Page History

<!-- tables have all same width (web max 1200px and pdf full page(640px), flexible width or fix width on menu for single column can be used as before) -->
<style>
.wrapped{
  width: 100% !important;
  max-width: 1200px !important;
 }
</style>

Overview

The Cyclone10 LP Reference Kit is the world's first development board with a 55kLE Intel Cyclone 10 LP and a variety of interfaces for numerous applications. The board is comprehensively tested and ready for use with end products and can also be ordered in customer-specific variants according to your requirements.

Refer to http://trenz.org/tei0009-info for the current online version of this manual and other available documentation.

Key Features

• Intel® Cyclone 10 LP  [10CL055YU484C8G],
  • Package: UBGA-484
  • Speed Grade: 8 (Slowest)
  • Temperature: 0°C ~ 85°C
  • Package compatible device 10CL016, 10CL040, 10CL080 as assembly variant on request is possible
• 16 MBit flash memory (optional up to 32 MBit possible)
• Integrated USB2.0 Programmer
• Pin Header connectors
• 256 MBit (optional up to 512 MBit possible) SDRAM
• 128 MBit (optional up to 512 MBit possible) User Quad-SPI Flash memory
• 64 MBit HyperRAM(Pseudo SRAM) (optional up to 128 MBit possible)
• FTDI - System Controller (CPLD)
• 2x MAC address EEPROM
• 2x Fast Ethernet PHY (10/100 Mbps)
• 8-channel, 12-bit, configurable ADC /DAC with on-chip reference
• D-Sub connector
• 2x RJ45 connector
• LEDs:
  • Status LEDs, Power LED
  • 13x User LEDs
  • 7-segment display
• Push bottuns:
  • 2x Reset Push buttons
  • 5x User Push buttons
• I/O:
  • GPIO: 321
  • LVDS: 132
• Power Supply: 
  • 5 V
  • Minimum 1A
• Others:
  • Reverse polarity of supply voltage protection
  • Under/Over voltage protection

Block Diagram

Main Components

1. Barrel Jack, J12
2. RJ45 socket, J8...9
3. D-Sub Connector, J11
4. Push button(Reset), S7
5. Grove connector, J5
6. Under/Over Voltage Protecter, U9
7. 7-segment LED, D11
8. 1x6 pin header, J4
9. 1x8 pin header, J2...3
10. User Red LEDs, D2...9
11. 8x User Red LEDs, D13...17
12. 5x User Push buttons, S1- S3...6
13. Red LED (CONF_DONE), D10
14. PSRAM memory, U3
15. SDRAM memory, U10
16. Voltage Regulator, U5- U7
17. AD/DA Convertor, U2
18. Pmod 2x6 SMD host socket, P1...6
19. Intel®Cyclone 10 LP, U1
20. Configuration memory, U5
21. 1x10 pin header, J1
22. EEEPROM, U15- U18- U20
23. FTDI USB2 to JTAG/UART adapter, U14
24. Micro USB 2.0 (receptacle) J10
25. Push button (RST_GPIO), S2
26. Oscillator, U22
27. Ethernet PHY, U17- U19
28. QSPI Flash memory, U12

Initial Delivery State

Configuration Signals

Configuration mode has been set to AS (Active Serial) configuration. 

RESET pin can be set through the push button S1.

Signals, Interfaces and Pins

I/Os on Pin Headers and Connectors

FPGA bank number and number of I/O signals connected to the B2B connector:

PMod SMD Host Socket

TEI0009 has 6 PMod 2x6 SMD Host Socket 90° which are connected to Cyclon 10 LP (U1).

UART Interface

UART access to TEI0009 is available on 1x8 pin header J2. 

Micro USB2.0 Connector

U14(FTDI FT2232) can be accessed through Micro USB2.0 B Receptacle 90 (J10).

RJ45 Connectors

TEI0009 is equipped with two RJ45 connectors and two Ethernet PHYs. RJ45 connectors J8 and J9 are connected to Ethernet PHYs U17 and U19 respectively. .

D-Sub Connectors

TEI0009 is equipped with a D-Sub connector (Receptacle) which provides interface to Cyclone 10 LP through Bank 2.

On-board Peripherals

QSPI Flash Memory

There is a 64MBit QSPI Flash memory (U12) provided by Winbond which can be used to store data or configuration.

SDRAM Memory

The TEI0009 has 256 MBit volatile provided by Winbond , SDRAM IC(U10) for storing user application code and data. Up to 512 MBit SDRAM is possibleon other assembly option.

• Part number: W9864G6JT-6-ND

• Supply voltage: 3.3 V

• Clock Frequency: 166MHz

• Temperature: 0°C ~ 70°C

PSRAM Memory

The TEI0009 is integrated with 64Mbit Pseudo Static Random Access Memory (PSRAM) using a self-refresh DRAM array organized as 8M words by 8 bits. The device supports a HyperBus interface, Very Low Signal Count (Address, Command and data through 8 DQ pins), Hidden Refresh Operation, and Automotive Temperature Operation. 

• Part number: IS66WVH8M8BLL

• Supply voltage: 3.3 V

• Clock Frequency: 100MHz

• Temperature: -40°C ~ 85°C

7 Segment LED

The TEI0009 has a LED 7 Segment- 4 Digit which is connected to Bank 6.

FTDI FT2232

The FTDI chip U14 converts signals from USB2.0 to a variety of standard serial and parallel interfaces. Refer to the FTDI data sheet to get information about the capacity of the FT2232H chip.
FTDI FT2232H chip is used in MPPSE mode for JTAG, 6 I/O's of Channel B are routed to FPGA bank 8 of the FPGA SoC and are usable for example as GPIOs, UART or other standard interfaces.

The configuration of FTDI FT2232H chip is pre-programmed on the EEPROM U15.

Configuration Memory

On-board serial configuration memory (U5) is provided by Intel with 16 MBit (2 MByte) storage capacity. This non volatile memory is used to store initial FPGA configuration via JTAG interface. The memory is connected to FPGA bank 1 via active serial (AS) x1 interface.

Ethernet PHY

The TEI0009 is equipped with two Ethernet PHY (U19, U17) which are connected to two RJ45 connectors. 

EEPROM

TEI0009 has three EEPROM, U15, U18 and U20. U15 is pre-programmed by FTDI FT2232H configuration.

ADC/DAC

The TEI0009 module is equipped with 12bit ADC/DAC (U2).

LEDs

Clock Sources

Power and Power-On Sequence

Power Supply

Power supply with minimum current capability of 1A for system startup is recommended.

Power Consumption

* TBD - To Be Determined

Power Distribution Dependencies

Power-On Sequence

There is no power on sequence, After power on, all regulators will be enabled as you can see in the diagram below.

Voltage Monitor Circuit

There is a diod (D12) which protects the board from reverse polarity, Additionaly there is an Over/under voltage (IC) which protects the board from over voltage damages.

Power Rails

Bank Voltages

Technical Specifications

Absolute Maximum Ratings

Recommended Operating Conditions

Operating temperature range depends also on customer design and cooling solution. Please contact us for options.

Physical Dimensions

• Module size: 95 mm × 110 mm.  Please download the assembly diagram for exact numbers.

• PCB thickness: 1.6 mm.

Currently Offered Variants 

Revision History

Hardware Revision History

Hardware revision number can be found on the PCB board together with the module model number separated by the dash.

Document Change History

Disclaimer