Download PDF version of this document.
Table of Contents
The Trenz Electronic TEBT0782 is a carrier for TE0782, TE0783 and TE0784 module.
Refer to http://trenz.org/tebt0782-info for the current online version of this manual and other available documentation.
Storage device name | Content | Notes |
---|---|---|
- | - | - |
Signal | B2B | Note |
---|---|---|
RESIN | JBC3-130 | Board Reset |
FPGA bank number and number of I/O signals connected to the B2B connector:
B2B Connector | Interface | Number of I/O | Notes |
---|---|---|---|
JBC1 | RJ45, J1B-J1C | 1 Differential pair, 2 Single Ended | Yellow, Green LEDs |
RJ45, J1A | 4 Differential pair, 8 Single Ended | ||
RJ45, J2B-J2C | 1 Differential pair, 2 Single Ended | Yellow, Green LEDs | |
RJ45, J2A | 4 Differential pair, 8 Single Ended | ||
TE0790 Base, J8 | 4 Single Ended | ||
TE0790 Base, J7 | 1 Single Ended | ||
USB A Stacked, U7 | 2 Single Ended | ||
Power Switch, U1 | 2 Single Ended | ||
SMD Line Filter, L6 | 1 Differential pair, 2 Single Ended | ||
SMD Line Filter, L7 | 1 Differential pair, 2 Single Ended | ||
JBC2 | Module TE0782...4 FPGA, Bank 111-112 | 16 Differential pair, 32 Single Ended | MGT_RX8...15, MGT_TX8...15 |
Module TE0782...4 FPGA, Bank 34 | 1 Differential pair, 2 Single Ended | J1_B34_VRP, J1_B34_VRN | |
Module TE0782...4 FPGA, Bank 34 | 1 Differential pair, 2 Single Ended | J1_B33_VRP, J1_B33_VRN | |
JBC3 | TE0790 Base, J8 | 4 Single Ended | M_TCK, M_TMS, M_TDO, M_TDI |
TE0790 Base, J7 | 4 Single Ended 2 Single Ended 1 Single Ended | TCK, TMS, TDO, TDI UART RX/TX RESIN | |
DIP Switch, S1-A | 1 Single Ended | JTAGENB | |
SMA Coaxial, J3...6 | 2 Differential pair, 4 Single Ended | MGT_RX0, MGT_TX0 | |
Module TE0782...4 FPGA, Bank 109-110 | 16 Differential pair, 32 Single Ended | MGT_RX1...7, MGT_TX0...7 |
Two JTAG accesses to the TEBT0782 SoMs are available through B2B connector JB3. JTAGENB is connected to DIP Switch S1-A.
TE0790 Base | JTAG Signal | B2B Connector | Notes |
---|---|---|---|
J8 | TMS | JB3C-142 | |
TDI | JB3C-147 | ||
TDO | JB3C-148 | ||
TCK | JB3C-141 | ||
J8 | M_TMS | JB3B-182 | |
M_TDI | JB3B-187 | ||
M_TDO | JB3B-188 | ||
M_TCK | JB3B-181 |
Signal State | B2B | Notes |
---|---|---|
XMOD_A | JB3C- 129 | Used as UART TX line |
XMOD_B | JB3C- 135 | Used as UART RX line |
Signal Name | RJ45-J1 | RJ45-J2 Pin | Notes |
---|---|---|---|
B2B | |||
PHY_MDI0_P | JB1A-23 | JB1A-39 | |
PHY_MDI0_N | JB1A-21 | JB1A-37 | |
PHY_MDI1_P | JB1A-19 | JB1A-35 | |
PHY_MDI1_N | JB1A-17 | JB1A-33 | |
PHY_MDI2_P | JB1A-15 | JB1A-31 | |
PHY_MDI2_N | JB1A-13 | JB1A-29 | |
PHY_MDI3_P | JB1A-11 | JB1A-27 | |
PHY_MDI3_N | JB1A-9 | JB1A-25 | |
J2_TX9_P | JB1A-95 | - | LED Green/Yellow |
J2_TX9_N | JB1A-97 | - | LED Green/Yellow |
J2_RX9_N | - | JB1A-96 | LED Green/Yellow |
J2_RX9_P | - | JB1A-98 | LED Green/Yellow |
The USB A Stacked, U7 is a dual port USB Socket which provides two USB connectors.
Signal Name | Port A | Port B | Notes | ||
---|---|---|---|---|---|
B2B | Connected to | B2B | Connected to | ||
USB_D_P | JB1A-28 | SMD Line Filter, L7 | JB1A-40 | SMD Line Filter, L6 | |
USB_D_N | JB1A-26 | SMD Line Filter, L7 | JB1A-38 | SMD Line Filter, L6 | |
USB_VBUS | JB1A-24 | SMD Line Filter, L7 | JB1A-36 | SMD Line Filter, L6 | |
VBUS_V_EN | JB1A-30 | Power Switch, U1 | JB1A-32 | Power Switch, U1 |
The TEBT0782 carrier is equipped with 4 SMA Coaxial connectors.
Designator | Schematic | B2B | Notes |
---|---|---|---|
J3 | MGT_TX0_N | JB3A-29 | |
J4 | MGT_TX0_P | JB3A-31 | |
J5 | MGT_RX0_N | JB3A-30 | |
J6 | MGT_RX0_P | JB3A-32 |
Chip/Interface | Designator | Notes |
---|---|---|
DIP Switch | S1 |
Switch | Connected to | B2B | Notes |
---|---|---|---|
S1A | JTABENB | JB3C-36 |
Power supply with minimum current capability of 2.5 A for system startup is recommended.
Power Input Pin | Typical Current |
---|---|
VIN | TBD* |
* TBD - To Be Determined
Create DrawIO object here: Attention if you copy from other page, objects are only linked.
Power Rail Name | B2B JM1 Pin | B2B JM2 Pin | B2B JM3 Pin | Voltage | Notes |
---|---|---|---|---|---|
VCCIO13 | 99, 100 | 3.3 V | |||
CPLD VCC IN | 147,148 | 3.3 V | |||
VCCIO12 | 159,160 | 3.3 V | |||
VCCIO33 | 99,100 | 1.8 V | |||
VCCIO34 | 159,160 | 1.8 V | |||
VCCIO10 | 99,100 | 3.3 V | |||
VCCIO11 | 159,160 | 3.3 V |
? x ? modules use two or three Samtec Micro Tiger Eye Connector on the bottom side.
3 x REF-??????? (compatible to ????????), (?? pins, ?? per row)
Operating Temperature: -??°C ~ ??°C
Current Rating: ??A per ContactNumber of Positions: ??
Number of Rows: ??
Symbols | Description | Min | Max | Unit |
---|---|---|---|---|
V | ||||
V | ||||
V | ||||
V | ||||
V | ||||
V | ||||
V | ||||
V | ||||
Operating temperature range depends also on customer design and cooling solution. Please contact us for options.
Parameter | Min | Max | Units | Reference Document |
---|---|---|---|---|
V | See ???? datasheets. | |||
V | See Xilinx ???? datasheet. | |||
V | See Xilinx ???? datasheet. | |||
V | See Xilinx ???? datasheet. | |||
V | See Xilinx ???? datasheet. | |||
V | See Xilinx ???? datasheet. | |||
V | See Xilinx ???? datasheet. | |||
°C | See Xilinx ???? datasheet. | |||
°C | See Xilinx ???? datasheet. |
Module size: 116 mm × 116 mm. Please download the assembly diagram for exact numbers.
Mating height with standard connectors: ? mm.
PCB thickness: 1.6 mm.
Trenz shop TE0728 overview page | |
---|---|
English page | German page |
Date | Revision | Changes | Documentation Link |
---|---|---|---|
- | |||
Hardware revision number can be found on the PCB board together with the module model number separated by the dash.
Date | Revision | Contributor | Description |
---|---|---|---|
| |||
-- | all |
|
Please also note our data protection declaration at https://www.trenz-electronic.de/en/Data-protection-Privacy
The material contained in this document is provided “as is” and is subject to being changed at any time without notice. Trenz Electronic does not warrant the accuracy and completeness of the materials in this document. Further, to the maximum extent permitted by applicable law, Trenz Electronic disclaims all warranties, either express or implied, with regard to this document and any information contained herein, including but not limited to the implied warranties of merchantability, fitness for a particular purpose or non infringement of intellectual property. Trenz Electronic shall not be liable for errors or for incidental or consequential damages in connection with the furnishing, use, or performance of this document or of any information contained herein.
In no event will Trenz Electronic, its suppliers, or other third parties mentioned in this document be liable for any damages whatsoever (including, without limitation, those resulting from lost profits, lost data or business interruption) arising out of the use, inability to use, or the results of use of this document, any documents linked to this document, or the materials or information contained at any or all such documents. If your use of the materials or information from this document results in the need for servicing, repair or correction of equipment or data, you assume all costs thereof.
No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Trenz Electronic.
The hardware / firmware / software described in this document are furnished under a license and may be used /modified / copied only in accordance with the terms of such license.
To confront directly with the responsibility toward the environment, the global community and eventually also oneself. Such a resolution should be integral part not only of everybody's life. Also enterprises shall be conscious of their social responsibility and contribute to the preservation of our common living space. That is why Trenz Electronic invests in the protection of our Environment.
REACH
Trenz Electronic is a manufacturer and a distributor of electronic products. It is therefore a so called downstream user in the sense of REACH. The products we supply to you are solely non-chemical products (goods). Moreover and under normal and reasonably foreseeable circumstances of application, the goods supplied to you shall not release any substance. For that, Trenz Electronic is obliged to neither register nor to provide safety data sheet. According to present knowledge and to best of our knowledge, no SVHC (Substances of Very High Concern) on the Candidate List are contained in our products. Furthermore, we will immediately and unsolicited inform our customers in compliance with REACH - Article 33 if any substance present in our goods (above a concentration of 0,1 % weight by weight) will be classified as SVHC by the European Chemicals Agency (ECHA).
RoHS
Trenz Electronic GmbH herewith declares that all its products are developed, manufactured and distributed RoHS compliant.
WEEE
Information for users within the European Union in accordance with Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE).
Users of electrical and electronic equipment in private households are required not to dispose of waste electrical and electronic equipment as unsorted municipal waste and to collect such waste electrical and electronic equipment separately. By the 13 August 2005, Member States shall have ensured that systems are set up allowing final holders and distributors to return waste electrical and electronic equipment at least free of charge. Member States shall ensure the availability and accessibility of the necessary collection facilities. Separate collection is the precondition to ensure specific treatment and recycling of waste electrical and electronic equipment and is necessary to achieve the chosen level of protection of human health and the environment in the European Union. Consumers have to actively contribute to the success of such collection and the return of waste electrical and electronic equipment. Presence of hazardous substances in electrical and electronic equipment results in potential effects on the environment and human health. The symbol consisting of the crossed-out wheeled bin indicates separate collection for waste electrical and electronic equipment.
Trenz Electronic is registered under WEEE-Reg.-Nr. DE97922676.