Page History
...
SMA Connector, J5...6
Amplifier, U12- U14- U6
Series Voltage Reference, U8
Analog to Digital Convertor, U15
Voltage Regulator, U10- U13- U16
Switching Voltage Regulator, U11- U4
Intel® MAX 10, U1
SDRAM Memory, U2
SPI Flash Active serial Memory, U5
12.00 MHz MEMS oscillator, U7
FTDI USB2 to JTAG/UART adapter, U3
User LEDs, D2...9
4Kb EEPROM, U9
Configuration LED (Red) , D10
Power-on LED (Green), D1
Push button, S1...2
Micro USB2 Receptacle, J9
1x14 pin header (Not assembled), J2
1x6 pin header (Not assembled), J4
Jumper, J3
1x14 pin header (Not assembled), J1
...
Scroll Title | |||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||||||||||||||||||||||||||||||
|
SDRAM
TEI0015 is equipped with a Winbond 64 MBit (8 MByte) SDRAM chip in standard configuration, variants with 256 Mbit (32 MByte) memory density are also available. The SDRAM chip is connected to the FPGA bank 3 and 6 via 16-bit memory interface with 166MHz clock frequency and CL3 CAS latency.
...
Scroll Title | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
...
Active Serial Configuration
On-board serial configuration memory (U5) is provided by Winbond with 64 MBit (8 MByte) storage capacity. This non volatile memory is used to store initial FPGA configuration via JTAG interface. The memory is connected to FPGA bank 8 via SPI interface.
...