...
There is a DIP switch, S2, on TE0790 adapter which must be set accordinglyas following.
| Scroll Title |
|---|
| anchor | Table_SIP_Xmod_DIP |
|---|
| title | Xmod Adapter DIP-Switch Setting Description |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| DIP Switch,S2 | ON | OFF | Default | Description |
|---|
| 1Normal mode | Adapter board CPLD update mode | ON | Update Mode JTAG access to SC CPLD only | | 2Do not use (illegal setting) | Normal mode | OFF | Must be always in OFF state. | | 3 | OFF | VIO is supplied from Module | | 4 | OFF | 3.3V is supplied by the carrier TEBT0808 | VIO connected to 3.3V | Power VIO from pin header J2 | OFF | User I/O Voltage | 4 | Power 3.3V from USB | Power 3.3V from pin header J2 | OFF | Power on-board peripherals (FTDI chip & SC CPLD, ...) |
|
The voltages 3.3V (VCC) and VIO (variable SC CPLD I/O-voltage) can be configured by the DIP-switch S2-3 and S2-4 on TE0790:
...