Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Page properties
hiddentrue
idComments

Template Revision 2.6

  • Module: TRM Name always "TE Series Name" +TRM
    Example: "TE0728 TRM"
  • Carrier: TRM Name usually "TEB Series Name" +TRM
    Example: "TEB0728 TRM"

...

Page properties
hiddentrue
idComments

Important General Note:

  • If some section is configurable and depends on Firmware, please refer to the addition page (for example CPLD). If not available, add note, that this part is configurable
  • Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro

    • Use "Scroll Title" macro for pictures and table labels. Figure number must be set manually at the moment (automatically enumeration is planned by scrollPDF)
      • Figure template:

        Scroll Title
        anchorFigure_anchorname
        titleText


        Scroll Ignore

        Create DrawIO object here: Attention if you copy from other page, objects are only linked.


        Scroll Only

        image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed



      • Table template:

        • Layout macro can be use for landscape of large tables

      • Scroll Title
        anchorTable_tablename
        titleText

        Scroll Table Layout
        orientationportrait
        sortDirectionASC
        repeatTableHeadersdefaultstyle
        widthssortByColumn1
        sortEnabledfalse
        cellHighlightingtrue

        ExampleComment
        12



    • The anchors of the Scroll Title should be named consistant across TRMs. A incomplete list of examples is given below

      • <type>_<main section>_<name>

        • type: Figure, Table
        • main section:
          • "OV" for Overview
          • "SIP" for Signal Interfaces and Pins,
          • "OBP" for On board Peripherals,
          • "PWR" for Power and Power-On Sequence,
          • "B2B" for Board to Board Connector,
          • "TS" for Technical Specification
          • "VCP" for Variants Currently in Production
          •  "RH" for Revision History
        • name: custom, some fix names, see below
      • Fix names:
        • "Figure_OV_BD" for Block Diagram

        • "Figure_OV_MC" for Main Components

        • "Table_OV_IDS" for Initial Delivery State

        • "Table_PWR_PC" for Power Consumption

        • "Figure_PWR_PD" for Power Distribution
        • "Figure_PWR_PS" for Power Sequence
        • "Figure_PWR_PM" for Power Monitoring
        • "Table_PWR_PR" for Power Rails
        • "Table_PWR_BV" for Bank Voltages
        • "Table_TS_AMR" for Absolute_Maximum_Ratings

        • "Table_TS_ROC" for Recommended_Operating_Conditions

        • "Figure_TS_PD" for Physical_Dimensions
        • "Table_VCP_SO" for TE_Shop_Overview
        • "Table_RH_HRH" for Hardware_Revision_History

        • "Figure_RH_HRN" for Hardware_Revision_Number
        • "Table_RH_DCH" for Document_Change_History
    • Use Anchor in the document: add link macro and add "#<anchorname>
    • Refer to Anchror from external : <page url>#<pagename without space characters>-<anchorname>


...

Page properties
hiddentrue
idComments

Note for Download Link of the Scroll ignore macro:


Scroll Ignore

Download PDF version of this document.


Scroll pdf ignore

Table of Contents

Table of Contents

...

The Trenz Electronic TEI0015 is an a commercial-grade, low cost and small size module integrated with Intel® MAX 10.  Intel MAX 10 devices are the ideal solution for system management, I/O expansion, communication control planes, industrial, automotive, and consumer applications.

Refer to http://trenz.org/tei0015-info for the current online version of this manual and other available documentation.

Page properties
hiddentrue
idComments

Notes :

...

Page properties
hiddentrue
idComments

Note:
Use 'Key Features' description in shoping page, for example: https://shop.trenz-electronic.de/de/TE0728-04-1Q-SoC-Micromodul-mit-Xilinx-Automotive-Zynq-7020-512-MByte-DDR3L-6-x-6-cm

  • Intel® MAX 10 Commercial [10M08SAU169C8G]

    • Package: UBGA-169

      -UBGA

    • Speed Grade: C8 (Slowest)

    • Temperature:

       0°C ~ 85°C

       0°C to 85°C

    • Package compatible device 10M08...10M16 as assembly variant on request possible

  • SDRAM Memory up to

    64Mb, 166MHzDual High Speed USB to

    32 Mbyte (8Mbyte default)

  • USB 2.0 Multipurpose UART/FIFO IC

  • Quad SPI Flash, 64Mb
  • EEPROM Memory, 4Kb
  • 8x User LED 

  • USB port

  • 18 Bit

    (FT2232H)

    • 4 Kbit EEPROM Memory for FTDI configuration data
    • Micro USB Receptacle (communication and power)
  • SPI Flash - NOT INSTALLED (only special option)

  • 8x User LED 
  • 18 Bit 2MSPS Analog to Digital Converter
  • 2x SMA Female Connector

  • I/O interface: 23x GPIO - Arduino MKR compatible

  • Power Supply:

    5V

    Others
  • Dimension: 86.5mm x 25mm

    Dimension
  • Others:

  • 86m x 25m
    • Instrumentation Amplifier

  • Voltage Feedback
    • Differential Amplifier

    • Operational Amplifier

Block Diagram

Page properties
hiddentrue
idComments

add drawIO object here.

Note

For more information regarding how to draw a diagram, Please refer to "Diagram Drawing Guidline" .


...

Scroll Title
anchorFigure_OV_BD
titleTEI0015 block diagram


11
Scroll Ignore
draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision
diagramNameTEI0015_OV_BD
simpleViewerfalse
width
linksauto
tbstylehidden
lboxtrue
diagramWidth642
revision
641
27


Scroll Only


Main Components

...

Scroll Title
anchorFigure_OV_BD
titleTEI0015 main components


Scroll Ignore

draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalsediagramDisplayName
lboxtrue
revision6
diagramNameTEI0015_OV_MC
simpleViewerfalse
widthlinksauto
tbstylehidden
lboxtrue
diagramWidth641
revision14


Scroll Only


  1. SMA Connector, J5...6

  2. Instrumentation

    Amplifier, U12 - U14 - U6

  3. Series

    Voltage Reference, U8

  4. Analog to Digital

    Convertor

    Converter, U15

    - U6

  5. Voltage Regulator, U10 - U13 - U16

  6. Buck

    Switching Voltage Regulator/LDO, U11 - U4

  7. SDRAM Memory, U2

  8. Intel® MAX 10 FPGA, U1SDRAM Memory, U2
  9. SPI Flash Memory, U5

    USP to UART convertor
  10. 12.00 MHz MEMS oscillator, U7

  11. FTDI USB2 to JTAG/UART adapter, U3

  12. User LEDs, D2...9

  13. 4Kb

    FTDI configuration EEPROM, U9

    Switch
  14. Configuration/Status LED (Red) , D10

  15. Power-on LED (Green), D1

  16. Push button, S1...2

  17. Micro USB

    port

    Connector, J9

  18. Pin Holder

    1x14 pin header, J2 (Not assembled)

  19. 1x6 pin header, J4 (Not assembled)

  20. 1x4 Header, J3 (Not assembled)

  21. 1x14 pin header, J1

    ...4

    (Not assembled)

Initial Delivery State

Page properties
hiddentrue
idComments

Notes :

Only components like EEPROM, QSPI flash and DDR3 can be initialized by default at manufacture.

If there is no components which might have initial data ( possible on carrier) you must keep the table empty

...

Scroll Title
anchorTable_OV_IDS
titleInitial delivery state of programmable devices on the module

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

Not Programmed

Storage device name

Content

Notes

Quad SPI Flash

N/A

Not

Programmed

populated

I2C Configuration EEPROM

Programmed

SDRAM

FTDI configuration


Configuration Signals

Page properties
hiddentrue
idComments
  • Overview of Boot Mode, Reset, Enables.

The FPGA configuration for Intel MAX 10 FPGAs can be stored through JTAG interface either in external configuration device (QSPI flash memory U5) or (using a *.POF file) on the FPGA itself since the Intel MAX 10 FPGA offers non-volatile configuration memory on chip. The FPGA configuration is loaded from the non-volatile memory when the board is powered up. To configure the FPGA directly, the JTAG interface can be used to configure the FPGA volatile , means (using a *.SOF file), means the configuration is lost after power off.

Reset process must be done FPGA Reconfigration can be triggered by pressing push button S1.

Scroll Title
anchorTable_OV_RST
titleReset process.

Scroll Table Layout
widths
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Signal

Push ButtonPin HeaderNote

RESET

S1J2connected Connected to nCONFIG


Signals, Interfaces and Pins

...

Scroll Title
anchorTable_SIP_GIOs
titleGeneral I/Os to Pin Headers and connectors information

Scroll Table Layout
widths
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

FPGA BankConnector DesignatorI/O Signal CountVoltage LevelNotes
Bank 1AJ173.3VAIN0...6
Bank 1BJ453.3VJTAG interface
Bank 2J143.3VDIO2...5
Bank 5J293.3VDIO6...14
J123.3VDIO0...1
Bank 8J213.3VRESET


...

sortDirection
Scroll Title
anchorTable_OBP_IOs
titleFPGA I/O Banks
Scroll Table Layout
orientationportrait


ASC
repeatTableHeadersdefault
stylewidths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue
FPGA BankI/O Signal CountConnected toNotes
Bank 1A71x14 Pin header, J1AIN0...6
1Jumper, J3AIN7
Bank 1B51x6 Pin header, J4JTAG_EN, TDI, TDO, TMS, TCK
Bank 2


41x14 Pin header, J1D2...5
5A2D, U15ADC_EN, ADC_SDI, ADC_SDO, ADC_SCK, ADC_CNV
112MHz Oscillator, U7CLK12M
2Amplifier, U12nIAMP_A0, nIAMP_A1
Bank 322SDRAM, U2RAM_ADDR_CMD
Bank 59

1x14 Pin header, J2

DIO6...14
21x14 Pin header, J1DIO0...1
1D12_RDIO12
Bank 616SDRAM, U2DQ0...15
2SDRAM, U2DQM0...1
1D11_RDIO11
Bank 8



8User Red LEDs, D2...9LED0...7
6SPI Flash, U5F_CS, F_
CK
CKL, F_DI, F_DO, nSTATUS, DEVCLRn
1Red LED, D10CONF_DONE
6FTDI JTAG/UART Adapter, U3BDBUS0...5
1Push Button, S2USER_BTN

JTAG Interface

...


Micro-USB Connector

The Micro-USB connector J9 provides an interface to access the FIFO/UART and JTAG functions via FTDI FT2232 chip. The use of this feature requires that FTDI USB drivers are installed on your host PC.

Pin Header Connector
Scroll Title
anchorTable_SIPOBP_JTGUSB
titleJTAG Micro USB-2 connector pins connection

Scroll Table Layout
style
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

Page properties
hiddentrue
idComments

Notes :

add subsection

JTAG Signal

PinsConnected toNote
TMSJ4-6TDIJ4-5TDOJ4-4TCK

J4-3

JTAG_ENJ4-2

On-board Peripherals

VBUSUSB_VBUS
D+

FTDI FT2232H U3, DP pin


D-

FTDI FT2232H U3, DM pin



JTAG Interface

JTAG access to the TEI0015 SoM through pin header connector J4. This is normally not needed as there is on-board USB JTAG functionality.

Scroll Title
anchorTable_SIP_JTG
titleJTAG pins connection

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

JTAG Signal

Pin Header Connector

Note
TMSJ4-6
TDIJ4-5
TDOJ4-4
TCK

J4-3


JTAG_ENJ4-2Pulled-up to 3.3V


On-board Peripherals

Page properties
hiddentrue
idComments

Notes :

  • add subsection for every component which is important for design, for example:
    • Two 100 Mbit Ethernet Transciever PHY
    • USB PHY
    • Programmable Clock Generator
    • Oscillators
    • eMMCs
    • RTC
    • FTDI
    • ...
    • DIP-Switches
    • Buttons
    • LEDs

...

Scroll Title
anchorTable_OBP
titleOn board peripherals

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
widthssortByColumnsortByColumn1
sortEnabledfalse
cellHighlightingtrue

Chip/InterfaceDesignatorNotes
SDRAM
77530153U2
FTDI FT2232HU3JTAG/UART
Adapter
/FIFO
SPI Flash
Memory
U5
EEPROM

77530153U9
OscillatorU7
12MHz
12 MHz clock source
A2D Convertor
77530153U12, U14Analog to Digital
Convertor
Converter
Push ButtonsS1...2
8x User LEDsD2...9Red LEDs


SDRAM

TEI0015 is equipped with a Winbond 64 MBit (8 MByte) SDRAM chip in standard configuration, variants with 256 Mbit (32 MByte) memory density are also available. The SDRAM chip is connected to the FPGA bank 3 and 6 via 16-bit memory interface with 166MHz clock frequency and CL3 CAS latency.

...

Scroll Title
anchorTable_OBP_SDRAM
titleSDRAM interface IOs and pins

Scroll Table Layout
style
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

SDRAM I/O Signals

Signal Schematic Name

Connected toNotes
Address inputs

A0 ... A13

bank 3-
Bank address inputs

BA0 / BA1

bank 3

-
Data input/output

DQ0 ... DQ15

bank 6

-
Data mask

DQM0 ... DQM1

bank 6

-
ClockCLKbank 3-
Control Signals

CS

bank 3

Chip select

CKE

bank 3

Clock enable

RAS

bank 3

Row Address Strobe

CAS

bank 3

Column Address Strobe

WEbank 3Write Enable


FTDI FT2232H

The FTDI chip U3 converts signals from USB2 to a variety of standard serial and parallel interfaces. Refer to the FTDI data sheet to get information about the capacity features of the FT2232H chip.
FTDI FT2232H chip channel A is used in MPPSE mode for JTAG, 6 I/O's of . Channel B are routed to FPGA bank 8 of the FPGA SoC and are usable for example as GPIOs, UART or other standard interfacesis configured to be used in async FIFO mode, this is default mode when using preprogrammed FTDI configuration. In this mode the communication from host PC looks like normal UART but from the FTDI side it is 8 bit FIFO style interface.

The configuration of FTDI FT2232H chip is pre-programmed on in the EEPROM U9.

Scroll Title
anchorTable_OBP_FTDI
titleFTDI chip interfaces and pins

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

FTDI Chip U3 PinSignal Schematic NameConnected toNotes
ADBUS0TCKFPGA bank 1B, pin G2JTAG interface
ADBUS1TDIFPGA bank 1B, pin F5
ADBUS2TDOFPGA bank 1B, pin F6
ADBUS3TMS

FPGA bank 1B, pin G1

BDBUS0BDBUS0FPGA bank 8, pin A4user User configurable
BDBUS1BDBUS1FPGA bank 8, pin B4user User configurable
BDBUS2BDBUS2FPGA bank 8, pin B5user User configurable
BDBUS3BDBUS3FPGA bank 8, pin A6user User configurable
BDBUS4BDBUS4FPGA bank 8, pin B6user User configurable
BDBUS5BDBUS5FPGA bank 8, pin A7user User configurable

SPI Flash Memory

On-board serial configuration memory (U5) is provided by Winbond with 64 MBit (8 MByte) storage capacity. This non volatile memory is used to store initial FPGA configuration via JTAG interface. The memory is connected to FPGA bank 8 via SPI interface.

...

anchorTable_OBP_QSPI
titleQuad SPI Flash memory interface

...

FPGA bank 8, pin C4

...

EEPROM

...

BDBUS6BDBUS6FPGA bank 6, pin C11
BDBUS7BDBUS7FPGA bank 3, pin J7
BCBUS0BCBUS0FPGA bank 5, pin J9
BCBUS1BCBUS1FPGA bank 3, pin K5
BCBUS2BCBUS2FPGA bank 3, pin L4
BCBUS3BCBUS3FPGA bank 3, pin L5
BCBUS4BCBUS4FPGA bank 3, pin N12


SPI Flash

Optional SPI flash device maybe assembled in custom variants, normally it is not populated.

Scroll Title
anchorTable_OBP_EEPQSPI
titleI2C EEPROM interface MIOs and pinsQuad SPI Flash memory interface

Scroll Table Layout
style
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

Signal Schematic NameConnected toNotes

EECS

FTDI U3, Pin EECSEECLKFTDI U3, Pin EECLKEEDATAFTDI U3, Pin EEDATA

A2D Convertor

...

F_CSFPGA bank 8, pin B3Chip select
F_CLKFPGA bank 8, pin A3Clock
F_DIFPGA bank 8, pin A2Data in / out
nSTATUS

FPGA bank 8, pin C4

Data in / out, configuration dual-purpose pin of FPGA
DEVCLRNFPGA bank 8, pin B9Data in / out, configuration dual-purpose pin of FPGA
F_DOFPGA bank 8, pin B2Data in / out


EEPROM

The configuration of FTDI FT2232H chip is pre-programmed in the EEPROM U9.

On-board LEDs
Scroll Title
anchorTable_OBP_A2DEEP
titleA2D converter I2C EEPROM interface MIOs and pins
Scroll Title
anchorTable_OBP_LED
title

Scroll Table Layout
style
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

PinsSchematicConnected toNotes

IN+

Diff Amplifier U14, VOUT-IN-Diff Amplifier U14, VOUT+SDIBank 2, ADC_SDISDOBank 2, ADC_SDOSCKBank 2, ADC_SCKCNVBank 2, ADC_CNV

LEDs

EECS

FTDI U3, Pin EECS
EECLKFTDI U3, Pin EECLK
EEDATAFTDI U3, Pin EEDATA


ADC

The TEI0015 board is equipped with the Analog Devices AD4003BCPZ-RL7 18-bit 2MSPS ADC.

Micro USB-2 connector pins
Scroll Title
anchorTable_OBP_A2D
titleA2D converter interface and pins
Scroll Title
anchorTable_OBP_USB
title

Scroll Table Layout
widths
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Designator
Pins
Color
Connected to
Active Level
Notes
NoteD2...9RedLED1...8Active HighUser LEDsD10RedCONF_DONEActive LowConfiguration DONE LEDD1Green3.3V Power RailActive HighAfter power on it will be on

Micro-USB2 Connector

The Micro-USB2 connector J9 provides an interface to access the UART and JTAG functions via FTDI FT2232 chip. The use of this feature requires that USB driver is installed on your host PC.

IN+

Diff Amplifier U14, VOUT-
IN-Diff Amplifier U14, VOUT+
SDIFPGA, bank 2, pin M2, ADC_SDI
SDOFPGA, bank 2, pin M1,  ADC_SDO
SCKFPGA, bank 2, pin N3,  ADC_SCK
CNVFPGA, bank 2, pin N2, ADC_CNV


LEDs

Scroll Title
anchorTable_OBP_LED
titleOn-board LEDs

Scroll Table Layout
style
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

Pins
DesignatorColorConnected toActive LevelNote
VBUSUSB_VBUSIt is connected to GND
D+FTDI U3, DP pinD-FTDI U3, DM pin

...

D2...9RedLED1...8Active HighUser LEDs
D10RedCONF_DONEActive LowConfiguration DONE LED
D1Green3.3V Active HighAfter power on it will be on.


Push Bottuns

Frequency
Scroll Title
anchorTable_OBP_CLKLED
titleOsillatorsOn-board Push Buttons

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

Clock SourceSchematic Name
DesignatorConnected toFunctionalityNote
Microchip MEMS Oscillator, U7CLK12M12.00 MHz

Connected to FTDI FT2232 U3, pin 3

Connected to FPGA SoC bank 2, pin H6

Power and Power-On Sequence

...

hiddentrue
idComments

In 'Power and Power-on Sequence' section there are three important digrams which must be drawn:

Note

For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .

Power Supply

To power-up the module, power supply with minimum current capability of 1A is recommended.

Power Consumption

...

anchorTable_PWR_PC
titlePower Consumption

...

* TBD - To Be Determined

...

S1RESETGeneral reset
S2USER_BTNUser push buttonConnected to FPGA Bank 8.


Clock Sources

Scroll Title
anchorTable_OBP_CLK
titleOsillators

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Clock SourceSchematic NameFrequencyNote
MEMS Oscillator, U7CLK12M12.00 MHz

Connected to FTDI FT2232 U3, pin 3.

Connected to FPGA SoC bank 2, pin H6.


Power and Power-On Sequence

Page properties
hiddentrue
idComments

In 'Power and Power-on Sequence' section there are three important digrams which must be drawn:

  • Power on-sequence
  • Power distribution
  • Voltage monitoring circuit


Note

For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .


Power Supply

The module is power supplied from USB (optionally via unpopulated pin header).

Power Consumption

Power SequencyfitWindow

Scroll Title
anchorFigureTable_PWR_PDPC
titlePower DistributionConsumption
Scroll Title
anchorFigure_PWR_PS
title

scroll-

ignore
draw.io Diagram
bordertrue
viewerToolbartrue
tablelayout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse

diagramNameTEI0015_PWR_PDsimpleViewerfalsewidthdiagramWidth641revision1
Scroll Only

image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

Power-On Sequence

cellHighlightingtrue

FPGATypical Current
Intel MAX 10 10M08 FPGATBD*


* TBD - To Be Determined

Actual power consumption depends on the FPGA design and ambient temperature.

Power Distribution Dependencies

Scroll Title
anchorFigure_PWR_PD
titlePower Distribution


Scroll Ignore

draw.io Diagram
bordertruefalse
viewerToolbartrue
fitWindowfalse
diagramNameTEI0015_PWR_PSPD
simpleViewerfalse
widthlinksauto
tbstylehidden
diagramDisplayNameTEI0015_PWR_P
lboxtrue
diagramWidth641638
revision112


Scroll Only

image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

...

Image Added


Power-On Sequence

There is no specific or special power-on sequence, just one single power source is needed. After power on the green LED (D1) will be on.

Power Rails

Scroll Title
anchorFigureTable_PWR_VMCPR
titleVoltage Monitor CircuitModule power rails.
Scroll Title
anchorTable_PWR_PR
titleModule power rails.

scroll-

ignore

Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only

image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

Power Rails

Scroll Table Layout
orientation
tablelayout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue


Power Rail Name
B2B

Connector

JM1

J2 Pin

B2B

Connector

JM2

J9 Pin

B2B Connector

JM3 Pin

DirectionNotes

...

scrolltitle
VIN
J2-
13-Input5 V - Pin Header
3.3VJ2-12-Output
5VJ2-14-Output

USB_VBUS

-J9-1Input5 V - USB Connector


Bank Voltages

Scroll Title
anchorTable_PWR_BV
titleZynq Intel MAX 10 SoC bank voltages.

use "include page" macro and link to the general B2B connector page of the module series,

...

? x ? modules use two or three Samtec Micro Tiger Eye Connector on the bottom side.

Technical Specifications

Absolute Maximum Ratings

Scroll Title
anchor

Scroll Table Layout
widths
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Bank          

Schematic Name

Voltage

Notes

...

hiddentrue
idComments

...

Bank 1AVCCIO1A3.3V
Bank 1B

VCCIO1B

3.3V
Bank 2VCCIO23.3V
Bank 3VCCIO33.3V
Bank 5VCCIO53.3V
Bank 6VCCIO63.3V


Bank 8VCCIO83.3V



Technical Specifications

Absolute Maximum Ratings

V
Scroll Title
anchorTable_TS_AMR
titlePS absolute Absolute maximum ratings

Scroll Table Layout
style
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

SymbolsDescriptionMinMaxUnit
V
Reference Document
V
V

VIN 

V
Supply voltage4.755.25V
VV

...


CH1-, CH1+Analog input voltage on amplifier U12 pin 1, 10-3030VAD8251 datasheet

T_STG

Storage Temperature-25+85°C


Recommended Operating Conditions

Operating temperature range depends also on customer design and cooling solution. Please contact us for options.

Scroll Title
anchorTable_TS_ROC
titleRecommended operating conditions.

Scroll Table Layout
widths
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Parameter
SymbolsMinMax
Units
UnitReference Document
VSee ???? datasheets.VSee Xilinx ???? datasheet.VSee Xilinx ???? datasheet.VSee Xilinx ???? datasheet.VSee Xilinx ???? datasheet.VSee Xilinx ???? datasheet.VSee Xilinx ???? datasheet.°CSee Xilinx ???? datasheet.°CSee Xilinx ???? datasheet.

Physical Dimensions

...

VIN supply voltage (5.0V nominal)

4.755.25V
Analog input voltage on amplifier U12 pin 1 (CH1-), 10 (CH1+)-1010VAD8251 datasheet

T_OP

0+70°CW9864G6JT-6 datasheet


Physical Dimensions

Module size: 25 mm × 86.5 mm.  Please download the assembly diagram for exact numbers

...

.

PCB thickness: ?? 1.22 mm.

Page properties
hiddentrue
idComments

In 'Physical Dimension' section, top and button view of moduloe must be insterted, information regarding physical dimention can be obtained through webpage for product in Shop.Trenz, (Download> Documents> Assembly part)for every SoM.

For Example: for Module TE0728, Physical Dimension information can be captured by snipping tools from the link below:

https://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/Modules_and_Module_Carriers/5.2x7.6/TE0745/REV02/Documents/AD-TE0745-02-30-1I.PDF

Note

For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .


...

Scroll Title
anchorFigure_TS_PD
titlePhysical Dimension


scroll-
Scroll Ignore

Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue

draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramNameTEI0015_TS_PD
simpleViewerfalse
linksauto
tbstylehidden
lboxtrue
diagramWidth641
revision1


Scroll Only
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue

image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixedImage Added


Currently Offered Variants 

Page properties
hiddentrue
idComments

Set correct link to the shop page overview table of the product on English and German.

Example for TE0728:

ENG Page: https://shop.trenz-electronic.de/en/Products/Trenz-Electronic/TE07XX-Zynq-SoC/TE0728-Zynq-SoC/

DEU Page: https://shop.trenz-electronic.de/de/Produkte/Trenz-Electronic/TE07XX-Zynq-SoC/TE0728-Zynq-SoC/

if not available, set.

  • https://shop.trenz-electronic.de/de/Produkte/Trenz-Electronic/

  • https://shop.trenz-electronic.de/en/Products/Trenz-Electronic/

    .


    Scroll Title
    anchorTable_VCP_SO
    titleTrenz Electronic Shop Overview

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    Trenz shop TEI0015 overview page
    English pageGerman page


    Revision History

    Hardware Revision History

    Scroll Title
    anchorTable_RH_HRH
    titleHardware Revision History

    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    DateRevisionChangesDocumentation Link
    2019-02-1101-REV01


    Hardware revision number can be found on the PCB board together with the module model number separated by the dash.

    -
    Scroll Title
    anchorTableFigure_VCPRV_SOHRN
    titleTrenz Electronic Shop Overview Board hardware revision number.


    scroll-
    tablelayout
    ignore
    orientation

    draw.io Diagram

    portrait

    border

    sortDirection

    false

    ASC

    viewerToolbar

    repeatTableHeaders

    true

    default

    fitWindow

    style
    Scroll Title
    anchorTable_RH_HRH
    titleHardware Revision History
    Scroll Table Layout
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    stylewidths
    sortByColumn1
    sortEnabledfalse
    cellHighlightingtrue
    DateRevisionChanges

    false

    widthssortByColumn1sortEnabledfalsecellHighlightingtrueTrenz shop TE0728 overview pageEnglish pageGerman page

    Revision History

    Hardware Revision History

    List of online PCN ...Link

    diagramNameTEI0015_RH_RHN
    simpleViewerfalse
    linksauto
    tbstylehidden
    lboxtrue
    diagramWidth158
    revision2


    Scroll Only
    scroll-pdftrue
    scroll-officetrue
    scroll-chmtrue
    scroll-docbooktrue
    scroll-eclipsehelptrue
    scroll-epubtrue
    scroll-htmltrue

    Image Added


    Document Change History

    Page properties
    hiddentrue
    idComments
    • Note this list must be only updated, if the document is online on public doc!
    • It's semi automatically, so do following
      • Add new row below first

      • Copy "Page Information Macro(date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template

      • Metadata is only used of compatibility of older exports

    ...

    Scroll Title
    anchorTable_RH_DCH
    titleDocument change history.

    Scroll Table Layout
    style
    orientationportrait
    sortDirectionASC
    repeatTableHeadersdefault
    widthssortByColumn1
    sortEnabledfalse
    cellHighlightingtrue

    DateRevisionContributorDescription

    Page info
    infoTypeModified date
    dateFormatyyyy-MM-dd
    typeFlat

    Page info
    infoTypeCurrent version
    prefixv.
    typeFlat
    showVersionsfalse

    Page info
    infoTypeModified by
    typeFlat
    showVersionsfalse

    change list

    • multiple sections updated

    2020-02-04

    v.98ED
    • Technical Specifications updated

    • Power Rails updated

    --

    all

    Page info
    infoTypeModified users
    typeFlat
    showVersionsfalse

    • --


    ...