Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Page properties
hiddentrue
idComments

Template Revision 2.3

TRM Name always "TE Series Name" +TRM, for example "TE0728 TRM"


HTML
<!-- tables have all same width (web max 1200px and PDF full page(640px), flexible width or fix width on menu for single column can be used as before) -->
<style>
.wrapped{
  width: 100% !important;
  max-width: 1200px !important;
 }
</style>


Page properties
hiddentrue
idComments

Important General Note:

  • If some section is configurable and depends on Firmware, please refer to the addition page (for example CPLD). If not available, add note, that this part is configurable
  • Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro

    • Use "Scroll Title" macro for pictures and table labels. Figure number must be set manually at the moment (automatically enumeration is planned by scrollPDF)
      • Figure template:

        Scroll Title
        anchorFigure_anchorname
        titleText


        Scroll Ignore

        Create DrawIO object here: Attention if you copy from other page, objects are only linked.


        Scroll Only

        Image link to the generate DrawIO PNG file of this page. This is a workaround until scroll PDF export bug is fixed



      • Table template:

        • Layout macro can be use for landscape of large tables

      • Scroll Title
        anchorTable_tablename
        titleText

        Scroll Table Layout
        orientationportrait
        sortDirectionASC
        repeatTableHeadersdefault
        style
        widths
        sortByColumn1
        sortEnabledfalse
        cellHighlightingtrue

        ExampleComment
        12



    • The anchors of the Scroll Title should be named consistant across TRMs. An incomplete list of examples is given below

      • <type>_<main section>_<name>

        • type: Figure, Table
        • main section:
          • "OV" for Overview
          • "SIP" for Signal Interfaces and Pins,
          • "OBP" for On board Peripherals,
          • "PWR" for Power and Power-On Sequence,
          • "B2B" for Board to Board Connector,
          • "TS" for Technical Specification
          • "VCP" for Variants Currently in Production
          •  "RH" for Revision History
        • name: custom, some fix names, see below
      • Fix names:
        • "Figure_OV_BD" for Block Diagram

        • "Figure_OV_MC" for Main Components

        • "Table_OV_IDS" for Initial Delivery State

        • "Table_PWR_PC" for Power Consumption

        • "Figure_PWR_PD" for Power Distribution
        • "Figure_PWR_PS" for Power Sequence
        • "Figure_PWR_PM" for Power Monitoring
        • "Table_PWR_PR" for Power Rails
        • "Table_PWR_BV" for Bank Voltages
        • "Table_TS_AMR" for Absolute_Maximum_Ratings

        • "Table_TS_ROC" for Recommended_Operating_Conditions

        • "Figure_TS_PD" for Physical_Dimensions
        • "Table_VCP_SO" for TE_Shop_Overview
        • "Table_RH_HRH" for Hardware_Revision_History

        • "Figure_RH_HRN" for Hardware_Revision_Number
        • "Table_RH_DCH" for Document_Change_History
    • Use Anchor in the document: add link macro and add "#<anchor name>
    • Refer to Anchor from external : <page URL>#<page name without space characters>-<anchor name>



Page properties
hiddentrue
idComments

-----------------------------------------------------------------------


Page properties
hiddentrue
idComments

Note for Download Link of the Scroll ignore macro:


Scroll Ignore

Download PDF version of this document.


Scroll pdf ignore

Table of Contents

Table of Contents

Overview

Page properties
hiddentrue
idComments

Notes :

The Trenz Electronic TEB0728 Carrier Board provides functionalities for testing, evaluation and development purposes of company's 6 x 6 cm SoMs. The Carrier Board is equipped with various components and connectors for different configuration setups. See "6 x 6 SoM" Carriers" page for more information about 6 x 6 cm SoMs. 

Refer to http://trenz.org/TEB0728-info for the current online version of this manual and other available documentation.

Key Features

Page properties
hiddentrue
idComments
    • Note:
  • Samtec Tiger Eye Terminal Socket ( 80 pins, 2 rows)
  • Micro SD card socket
  • 3 User LEDs, Red, Yellow, Green
  • Two RJ45 Gigabit Ethernet socket
  • Trenz 6x6 module connector strips (3 x Samtec Tiger Eye series connectors)
  • Barrel Jack for 5V power supply 
  • One user push button

Block Diagram

Scroll Title
anchorFigure_OV_BD
titleTEB0728 block diagram


Scroll Ignore
draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision17
diagramNameTE0728_BD1
simpleViewerfalse
width
linksauto
tbstylehidden
diagramWidth641


Scroll Only


Main Components

Page properties
hiddentrue
idComments

Notes :

  • Picture of the PCB (top and bottom side) with labels of important components
  • Add List below


Scroll Title
anchorFigure_OV_MC
titleTEB0728 main components


Scroll Ignore

draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision21
diagramNameTE0728_MC
simpleViewerfalse
width
linksauto
tbstylehidden
diagramWidth642


Scroll Only


  1. User push-button, S1
  2.  Jumper (Boot Mode), J4
  3. External connector (VG96) placeholder, J5 / J6
  4. LEDs , D1
  5. SD Card Connector, J10
  6. Board to Board Connector, J1-J2-J3
  7. RJ45 Gigabit Ethernet connector, J7-J8
  8. XMOD JTAG- / UART-header, JB1
  9. Barrel jack for 5V power supply, J9
  10.  Jumper(VCCIO_13), J11
  11. CR1220 Backup-Battery holder, B1

Initial Delivery State

There is no hardware component to be programmed on the carrier.

Scroll Title
anchorTable_OV_IDS
titleInitial delivery state of programmable devices on the module

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Storage device name

Content

Notes

---

------


Configuration Signals

Page properties
hiddentrue
idComments
  • Overview of Boot Mode, Reset, Enables,

Boot Process

Scroll Title
anchorTable_OV_BP
titleBoot process.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Signal

DesignatorB2BJumperBoot Mode

Boot_R

J4

J2-11

Open

QSPI

ShortSD Card


Reset Process

There is a user push button which is used for RESET signal.

Scroll Title
anchorTable_OV_BP
titleReset process.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Signal

DesignatorB2BActive Level

RESET

S1

J2-7

Active High


Signals, Interfaces and Pins

Page properties
hiddentrue
idComments

Notes :

  • For carrier or stand-alone boards use subsection for every connector type (add designator on description, not on the subsection title), for example:
    • SD
    • USB
    • ETH
    • FMC
    • ...
  • For modules which needs carrier use only classes and refer to B2B connector if more than one is used, for example
    • JTAG
    • UART
    • I2C
    • MGT
    • ...

Board to Board (B2B) I/Os

Number of I/O signals FPGA bank numbers connected to the B2B connectors:

Scroll Title
anchorTable_SIP_B2B
titleGeneral overview of PL I/O signals and SoM's interfaces connected to the B2B connectors.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

B2B ConnectorInterfacesNumber of I/ONotes
J1

User I/O48 singel ended, 24 differentialConnected to Bank 13
4 Single endedMIO10...13
CANH , CANL2 single endedMIO8, MIO9
J2

User I/O22 singel ended, 11 differential
38 single endedMIO16...53
SoM Control Signals5RESET, RST_OUT, BOOT_R,
JTAG Interface4TCK , TDO, TDI, TMS

J3


User I/O20 Single ended, 10 differential


Connected to Bank 35
34 single ended, 17 differentialConnected to Bankd 33
Ethernet 14 single ended, 2 differentialETH_CTREF , ETH_TD+, ETH_TD- , ETH_RD+, ETH_RD-, ETH_LED1, ETH_LED2, ETH_LED3
Ethernet 24 single ended, 2 differentialETH_CTREF , ETH_TD+, ETH_TD- , ETH_RD+, ETH_RD-, ETH_LED1, ETH_LED2, ETH_LED3


On-board Connector

Scroll Title
anchorTable_SIP_B2B
titleGeneral PL I/O to B2B connectors information

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

B2B ConnectorInterfacesNumber of I/ONotes
J5

User I/O48 singel ended, 24 differentialConnected to Bank 13
34 single ended, 17 differentialConnected to Bank 33
J6

User I/O42 singel ended, 21 differential
27 single endedMIO16... MIO39 + MIO51...53
4 single endedMIO10...13
SoM Control Signals3RESET, RST_OUT, BOOT_R
JTAG Interface4TCK , TDO, TDI, TMS

CANH , CANL

2 single endedMIO8, MIO9


JTAG Interface Base

JTAG access to the TEB0728 Trenz module is available through B2B connector J2. JTAG Programmer TE0790_02 is provided by Trenz Electronic, More information is available here.

Scroll Title
anchorTable_SIP_JTG
titleJTAG interface Base

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Designator

B2B Pin

XMOD Header JB1Note
AJ2-15JB1-3UART Txd - input
BJ2-16JB1-7UART Rxd - Output
CJ2-12JB1-4JTAG-TMS
DJ2-10JB1-8JTAG-TDI
FJ2-8JB1-10JTAG-TDO
HJ2-6JB1-12

JTAG-TCK

GJ2-7JB1-11RESET will be connected to Push Button on JTAG Programmer
3.3V-JB1-5connected to GND
VIOJ2-2/4JB1-6VIO is connected to 3.3V which is supplied by carrier


SD Card Socket

Power supply voltage for SD card holder is 3.3V.

Scroll Title
anchorTable_OBP
titleOn board peripherals

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

SignalsB2BNotes
CMDJ2-29
CLKJ2-34
DAT0J2-37
DAT1J2-40
DAT2J2-32
CD/DAT3J2-31
CDJ2-35
WPJ2-33


RJ45 Connector

Both Ethernet sockets,ETH1 and ETH2, are connected to the Board to Board (B2B) J3 on the carrier.

Scroll Title
anchorTable_OBP_SPI
titleQuad SPI interface MIOs and pins

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

SignalETH1ETH2Notes
ETH_TD+J3-58J3-28Transfer
ETH_TD-J3-56J3-26
ETH_RD+J3_52J3-22Receive
ETH_RD-J3-50J3-20
ETH_CTREFJ3_57J3-25
ETH_LED1J3-55J3-23Yellow LED- Activity
ETH_LED3J3-51J3-19Green Green- Link


On-board Peripherals

Page properties
hiddentrue
idComments

Notes :

  • add subsection for every component which is important for design, for example:
    • Two 100 Mbit Ethernet Transciever PHY
    • USB PHY
    • Programmable Clock Generator
    • Oscillators
    • eMMCs
    • RTC
    • FTDI
    • ...
    • DIP-Switches
    • Buttons
    • LEDs

Push button

Scroll Title
anchorTable_OBP_Push_Button
titleOn-board push button

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DesignatorConnected toB2BActive LevelNote
S1-ARESETJ2-7Active highGeneral Input RESET


Jumpers

Scroll Title
anchorTable_OBP_Jumpers
titleOn-board Jumpers

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DesignatorConnected toB2BNote
J4Boot_RJ2-11Open: QSPI
Short: SD Card



Scroll Title
anchorTable_OBP_Jumpers
titleOn-board Jumpers

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DesignatorConnected toVoltageNote
J11VCCIO_133.3 VPin 1 and the middle pin are connected
1.8 VPin 3 and the middle pin are connected



LEDs

Scroll Title
anchorTable_OBP_LED
titleOn-board LEDs

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DesignatorColorB2BActive LevelNote
D1-ARedJ2-30Active high
D1-BYellowJ2-38Active high
D1-CGreenJ2-36Active high


Power and Power-On Sequence

Power Supply

Single 5V power supply with minimum current capability of 2.5A is recommended to operate the board.

Power Consumption

Scroll Title
anchorTable_PWR_PC
titlePower Consumption

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Power Input PinTypical Current
VIN

TBD*

VBATT

TBD*


* TBD - To Be Determined

Power Supply

Scroll Title
anchorTable_PWR_PR
titleModule power rails.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Power Rail Name

B2B Connector

DirectionNotes
VINJ1-1, J1-3Input5V
VBATJ2-1InputBattery for RTC
VCCO_13J1-39InputSelectable over Jumper J11


Power Rails

Scroll Title
anchorTable_PWR_PR
titleCarrier Power Rails.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Module Connector (B2B) DesignatorVCC / VCCIODirectionPinsNotes
JB1

VIN

Input

1,3

Up to 12V carrier supply voltage
3.3VInput19PL IO-bank VCCIO
VCCO_13Input391.8V or 3.3V
JB2

3.3V

Input

2, 4

3.3V module supply voltage
1.8VInput5PL IO-bank VCCIO
VBATTInput1RTC buffer voltage
JB3----


Board to Board Connectors

Page properties
hiddentrue
idComments
  • This section is optional and only for modules.
  • use "include page" macro and link to the general B2B connector page of the module series, for example: 6 x 6 SoM LSHM B2B Connectors

    Include Page
    PD:6 x 6 SoM LSHM B2B Connectors
    PD:6 x 6 SoM LSHM B2B Connectors

6 x 6 modules use two or three Samtec Micro Tiger Eye Connector on the bottom side.

  • 3 x REF-189018-01 (compatible to TEM-140-02-03.0-H-D-A), (80 pins, "40" per row)

Absolute Maximum Ratings

Scroll Title
anchorTable_TS_AMR
titleModule absolute maximum ratings.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

ParameterMinMaxUnitsNote
VIN supply voltage55V

Refer to the TE0728 module

Storage Temperature-25+85°C


Recommended Operating Conditions

Operating temperature range depends also on customer design and cooling solution. Please contact us for options.

Scroll Title
anchorTable_TS_ROC
titleRecommended operating conditions.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

ParameterMinMaxUnitsNote
VIN supply voltage55V
Operating Temperature-25+85°C


Physical Dimensions

  • Module size: 100 mm × 107.7 mm.  Please download the assembly diagram for exact numbers.

  • Mating height with standard connectors: 7 mm.

  • PCB thickness: 1.6 mm.

Scroll Title
anchorFigure_TS_PD
titlePhysical Dimension


Scroll Ignore

draw.io Diagram
bordertrue
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision8
diagramNameFigure_TS_PD
simpleViewerfalse
width
linksauto
tbstylehidden
diagramWidth656



Scroll Only
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue


Currently Offered Variants

Page properties
hiddentrue
idComments


Scroll Title
anchorTable_VCP_SO
titleTrenz Electronic Shop Overview

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Trenz shop TEB0728 overview page
English pageGerman page


Revision History

Hardware Revision History

Scroll Title
anchorTable_RH_HRH
titleHardware Revision History

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DateRevisionChanges

01-

02
  • changed value R1
  • changed magjack connectors J7, J8
  • changed 2.1mm power jack THT on SMD
  • magjack connectors: pin8 connected to frame (shassis ground)
  • lib component update
  • added thermal bias to mounting holes
  • added visual serial number
  • changed 2.1mm power jack THT on SMD
  • added 2 x 10uF to VIN



Hardware revision number is printed on the PCB board next to the module model number separated by the dash.

Document Change History

Page properties
hiddentrue
idComments
  • Note this list must be only updated, if the document is online on public doc!
  • It's semi automatically, so do following
    • Add new row below first

    • Copy "Page Information Macro(date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer PDF export template

    • Metadata is only used of compatibility of older exports


Scroll Title
anchorTable_RH_DCH
titleDocument change history.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DateRevisionContributorDescription

Page info
infoTypeModified date
dateFormatyyyy-MM-dd
typeFlat

Page info
infoTypeCurrent version
prefixv.
typeFlat
showVersionsfalse


Page info
infoTypeModified by
typeFlat
showVersionsfalse

  • change list

--

all

Page info
infoTypeModified users
typeFlat
showVersionsfalse

  • --


Disclaimer

Include Page
IN:Legal Notices
IN:Legal Notices