilt\hardware\<short dir>. Use GUI is the same, except file export to prebuilt folder
- Run on Vivado TCL: TE::hw_build_design -export_prebuilt
- Create Linux (uboot.elf and image.ub) with exported XSA
- XSA is exported to "prebuilt\hardware\<short name>"
Note: HW Export from Vivado GUI create another path as default workspace. - Create Linux images on VM, see PetaLinux KICKstart
- Use TE Template from /os/petalinux
- XSA is exported to "prebuilt\hardware\<short name>"
- Add Linux files (uboot.elf and image.ub) to prebuilt folder
- "prebuilt\os\petalinux\<ddr size>" or "prebuilt\os\petalinux\<short name>"
- Generate Programming Files with Vitis
- Run on Vivado TCL: TE::sw_run_vitis -all
Note: Scripts generate applications and bootable files, which are defined in "sw_lib\apps_list.csv" - (alternative) Start SDK with Vivado GUI or start with TE Scripts on Vivado TCL: TE::sw_run_vitis
Note: TCL scripts generate also platform project, this must be done manuelly in case GUI is used. See Vitis
- Run on Vivado TCL: TE::sw_run_vitis -all
Launch
Programming
Page properties | ||||
---|---|---|---|---|
| ||||
Note:
|
Note |
---|
Check Module and Carrier TRMs for proper HW configuration before you try any design. |
Xilinx documentation for programming and debugging: Vivado/SDK/SDSoC-Xilinx Software Programming and Debugging
Get prebuilt boot binaries
- _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell
- Press 0 and enter to start "Module Selection Guide"
- Select assembly version
- Validate selection
- Select Create and open delivery binary folder
Note: Folder (<project foler>/_binaries_<Artikel Name>) with subfolder (boot_<app name>) for different applications will be generated
QSPI
Optional for Boot.bin on QSPI Flash and image.ub on SD.
- Connect JTAG and power on carrier with module
- Open Vivado Project with "vivado_open_existing_project_guimode.cmd" or if not created, create with "vivado_create_project_guimode.cmd"
- Type on Vivado TCL Console: TE::pr_program_flash_binfile -swapp u-boot
Note: To program with SDK/Vivado GUI, use special FSBL (zynqmp_fsbl_flash) on setup
optional "TE::pr_program_flash_binfile -swapp hello_te0724" possible - Set Boot Mode to QSPI.
- Depends on Carrier, see carrier TRM.
- Copy image.ub on SD-Card
- use files from (<project foler>/_binaries_<Articel Name>)/boot_linux from generated binary folder,see: Get prebuilt boot binaries
- or use prebuilt file location, see <design_name>/prebuilt/readme_file_location.txt
- Insert SD-Card
SD
- Copy image.ub and Boot.bin on SD-Card.
- use files from (<project foler>/_binaries_<Articel Name>)/boot_linux from generated binary folder,see: Get prebuilt boot binaries
- or use prebuilt file location, see <design_name>/prebuilt/readme_file_location.txt
- Set Boot Mode to SD-Boot.
- Depends on Carrier, see carrier TRM.
- Insert SD-Card in SD-Slot.
JTAG
Not used on this Example.
Usage
- Prepare HW like described on section 70156368
- Connect UART USB (most cases same as JTAG)
- Select SD Card as Boot Mode (or QSPI depending on programming option)
Note: See TRM of the Carrier, which is used. - Power On PCB
Note: 1. Zynq Boot ROM loads FSBL from SD into OCM, 2. FSBL loads U-boot from SD into DDR, 3. U-boot load Linux from SD into DDR
Linux
- Open Serial Console (e.g. putty)
- Speed: 115200
- COM Port: Win OS, see device manager, Linux OS see dmesg |grep tty (UART is *USB1)
- Linux Console:
Note: Wait until Linux boot finished For Linux Login use:- User Name: root
- Password: root
- You can use Linux shell now.
- I2C 0 Bus type: i2cdetect -y -r 0
- RTC check: dmesg | grep rtc
- ETH0 works with udhcpc
...
Page properties | ||||
---|---|---|---|---|
| ||||
Note:
|
Open Vivado HW-Manager and add VIO signal to dashboard (*.ltx located on prebuilt folder)
- Control:
- CAN Standby control
- module LED control
- TEB0724 LED control
- Monitoring:
- TEB0724 Button
- PMIC GPIO
- PHY 125MHz
- TEB0724 Button
Scroll Title | ||||
---|---|---|---|---|
| ||||
System Design - Vivado
Page properties | ||||
---|---|---|---|---|
| ||||
Note:
|
Block Design
Scroll Title | ||||
---|---|---|---|---|
| ||||
PS Interfaces
...
anchor | Table_PSI |
---|---|
title | PS Interfaces |
...
...
...
...
...
...
Constrains
Basic module constrains
Code Block | ||||
---|---|---|---|---|
| ||||
#
# Common BITGEN related settings for TE0720 SoM
#
set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
set_property CONFIG_VOLTAGE 3.3 [current_design]
set_property CFGBVS VCCO [current_design]
|
Design specific constrain
Code Block | ||||
---|---|---|---|---|
| ||||
# can
set_property PACKAGE_PIN T11 [get_ports CAN_0_tx]
set_property IOSTANDARD LVCMOS33 [get_ports CAN_0_tx]
set_property PACKAGE_PIN T10 [get_ports CAN_0_rx]
set_property IOSTANDARD LVCMOS33 [get_ports CAN_0_rx]
set_property PACKAGE_PIN U13 [get_ports {CAN_STBY[0]}]
set_property IOSTANDARD LVCMOS33 [get_ports {CAN_STBY[0]}]
# led
set_property PACKAGE_PIN U12 [get_ports {LED_RG[0]}]
set_property PACKAGE_PIN W13 [get_ports {LED_RG[1]}]
set_property IOSTANDARD LVCMOS33 [get_ports {LED_RG[*]}]
# CLK
set_property PACKAGE_PIN U14 [get_ports {PHY_CLK125M[0]}]
set_property IOSTANDARD LVCMOS33 [get_ports {PHY_CLK125M[0]}]
# PWR GPIO
set_property PACKAGE_PIN T12 [get_ports {PWR_GPIO01[0]}]
set_property PACKAGE_PIN U15 [get_ports {PWR_GPIO01[1]}]
set_property IOSTANDARD LVCMOS33 [get_ports {PWR_GPIO01[*]}]
# TEB0724 Button
set_property PACKAGE_PIN Y19 [get_ports {TEB0724_BUTTON_S24[0]}]
set_property PACKAGE_PIN Y18 [get_ports {TEB0724_BUTTON_S24[1]}]
set_property IOSTANDARD LVCMOS33 [get_ports {TEB0724_BUTTON_S24[*]}]
# TEB0724 LED
set_property PACKAGE_PIN P18 [get_ports {TEB0724_ULED[0]}]
set_property PACKAGE_PIN N17 [get_ports {TEB0724_ULED[1]}]
set_property PACKAGE_PIN R17 [get_ports {TEB0724_ULED[2]}]
set_property PACKAGE_PIN R16 [get_ports {TEB0724_ULED[3]}]
set_property PACKAGE_PIN Y14 [get_ports {TEB0724_ULED[4]}]
set_property PACKAGE_PIN W14 [get_ports {TEB0724_ULED[5]}]
set_property IOSTANDARD LVCMOS33 [get_ports {TEB0724_ULED[*]}] |
Software Design - Vitis
Page properties | ||||
---|---|---|---|---|
| ||||
Note:
|
For SDK project creation, follow instructions from:
Application
...
hidden | true |
---|---|
id | Comments |
----------------------------------------------------------
FPGA Example
scu
MCS Firmware to configure SI5338 and Reset System.
srec_spi_bootloader
TE modified 2019.2 SREC
Bootloader to load app or second bootloader from flash into DDR
Descriptions:
- Modified Files: blconfig.h, bootloader.c
- Changes:
- Add some console outputs and changed bootloader read address.
- Add bugfix for 2018.2 qspi flash
xilisf_v5_11
TE modified 2019.2 xilisf_v5_11
- Changed default Flash type to 5.
----------------------------------------------------------
Zynq Example:
zynq_fsbl
TE modified 2019.2 FSBL
General:
- Modified Files:main.c, fsbl_hooks.h/.c (search for 'TE Mod' on source code)
Add Files: te_fsbl_hooks.h/.c(for hooks and board)\n\
- General Changes:
- Display FSBL Banner and Device ID
Module Specific:
- Add Files: all TE Files start with te_*
- READ MAC from EEPROM and make Address accessible by UBOOT (need copy defines on uboot platform-top.h)
- CPLD access
- Read CPLD Firmware and SoC Type
- Configure Marvell PHY
zynq_fsbl_flash
TE modified 2019.2 FSBL
General:
- Modified Files: main.c
- General Changes:
- Display FSBL Banner
- Set FSBL Boot Mode to JTAG
- Disable Memory initialisation
ZynqMP Example:
----------------------------------------------------------
zynqmp_fsbl
TE modified 2019.2 FSBL
General:
- Modified Files: xfsbl_main.c, xfsbl_hooks.h/.c, xfsbl_board.h/.c(search for 'TE Mod' on source code)
- Add Files: te_xfsbl_hooks.h/.c (for hooks and board)\n\
- General Changes:
- Display FSBL Banner and Device Name
Module Specific:
- Add Files: all TE Files start with te_*
- Si5338 Configuration
- ETH+OTG Reset over MIO
zynqmp_fsbl_flash
TE modified 2019.2 FSBL
General:
- Modified Files: xfsbl_initialisation.c, xfsbl_hw.h, xfsbl_handoff.c, xfsbl_main.c
- General Changes:
- Display FSBL Banner
- Set FSBL Boot Mode to JTAG
- Disable Memory initialisation
zynqmp_pmufw
Xilinx default PMU firmware.
----------------------------------------------------------
General Example:
hello_te0820
Hello TE0820 is a Xilinx Hello World example as endless loop instead of one console output.
u-boot
U-Boot.elf is generated with PetaLinux. Vitis is used to generate Boot.bin.
Template location: ./sw_lib/sw_apps/
zynq_fsbl
TE modified 2019.2 FSBL
General:
- Modified Files:main.c, fsbl_hooks.h/.c (search for 'TE Mod' on source code)
Add Files: te_fsbl_hooks.h/.c(for hooks and board)\n\
- General Changes:
- Display FSBL Banner and Device ID
Module Specific:
- Add Files: all TE Files start with te_*
- enable I2C Buffer over MIO38, needed for RTC and external I2C
zynq_fsbl_flash
TE modified 2019.2 FSBL
General:
- Modified Files: main.c
- General Changes:
- Display FSBL Banner
- Set FSBL Boot Mode to JTAG
- Disable Memory initialisation
hello_te0724
Hello World App in Endless loop.
u-boot
U-Boot.elf is generated with PetaLinux. Vitis is used to generate Boot.bin.
Software Design - PetaLinux
Page properties | ||||
---|---|---|---|---|
| ||||
Note:
|
For PetaLinux installation and project creation, follow instructions from:
Config
Start with petalinux-config or petalinux-config --get-hw-description
Changes:
- CONFIG_SUBSYSTEM_ETHERNET_PS7_ETHERNET_0_MAC=""
U-Boot
Start with petalinux-config -c u-boot
Changes:
CONFIG_ENV_IS_NOWHERE=y
# CONFIG_ENV_IS_IN_SPI_FLASH is not set
CONFIG_I2C_EEPROM=y
CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xFA
CONFIG_SYS_I2C_EEPROM_ADDR=0x53
CONFIG_SYS_I2C_EEPROM_BUS=0
CONFIG_SYS_EEPROM_SIZE=256
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=0
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=0
CONFIG_SYS_I2C_EEPROM_ADDR_LEN=1
CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0
Change platform-top.h:
...
language | js |
---|
Device Tree
Code Block | ||
---|---|---|
| ||
/include/ "system-conf.dtsi"
/ {
chosen {
xlnx,eeprom = &eeprom;
};
};
/* default */
/* QSPI PHY */
&qspi {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
flash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
#address-cells = <1>;
#size-cells = <1>;
};
};
/* ETH PHY */
&gem0 {
phy-handle = <&phy0>;
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy0: phy@0 {
compatible = "marvell,88e1510";
device_type = "ethernet-phy";
reg = <1>;
};
};
};
/* I2C */
//pmic
&i2c1 {
pmic0: da9062@58 {
compatible = "dlg,da9062";
reg = <0x58>;
interrupt-parent = <&gpio0>;
interrupts = <0 8>;
interrupt-controller;
rtc {
compatible = "dlg,da9062-rtc";
};
};
//MAC EEPROM
eeprom: eeprom@53 {
compatible = "atmel,24c08";
reg = <0x53>;
};
//user EEPROM
eeprom50: eeprom@50 {
compatible = "atmel,24c128";
reg = <0x50>;
};
};
|
Kernel
Start with petalinux-config -c kernel
Changes:
CONFIG_REGMAP_IRQ=y
# CONFIG_DA9062_THERMAL is not set
# CONFIG_DA9062_WATCHDOG is not set
CONFIG_MFD_DA9062=y
# CONFIG_REGULATOR_DA9062 is not set
CONFIG_RTC_DRV_DA9063=y
Rootfs
Start with petalinux-config -c rootfs
Changes:
- i2c-tools
- CONFIG_busybox-httpd=y (for web server app)
- CONFIG_packagegroup-petalinux-utils(util-linux,cpufrequtils,bridge-utils,mtd-utils,usbutils,pciutils,canutils,i2c-tools,smartmontools,e2fsprogs)
Applications
startup
Script App to load init.sh from SD Card if available.
...
...
...
...
...
Document Change History
To get content of older revision got to "Change History" of this page and select older document revision number.
Page properties | ||||
---|---|---|---|---|
| ||||
|
HTML |
---|
<!--
Generate new entry:
1:add new row below first
2:Copy Page Information Macro(date+user) Preview, Page Information Macro Preview
3.Update Metadate =Page Information Macro Preview+1
--> |
...
...