Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: corrected support mail link subject

...


CompanyTrenz Electronic GmbH
PCN NumberPCN-20190829
Title

TEB0724-02 Under Voltage Protection Change 

SubjectTrenz Electronic TEB0724 Hardware Change
Issue Date

2019-09-0105

Products Affected

This change affects TEB0724 carrier of revision TEB0724-02 with serial numbers greater than 568263.

affected product

TEB0724-02


Changes

#1 Replaced R40 by 953kOhm and R44 by 147kOhm

Type: BOM change

Reason: Large start up currents led due to adverse conditions (e.g. weak powersupply, long wires, increased contact resistance) to current drops a voltage drop below the under voltage lock out limit of the input protection circuit.

Impact: Undervoltage Under voltage protection limit is decreased to 4.06V, which gives a larger marging for current drops a voltage drop during start up.

Method of Identification

The Serial number is written on a white QR Code sticker and placed on the top side of the PCB within the white frame. The model code and revision number (TEB0724-02) are printed on the top side of the PCB.

draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision2
diagramNameTEB0724-02_Serial
simpleViewerfalse
width400
linksauto
tbstyletop
diagramWidth521

Production Shipment Schedule

September 2019, after old stock is gone.

Contact Information

If you have any questions related to this PCN, please contact Trenz Electronic's Technical Support at

Disclaimer

Any projected dates in this PCN are based on the most current product information at the time this PCN is being
issued, but they may change due to unforeseen circumstances.  For the latest schedule and any other information,
please contact your local Trenz Electronic sales office, technical support or local distributor.

...