Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Connect MiniUSB cable to J28 XMOD (XMOD2 label)
  2. Set TEBF0808 DIP Switch S4-3 in ON position
  3. Power ON the board (ATX Power or external 12V)
  4. Run "Lattice Diamond Programmer"
  5. Select "Create new project from JTAG chain" and press "OK"

  6. Select Port: FTUSB-1
    After scan 2 MachXO2 devices should be detected in chain

  7. Select "LCMXO2-1200HC" as "Device" for both columns.
  8. In first column click to "File Name" and then to "...". Select "SCM_REV*.jed" file (Master CPLD File).

  9. In second column click to "File Name" and then to "...". Select "SCS_REV06.jed" file (SlaveCPLD File).

  10. Run "Design"->"Program" from main menu

  11. Wait operations to complete

...