Versions Compared

Old Version 6

changes.mady.by.user Pedram Babakhani

Saved on

compared with

New Version Current

changes.mady.by.user Antti Lukats

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Page properties
hiddentrue
idComments

Note for Download Link of the Scroll ignore macro:


Scroll Ignore

Download PDF version of this document.


Scroll pdf ignore

Table of Contents

Table of Contents

...

The Trenz Electronic TEI0016 is an a commercial-grade module based on Intel® MAX 10. Intel MAX 10 devices are the ideal solution for system management, I/O expansion, communication control planes, industrial, automotive, and consumer applications.

Refer to http://trenz.org/tei0016-info for the current online version of this manual and other available documentation.

...

Page properties
hiddentrue
idComments

Note:
Use 'Key Features' description in shoping page, for example: https://shop.trenz-electronic.de/de/TE0728-04-1Q-SoC-Micromodul-mit-Xilinx-Automotive-Zynq-7020-512-MByte-DDR3L-6-x-6-cm

  • Intel® MAX 10 Commercial [10M08SAU169C8G]

    • Package: UBGA-169

      -UBGA

    • Speed Grade: C8 (Slowest)

    • Temperature:

       0°C ~ 85°C

       0°C to 85°C

    • Package compatible device 10M08...10M16 as assembly variant on request possible

  • SDRAM Memory up to

    64Mb, 166MHz

    32 Mbyte (8Mbyte default)

  • USB 2.0

    Dual High Speed USB to

    Multipurpose UART/FIFO IC

  • Quad SPI Flash, 64Mb
  • EEPROM Memory, 4Kb

  • 8x User LED 

  • USB port

  • (FT2232H)

    • 4 Kbit EEPROM Memory for FTDI configuration data
    • Micro USB Receptacle (communication and power)

  • SPI Flash - NOT INSTALLED (only special option)

  • 8x User LED 

  • Micro USB Connector

  • 16 Bit Analog to Digital Converter with 1 MSPS or 500 kSPS18 Bit Analog to Digital Converter

  • 2x SMA Female Connector

  • I/O interface: 23x GPIO

  • Power Supply: 5V (from USB)

  • Dimension: 25 mm x 86.5 mm

  • Others:

    Others:

    Dimension: 86m x 25m

    • Instrumentation AmplifierVoltage Feedback

    • Differential Amplifier

    • Operational Amplifier

Block Diagram

Page properties
hiddentrue
idComments

add drawIO object here.

Note

For more information regarding how to draw a diagram, Please refer to "Diagram Drawing Guidline" .


...

Scroll Title
anchorFigure_OV_BD
titleTExxxx TEI0016 block diagram


Scroll Ignore

draw.io Diagram
bordertruefalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision13
diagramNameTEI0016_OV_BD
simpleViewerfalse
width
diagramWidthlinksauto
tbstylehidden
diagramWidth641641revision1


Scroll Only


Main Components

...

Scroll Title
anchorFigure_OV_BD
titleTExxxx TEI0016 main components


Scroll Ignore

draw.io Diagram
bordertruefalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision15
diagramNameTEI0016_OV_MC
simpleViewerfalse
width
linksauto
diagramWidthtbstyle639hidden
revisiondiagramWidth2641


Scroll Only

Image Modified


  1. SMA Connector, J5...
  2. ...
  3. ...

Initial Delivery State

Page properties
hiddentrue
idComments

Notes :

Only components like EEPROM, QSPI flash and DDR3 can be initialized by default at manufacture.

If there is no components which might have initial data ( possible on carrier) you must keep the table empty

...

anchorTable_OV_IDS
titleInitial delivery state of programmable devices on the module

...

Storage device name

...

Content

...

Notes

  1. 6
  2. Amplifier, U12
  3. Analog to Digital Converter, U6
  4. Voltage Reference, U8
  5. Voltage Regulator, U10 - U13 - U16
  6. Switching Voltage Regulator/LDO, U11 - U4
  7. SDRAM Memory, U2
  8. Intel® MAX 10 FPGA, U1
  9. SPI Flash Memory, U5 (not populated)
  10. 12.00 MHz MEMS oscillator, U7
  11. FTDI USB to JTAG/UART/FIFO, U3
  12. User LEDs, D2...9
  13. 4Kb EEPROM, U9
  14. Configuration LED (Red) , D10
  15. Power-on LED (Green), D1
  16. Push button, S1...2
  17. Micro USB Connector, J9
  18. 1x14 pin header, J2 (Not assembled)
  19. 1x6 pin header, J4 (Not assembled)
  20. Jumper, J3
  21. 1x14 pin header, J1 (Not assembled)

Initial Delivery State

Page properties
hiddentrue
idComments

Notes :

Only components like EEPROM, QSPI flash and DDR3 can be initialized by default at manufacture.

If there is no components which might have initial data ( possible on carrier) you must keep the table empty

...

Quad SPI Flash

...

Configuration Signals

Page properties
hiddentrue
idComments
Overview of Boot Mode, Reset, Enables.


Scroll Title
anchorTable_OV_BPIDS
titleBoot process.Initial delivery state of programmable devices on the module

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

MODE Signal State

Boot Mode
Scroll Title
anchorTable_OV_RST
titleReset process.
Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
stylewidths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Signal

B2BI/ONote

...

Storage device name

Content

Notes

Quad SPI Flash

N/A

Not populated

EEPROMProgrammed

FTDI configuration


Configuration Signals

Page properties
hiddentrue
idComments

Notes :

  • For carrier or stand-alone boards use subsection for every connector type (add designator on description, not on the subsection title), for example:
    • SD
    • USB
    • ETH
    • FMC
    • ...
  • For modules which needs carrier use only classes and refer to B2B connector if more than one is used, for example
    • JTAG
    • UART
    • I2C
    • MGT
    • ...

Board to Board (B2B) I/Os

FPGA bank number and number of I/O signals connected to the B2B connector:

...

anchorTable_SIP_B2B
titleGeneral PL I/O to B2B connectors information

...

  • Overview of Boot Mode, Reset, Enables.

The FPGA configuration for Intel MAX 10 FPGAs can be stored through JTAG interface (using a *.POF file) on the FPGA itself since the Intel MAX 10 FPGA offers non-volatile configuration memory on chip. The FPGA configuration is loaded from the non-volatile memory when the board is powered up. To configure the FPGA directly, the JTAG interface can be used to configure the FPGA volatile (using a *.SOF file), means the configuration is lost after power off.

FPGA Reconfigration can be triggered by pressing push button S1.

Scroll Title
anchorTable_OV_RST
titleReset process.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Signal

Push ButtonPin HeaderNote

RESET

S1J2Connected to nCONFIG


Signals, Interfaces and Pins

Page properties
hiddentrue
idComments

Notes :

  • For carrier or stand-alone boards use subsection for every connector type (add designator on description, not on the subsection title), for example:
    • SD
    • USB
    • ETH
    • FMC
    • ...
  • For modules which needs carrier use only classes and refer to B2B connector if more than one is used, for example
    • JTAG
    • UART
    • I2C
    • MGT
    • ...

I/Os on Pin Headers and Connectors

Scroll Title
anchorTable_SIP_JTGGIOs
titleJTAG pins connectionGeneral I/Os to Pin Headers and connectors information

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

JTAG Signal

B2B Connector

TMSTDITDOTCKJTAG_EN

MIO Pins

FPGA BankConnector DesignatorI/O Signal CountVoltage LevelNotes
Bank 1AJ173.3VAIN0...6
Bank 1BJ453.3VJTAG interface
Bank 2J143.3VDIO2...5
Bank 5J293.3VDIO6...14
J123.3VDIO0...1
Bank 8J213.3VRESET


FPGA I/O Banks

Page properties
hiddentrue
idComments
Page properties
hiddentrue
idComments

you must fill the table below with group of MIOs which are connected to a specific components or peripherals, you do not have to specify pins in B2B, Just mention which B2B is connected to MIOs. The rest is clear in the Schematic.

Example:

MIO PinConnected toB2BNotes
MIO12...14

SPI_CS , SPI_DQ0... SPI_DQ3

SPI_SCK

J2QSPI


...

Scroll Title
anchorTable_OBP_MIOsIOs
titleMIOs pinsFPGA I/O Banks

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

FPGA BankI/O Signal Count
MIO Pin
Connected to
B2BNotes

...

Page properties
hiddentrue
idComments

Notes :

  • add subsection for every component which is important for design, for example:
    • Two 100 Mbit Ethernet Transciever PHY
    • USB PHY
    • Programmable Clock Generator
    • Oscillators
    • eMMCs
    • RTC
    • FTDI
    • ...
    • DIP-Switches
    • Buttons
    • LEDs
Page properties
hiddentrue
idComments

Notes :

In the on-board peripheral table "chip/Interface" must be linked to the corresponding chapter or subsection

...

anchorTable_OBP
titleOn board peripherals

...

Quad SPI Flash Memory

Page properties
hiddentrue
idComments

Notes :

Minimum and Maximum density of quad SPI flash must be mentioned for other assembly options.

...

anchorTable_OBP_SPI
titleQuad SPI interface MIOs and pins
Notes
Bank 1A71x14 Pin header, J1AIN0...6
1Jumper, J3AIN7
Bank 1B51x6 Pin header, J4JTAG_EN, TDI, TDO, TMS, TCK
Bank 2


41x14 Pin header, J1D2...5
5ADC, U15ADC_EN, ADC_SDI, ADC_SDO, ADC_SCK, ADC_CNV
112MHz Oscillator, U7CLK12M
2Amplifier, U12nIAMP_A0, nIAMP_A1
Bank 322SDRAM, U2RAM_ADDR_CMD
Bank 59

1x14 Pin header, J2

DIO6...14
21x14 Pin header, J1DIO0...1
1D12_RDIO12
Bank 616SDRAM, U2DQ0...15
2SDRAM, U2DQM0...1
1D11_RDIO11
Bank 8



8User Red LEDs, D2...9LED0...7
6SPI Flash, U5F_CS, F_CLK, F_DI, F_DO, nSTATUS, DEVCLRn
1Red LED, D10CONF_DONE
6FTDI JTAG/UART Adapter, U3BDBUS0...5
1Push Button, S2USER_BTN


Micro-USB Connector

The Micro-USB2 connector J9 provides an interface to access the UART and JTAG functions via FTDI FT2232 chip. The use of this feature requires that USB driver is installed on your host PC.

...

Notes

Scroll Title
anchorTable_OBP_RTCUSB
titleI2C interface MIOs and Micro USB-2 connector pins

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

MIO PinSchematicU? Pin

PinsConnected toNote
VBUSUSB_VBUS
D+FTDI U3, DP pin
D-FTDI U3, DM pin


JTAG Interface

JTAG access to the TEI0016 SoM through pin header connector J4.

Scroll Title
anchorTable_OBPSIP_I2C_RTCJTG
titleI2C Address for RTCJTAG pins connection

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

MIO PinI2C AddressDesignatorNotes

...

anchorTable_OBP_EEP
titleI2C EEPROM interface MIOs and pins

JTAG Signal

Pin Header Connector

Note
TMSJ4-6
TDIJ4-5
TDOJ4-4
TCK

J4-3


JTAG_ENJ4-2Pulled-up to 3.3V.


On-board Peripherals

Page properties
hiddentrue
idComments

Notes :

  • add subsection for every component which is important for design, for example:
    • Two 100 Mbit Ethernet Transciever PHY
    • USB PHY
    • Programmable Clock Generator
    • Oscillators
    • eMMCs
    • RTC
    • FTDI
    • ...
    • DIP-Switches
    • Buttons
    • LEDs


Page properties
hiddentrue
idComments

Notes :

In the on-board peripheral table "chip/Interface" must be linked to the corresponding chapter or subsection

...

anchorTable_OBP_I2C_EEPROM
titleI2C address for EEPROM

...


Scroll Title
anchorTable_OBP_LED
titleOn - board LEDsperipherals

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Schematic
Chip/Interface
Color
Designator
Connected to
Notes
Active Level
77530151
Note
U2

...


FTDI FT2232H
Page properties
hiddentrue
idComments

Notes :

Minimum and Maximum density of DDR3 SDRAM must be mentioned for other assembly options. (pay attention to supported address length for DDR3)

The TE???? SoM has ??? GByte volatile DDR3 SDRAM IC for storing user application code and data.

  • Part number: 
  • Supply voltage:
  • Speed: 
  • NOR Flash
  • Temperature: 

Ethernet

...

anchorTable_OBP_ETH
titleEthernet PHY to Zynq SoC connections

...

U3JTAG/UART/FIFO
77530151U5
77530151U9
OscillatorU712 MHz clock source
77530151U6Analog to Digital Converter
8x User LEDsD2...9Red LEDs
Push ButtonsS1...2


SDRAM

TEI0016 is equipped with a Winbond 64 MBit (8 MByte) SDRAM chip in standard configuration, variants with 256 Mbit (32 MByte) memory density are also available. The SDRAM chip is connected to the FPGA bank 3 and 6 via 16-bit memory interface.

Page properties
hiddentrue
idComments

Notes :

Minimum and Maximum density of quad SPI flash must be mentioned for other assembly options.


Scroll Title
anchorTable_OBP_CANSDRAM
titleCAN Tranciever interface MIOsSDRAM interface IOs and pins

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Bank
SDRAM I/O Signals

Signal Schematic

U?? Pin

Name

Connected toNotes
D-TxDriver InputR-RxReciever Output

...

anchorTable_OBP_CLK
titleOsillators

...

Power and Power-On Sequence

...

hiddentrue
idComments

In 'Power and Power-on Sequence' section there are three important digrams which must be drawn:

  • Power on-sequence
  • Power distribution
  • Voltage monitoring circuit
Note

For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .

Address inputs

A0 ... A13

bank 3-
Bank address inputs

BA0 / BA1

bank 3

-
Data input/output

DQ0 ... DQ15

bank 6

-
Data mask

DQM0 ... DQM1

bank 6

-
ClockCLKbank 3-
Control Signals

CS

bank 3

Chip select

CKE

bank 3

Clock enable

RAS

bank 3

Row Address Strobe

CAS

bank 3

Column Address Strobe

WEbank 3Write Enable


FTDI FT2232H

The FTDI chip U3 converts signals from USB to a variety of standard serial and parallel interfaces. Refer to the FTDI data sheet to get information about the features of the FT2232H chip. FTDI FT2232H chip channel A is used in MPPSE mode for JTAG. Channel B is configured to be used as in async FIFO mode, this is default mode when using preprogrammed FTDI configuration. In this mode the communication from host PC looks like normal UART but from the FTDI side it is 8 bit FIFO style interface.

The configuration of FTDI FT2232H chip is pre-programmed on the EEPROM U9.

Scroll Title
anchorTable_OBP_FTDI
titleFTDI chip interfaces and pins

Power Supply

Power supply with minimum current capability of xx A for system startup is recommended.

Power Consumption

Scroll Title
anchorTable_PWR_PC
titlePower Consumption

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Power Input
FTDI Chip U3 Pin
Typical Current
VINTBD*

* TBD - To Be Determined

Power Distribution Dependencies

...

anchorFigure_PWR_PD
titlePower Distribution
Scroll Ignore

Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only

image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

Signal Schematic NameConnected toNotes
ADBUS0TCKFPGA bank 1B, pin G2JTAG interface
ADBUS1TDIFPGA bank 1B, pin F5
ADBUS2TDOFPGA bank 1B, pin F6
ADBUS3TMS

FPGA bank 1B, pin G1

BDBUS0BDBUS0FPGA bank 8, pin A4User configurable
BDBUS1BDBUS1FPGA bank 8, pin B4User configurable
BDBUS2BDBUS2FPGA bank 8, pin B5User configurable
BDBUS3BDBUS3FPGA bank 8, pin A6User configurable
BDBUS4BDBUS4FPGA bank 8, pin B6User configurable
BDBUS5BDBUS5FPGA bank 8, pin A7User configurable
BDBUS6BDBUS6FPGA bank 6, pin C11
BDBUS7BDBUS7FPGA bank 3, pin J7
BCBUS0BCBUS0FPGA bank 5, pin J9
BCBUS1BCBUS1FPGA bank 3, pin K5
BCBUS2BCBUS2FPGA bank 3, pin K5
BCBUS3BCBUS3FPGA bank 3, pin K5
BCBUS4BCBUS4FPGA bank 3, pin K5


SPI Flash

Optional SPI flash device maybe assembled in custom variants, normally it is not populated.

Power-On Sequence

...

anchorFigure_PWR_PS
titlePower Sequency
Scroll Ignore

Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only

image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

Voltage Monitor Circuit

...

anchorFigure_PWR_VMC
titleVoltage Monitor Circuit
Scroll Ignore

Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only

image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

Power Rails

...

anchorTable_PWR_PR
titleModule power rails.

...

B2B Connector

JM1 Pin

...

B2B Connector

JM2 Pin

...

B2B Connector

JM3 Pin

...

Bank Voltages

Scroll Title
anchorTable_PWROBP_BVQSPI
titleZynq SoC bank voltages.Quad SPI Flash memory interface

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Bank          

Signal Schematic Name
Voltage
Connected toNotes

...

hiddentrue
idComments

...

F_CSFPGA bank 8, pin B3Chip select
F_CLKFPGA bank 8, pin A3Clock
F_DIFPGA bank 8, pin A2Data in / out
nSTATUS

FPGA bank 8, pin C4

Data in / out, configuration dual-purpose pin of FPGA
DEVCLRNFPGA bank 8, pin B9Data in / out, configuration dual-purpose pin of FPGA
F_DOFPGA bank 8, pin B2Data in / out


EEPROM

The configuration of FTDI FT2232H chip is pre-programmed in the EEPROM U9.

use "include page" macro and link to the general B2B connector page of the module series,

...

? x ? modules use two or three Samtec Micro Tiger Eye Connector on the bottom side.

  • 3 x REF-??????? (compatible to ????????), (?? pins, ?? per row)

    Operating Temperature: -??°C ~ ??°C
    Current Rating: ??A per ContactNumber of Positions: ??
    Number of Rows: ??

Technical Specifications

...

Scroll Title
anchorTable_TSOBP_AMREEP
titlePS absolute maximum ratingsI2C EEPROM interface MIOs and pins

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Symbols
Schematic
Description
Connected to
Min
Notes
MaxUnitVVVVVVVV

Recommended Operating Conditions

Operating temperature range depends also on customer design and cooling solution. Please contact us for options.

...

anchorTable_TS_ROC
titleRecommended operating conditions.

...

Physical Dimensions

  • Module size: ?? mm × ?? mm.  Please download the assembly diagram for exact numbers.

  • Mating height with standard connectors: ? mm.

PCB thickness: ?? mm.

...

hiddentrue
idComments

In 'Physical Dimension' section, top and button view of moduloe must be insterted, information regarding physical dimention can be obtained through webpage for product in Shop.Trenz, (Download> Documents> Assembly part)for every SoM.

For Example: for Module TE0728, Physical Dimension information can be captured by snipping tools from the link below:

https://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/Modules_and_Module_Carriers/5.2x7.6/TE0745/REV02/Documents/AD-TE0745-02-30-1I.PDF

Note

For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .

EECS

FTDI U3, Pin EECS
EECLKFTDI U3, Pin EECLK
EEDATAFTDI U3, Pin EEDATA


ADC

The boards with article nuber - TEI0016-03-08-C8A - are equipped with the Analog DevicesADC - ADAQ7988BCCZ - 16-bit 500kSPS,
boards wit article number TEI0016-03-08-C8B are equipped with the Analog Devices ADC - ADAQ7980BCCZ - 16-bit 1MSPS.

The ADC can be distinguished via its part code:

  • TEI0016-03-08-C8A: ADAQ7988BCCZ - 16-bit 500kSPS - starts with Y6H
  • TEI0016-03-08-C8B: ADAQ7980BCCZ - 16-bit 1.0MSPS - starts with Y6F
Scroll Title
anchorFigure_OV_BD
titleTEI0016 part code variants


Scroll Ignore

draw.io Diagram
bordertrue
viewerToolbartrue
fitWindowfalse
diagramNameTEI0016_part-code-variants
simpleViewerfalse
width600
diagramWidth1922
revision1


Scroll Only

Image Added



Scroll Title
anchorTable_OBP_ADC
titleADC converter interface and pins

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

PinsConnected toNotes

IN+

U8, VOUT
IN-U12, VOUT
SDIBank 2, ADC_SDI
SDOBank 2, ADC_SDO
SCKBank 2, ADC_SCK
CNVBank 2, ADC_CNV


LEDs

Scroll Title
anchorTable_OBP_LED
titleOn-board LEDs

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DesignatorColorConnected toActive LevelNote
D2...9RedLED1...8Active HighUser LEDs
D10RedCONF_DONEActive LowConfiguration DONE LED
D1Green3.3V Power RailActive HighAfter power on it will be on.


Push Buttons

Scroll Title
anchorTable_OBP_LED
titleOn-board Push Buttons

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DesignatorConnected toFunctionalityNote
S1RESETGeneral reset
S2USER_BTNUser push buttonConnected to FPGA Bank 8.


Clock Sources

Scroll Title
anchorTable_OBP_CLK
titleOsillators

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Clock SourceSchematic NameFrequencyNote
MEMS Oscillator, U7CLK12M12.00 MHz

Connected to FTDI FT2232 U3, pin 3.

Connected to FPGA bank 2, pin H6.


Power and Power-On Sequence

Page properties
hiddentrue
idComments

In 'Power and Power-on Sequence' section there are three important digrams which must be drawn:

  • Power on-sequence
  • Power distribution
  • Voltage monitoring circuit


Note

For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .


Power Supply

The module is supplied from USB (optionally via unpopulated pin header).

Power Consumption

Scroll Title
anchorTable_PWR_PC
titlePower Consumption

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

FPGATypical Current
Intel MAX 10 10M08 FPGATBD*


* TBD - To Be Determined

Power Distribution Dependencies

Scroll Title
anchorFigure_PWR_PD
titlePower Distribution


Scroll Ignore

draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision4
diagramNameTEI0016_PWR_PD
simpleViewerfalse
width
linksauto
tbstylehidden
diagramWidth545



Scroll Only

Image Added


Power-On Sequence

There is no specific or special power-on sequence, just one single power source is needed. After power on, the green LED (D1) will be on.

Power Rails

Scroll Title
anchorTable_PWR_PR
titleModule power rails.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue


Power Rail Name

Connector

J2 Pin

Connector

J9 Pin

DirectionNotes
VINJ2-13-Input5 V - Pin Header
3.3VJ2-12-Output
5VJ2-14-Output

USB_VBUS

-J9-1Input5 V - USB Connector


Bank Voltages

Scroll Title
anchorTable_PWR_BV
titleIntel Max 10 SoC bank voltages.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Bank          

Schematic Name

Voltage

Notes
Bank 1AVCCIO1A3.3V
Bank 1B

VCCIO1B

3.3V
Bank 2VCCIO23.3V
Bank 3VCCIO33.3V
Bank 5VCCIO53.3V
Bank 6VCCIO63.3V


Bank 8VCCIO83.3V



Technical Specifications

Absolute Maximum Ratings

Scroll Title
anchorTable_TS_AMR
titleAbsolute maximum ratings

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

SymbolsDescriptionMinMaxUnitReference Document

VIN 

Supply voltage4.755.25V
CH1-, CH1+Analog input voltage on amplifier U12 pin 1, 10-3030VAD8251 datasheet

T_STG

Storage Temperature-40+85°C



Recommended Operating Conditions

Operating temperature range depends also on customer design and cooling solution. Please contact us for options.

Scroll Title
anchorTable_TS_ROC
titleRecommended operating conditions.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

SymbolsMinMaxUnitReference Document
VIN supply voltage (5.0V nominal)4.755.25V
Analog input voltage on amplifier U12 pin 1 (CH1-), 10 (CH1+)-1010V
T_OP0+70°CW9864G6JT-6 datasheet


Physical Dimensions

Module size: 86.5 mm × 25 mm.  Please download the assembly diagram for exact numbers.

PCB thickness: 1.22 mm.

Page properties
hiddentrue
idComments

In 'Physical Dimension' section, top and button view of moduloe must be insterted, information regarding physical dimention can be obtained through webpage for product in Shop.Trenz, (Download> Documents> Assembly part)for every SoM.

For Example: for Module TE0728, Physical Dimension information can be captured by snipping tools from the link below:

https://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/Modules_and_Module_Carriers/5.2x7.6/TE0745/REV02/Documents/AD-TE0745-02-30-1I.PDF

Note

For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .



Scroll Title
anchorFigure_TS_PD
titlePhysical Dimension


Scroll Ignore

draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision2
diagramNameTEI0016_TE_PD
simpleViewerfalse
width
linksauto
tbstylehidden
diagramWidth641


Scroll Only
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue

Image Added


Currently Offered Variants 

Page properties
hiddentrue
idComments

Set correct link to the shop page overview table of the product on English and German.

Example for TE0728:

ENG Page: https://shop.trenz-electronic.de/en/Products/Trenz-Electronic/TE07XX-Zynq-SoC/TE0728-Zynq-SoC/

DEU Page: https://shop.trenz-electronic.de/de/Produkte/Trenz-Electronic/TE07XX-Zynq-SoC/TE0728-Zynq-SoC/

if not available, set.


Scroll Title
anchorTable_VCP_SO
titleTrenz Electronic Shop Overview

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Trenz shop TEI0016 overview page
English pageGerman page


Revision History

Hardware Revision History

Scroll Title
anchorTable_RH_HRH
titleHardware Revision History

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DateRevisionChangesDocumentation Link
2019-02-1101-REV01


Hardware revision number can be found on the PCB board together with the module model number separated by the dash.

Scroll Title
anchorFigure_RV_HRN
titleBoard hardware revision number.


Scroll Ignore

draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision1
diagramNameTEI0016_RV_HRN
simpleViewerfalse
width
linksauto
tbstylehidden
diagramWidth154


Scroll Only
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue

Image Added


...

anchorFigure_TS_PD
titlePhysical Dimension
Scroll Ignore

Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue

image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

Currently Offered Variants 

Page properties
hiddentrue
idComments

Set correct link to the shop page overview table of the product on English and German.

Example for TE0728:

ENG Page: https://shop.trenz-electronic.de/en/Products/Trenz-Electronic/TE07XX-Zynq-SoC/TE0728-Zynq-SoC/

DEU Page: https://shop.trenz-electronic.de/de/Produkte/Trenz-Electronic/TE07XX-Zynq-SoC/TE0728-Zynq-SoC/

if not available, set.

...

anchorTable_VCP_SO
titleTrenz Electronic Shop Overview

...

Revision History

Hardware Revision History

List of online PCN ...Link

...

anchorTable_RH_HRH
titleHardware Revision History

...

Document Change History

Page properties
hiddentrue
idComments
  • Note this list must be only updated, if the document is online on public doc!
  • It's semi automatically, so do following

    • Add new row below first

    • Copy "Page Information Macro(date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template

    • Metadata is only used of compatibility of older exports

...

Scroll Title
anchorTable_RH_DCH
titleDocument change history.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DateRevisionContributorDescription

Page info
infoTypeModified date
dateFormatyyyy-MM-dd
typeFlat

Page info
infoTypeCurrent version
prefixv.
typeFlat
showVersionsfalse

Page info
infoTypeModified by
typeFlat
showVersionsfalse

change list

  • major cleanup multiply sections

2019-09-20

v.56Kilian Jahn
  • update notes for variants
2019-06-05v.55ED

  • Technical Specifications updated

  • Power Rails updated

--

all

Page info
infoTypeModified users
typeFlat
showVersionsfalse

  • --


...