You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 10 Next »
Download PDF version of this document.
The Trenz Electronic AMB0010 is a commercial grade baseboard for Andromeda modules.
Refer to http://trenz.org/amb0010-info for the current online version of this manual and other available documentation.
Storage device name | Content | Notes |
---|---|---|
- | - | - |
Connector Type | Designator | Interface | IO CNT | Notes |
---|---|---|---|---|
B2B | JB5 | HP | 104 SE / 48 DIFF | |
B2B | JB5 | MGT PL | 4 x MGT (RX/TX) | |
B2B | JB5 | MGT PL | 2 x MGT CLK | |
B2B | JB5 | HD | 24 SE / 12 DIFF | |
B2B | JB6 | HP | 52 SE / 24 DIFF | |
B2B | JB6 | MGT PS | 4 x MGT (RX/TX) | |
B2B | JB6 | MGT PS | 2 x MGT CLK | |
B2B | JB6 | HD | 24 SE / 12 DIFF | |
B2B | JB6 | MIO | 2 x I2C | |
B2B | JB6 | MIO | 2 x UART | |
B2B | JB6 | MIO | 2 x PERST | |
B2B | JB6 | MIO | SDIO | |
B2B | JB6 | MIO | JTAG | |
B2B | JB6 | MIO | 4 x GPIO | |
B2B | JB6 | ETH | ||
B2B | JB6 | USB | ||
RJ45 | J11 | ETH | ||
XMOD | JB1 | JTAG | JTAG | |
XMOD | JB1 | UART | UART | |
Pin Header | J8 | UART | UART | |
Pin Header | J19 | I2C | I2C | |
Power Jack | J1 | PWR | PWR | |
SD Card Socket | J13 | SDIO | SDIO | |
USB Socket | J12 | USB | USB |
Test Point | Signal | Connected to | Notes |
---|---|---|---|
TP1 | +12.0V_input | ||
TP2 | +12.0V_input | ||
TP3 | V_MOD1 | C2M | |
TP4 | V_MOD1 | C2M | |
TP5 | Carrier_+3V3 | C2M | |
TP6 | Carrier_+3V3 | C2M | |
TP7 | Carrier_+1V8 | C2M | |
TP8 | Carrier_+1V8 | C2M | |
TP9 | Module_+3.3V | JB6, U4 | M2C |
TP10 | Module_+3.3V | JB6, U4 | M2C |
TP11 | Module_+1.8V | JB5, JB6 | M2C |
TP12 | Module_+1.8V | JB5, JB6 | M2C |
TP13 | PWR_EN | JB6, S4 | PWR_EN is pulled-up in module AM0010 to 3.3▒V. |
TP14 | PWR_EN | JB6, S4 | PWR_EN is pulled-up in module AM0010 to 3.3▒V. |
TP15 | Carrier_USB+5V | ||
TP16 | Carrier_USB+5V | ||
TP17 | PG_Carrier_+1V8 | U2, U3, U4, U5, U6, U7, U12 | |
TP18 | PG_Carrier_+1V8 | U2, U3, U4, U5, U6, U7, U12 | |
TP19 | Carrier_PG | U3, U6, T7 (LED D5) | |
TP20 | Carrier_PG | U3, U6, T7 (LED D5) | |
TP21 | PG_Carrier_USB+5V | U7, U12 | |
TP22 | PG_Carrier_USB+5V | U7, U12 | |
TP23 | PWR_GOOD | JB6, U4 | M2C, pulled-up in module AM0010 to 3.3 V. |
TP24 | PWR_GOOD | JB6, U4 | M2C, pulled-up in module AM0010 to 3.3 V. |
TP25 | USB-VBUS | ||
TP26 | USB-VBUS | ||
TP27 | IO_X0_D12_P | JB6 | |
TP28 | IO_X0_D12_P | JB6 | |
TP29 | M_SDA | JB6 | |
TP30 | M_SDA | JB6 | |
TP31 | M_SCL | JB6 | |
TP32 | M_SCL | JB6 | |
TP33 | RST_M2C# | JB6 | |
TP34 | RST_M2C# | JB6 | |
TP35 | U_INT | JB6 | |
TP36 | U_INT | JB6 | |
TP37 | PS_POR# | JB6, S3 | PS_POR# is pulled up in module AM0010 to Carrier_+3V3 (V_IO_CFG). |
TP38 | PS_POR# | JB6, S3 | PS_POR# is pulled up in module AM0010 to Carrier_+3V3 (V_IO_CFG). |
TP39 | PS_SRST# | JB6, S1 | PS_SRST# is pulled up in module AM0010 to Carrier_+3V3 (V_IO_CFG). |
TP40 | PS_SRST# | JB6, S1 | PS_SRST# is pulled up in module AM0010 to Carrier_+3V3 (V_IO_CFG). |
TP41 | DX_P | JB6 | |
TP42 | DX_P | JB6 | |
TP43 | DX_N | JB6 | |
TP44 | DX_N | JB6 | |
TP45 | M_INT | JB6 | |
TP46 | M_INT | JB6 |
Chip/Interface | Designator | Connected To | Notes |
---|---|---|---|
Oscillator | U10 | U11 | |
Clock Buffer | U11 | JB5 | |
RJ45 LAN Socket | J11 | JB6 | |
XMOD | JB1 | JB6 | |
Pin Header | J8 | JB6 | |
Pin Header | J19 | JB6 | |
Power Jack | J1 | ||
Micro SD Card Socket | J13 | JB6 via U13 | |
USB Socket | J12 | JB6 via L7 |
Connector+Pin | Signal Name | Direction | Description |
---|---|---|---|
JB6.A59 | V_BAT | C2M | Input voltage for VCC_PSBATT |
JB6.B58 | RST_M2C# | M2C | Module reset for peripheral reset |
JB6.C53 | DONE | M2C | FPGA PS_DONE-signal |
JB6.C54 | MODE0 | C2M | Boot mode selection |
JB6.C55 | MODE1 | C2M | Boot mode selection |
JB6.C56 | MODE2 | C2M | Boot mode selection |
JB6.C57 | MODE3 | C2M | Boot mode selection |
JB6.C58 | PS_SRST# | C2M | FPGA system reset |
JB6.C59 | PS_POR# | bidirectional | Power-on-reset status |
JB6.D56 | DX_P | C2M | Temperature sensing diode pin |
JB6.D57 | DX_N | C2M | Temperature sensing diode pin |
JB6.D58 | PWR_EN | C2M | Power Enable |
JB6.D59 | PWR_GOOD | M2C | Power good status |
Legend:
C2M: Carrier to Module
M2C: Module to Carrier
Power Rail Name/ Schematic Name | Connector + Pin | Direction | Notes |
---|---|---|---|
V_MOD1 | JB5.A7 | C2M | |
V_MOD1 | JB5.A15 | C2M | |
V_MOD1 | JB5.A47 | C2M | |
V_MOD1 | JB5.A55 | C2M | |
V_MOD1 | JB5.B5 | C2M | |
V_MOD1 | JB5.B11 | C2M | |
V_MOD1 | JB5.B17 | C2M | |
V_MOD1 | JB5.B45 | C2M | |
V_MOD1 | JB5.B51 | C2M | |
V_MOD1 | JB5.B57 | C2M | |
Module_+1.8V | JB5.C7 | M2C | |
Module_+1.8V | JB5.C15 | M2C | |
Carrier_+1V8 | JB5.D3 | C2M | |
Carrier_+1V8 | JB5.D17 | C2M | |
Carrier_+3V3 | JB5.D40 | C2M | |
Carrier_+1V8 | JB5.D43 | C2M | |
Carrier_+1V8 | JB5.D57 | C2M | |
Carrier_+1V8 | JB6.A3 | C2M | |
Carrier_+1V8 | JB6.A17 | C2M | |
Carrier_+1V8 | JB6.A59 | C2M | |
Module_+1.8V | JB6.B7 | M2C | |
Module_+1.8V | JB6.B15 | M2C | |
Carrier_+3V3 | JB6.B35 | C2M | |
Module_+3.3V | JB6.B59 | M2C | |
V_MOD1 | JB6.C5 | C2M | |
V_MOD1 | JB6.C11 | C2M | |
V_MOD1 | JB6.C17 | C2M | |
Carrier_+3V3 | JB6.C52 | C2M | |
V_MOD1 | JB6.D7 | C2M | |
V_MOD1 | JB6.D15 | C2M | |
Carrier_+3V3 | JB1.5 | C2M | |
Carrier_+3V3 | JB1.6 | C2M | |
Carrier_+3V3 | J8.1 | C2M | |
Carrier_+3V3 | J19.1 | C2M | |
+12.0V_input | J1.1 | 2M |
Legend:
C2M: Carrier to Module
2M: to Module
M2C: Module to Carrier
Power Rail Name/ Schematic Name | Description | Min | Max | Unit |
---|---|---|---|---|
+12.0V_input | Power Supply | 11.0 | 13.0 | V |
This TRM is generic for all variants. Temperature range can be differ depending on the assembly version. Voltage range is mostly the same during variants (exceptions are possible, depending on custom request)
Operating temperature range depends also on customer design and cooling solution. Please contact us for options.
Power Rail Name/ Schematic Name | Min | Typical | Max | Units | Reference Document |
---|---|---|---|---|---|
+12.0V_input | 11.0 | 12.0 | 13.0 | V | See LTC4365ITS8 datasheets. |
Module size: 128 mm × 106 mm. Please download the assembly diagram for exact numbers.
Mating height with standard connectors: 5 mm.
PCB thickness: 1.6 mm.
Trenz shop AMB0010 overview page | |
---|---|
English page | German page |
Date | Revision | Changes | Documentation Link |
---|---|---|---|
- | REV01 | Initial Revision |
Hardware revision number can be found on the PCB board together with the module model number separated by the dash.
Date | Revision | Contributor | Description |
---|---|---|---|
Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] | Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] | Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] |
|
-- | all | Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] |
|
Please also note our data protection declaration at https://www.trenz-electronic.de/en/Data-protection-Privacy
The material contained in this document is provided “as is” and is subject to being changed at any time without notice. Trenz Electronic does not warrant the accuracy and completeness of the materials in this document. Further, to the maximum extent permitted by applicable law, Trenz Electronic disclaims all warranties, either express or implied, with regard to this document and any information contained herein, including but not limited to the implied warranties of merchantability, fitness for a particular purpose or non infringement of intellectual property. Trenz Electronic shall not be liable for errors or for incidental or consequential damages in connection with the furnishing, use, or performance of this document or of any information contained herein.
In no event will Trenz Electronic, its suppliers, or other third parties mentioned in this document be liable for any damages whatsoever (including, without limitation, those resulting from lost profits, lost data or business interruption) arising out of the use, inability to use, or the results of use of this document, any documents linked to this document, or the materials or information contained at any or all such documents. If your use of the materials or information from this document results in the need for servicing, repair or correction of equipment or data, you assume all costs thereof.
No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Trenz Electronic.
The hardware / firmware / software described in this document are furnished under a license and may be used /modified / copied only in accordance with the terms of such license.
To confront directly with the responsibility toward the environment, the global community and eventually also oneself. Such a resolution should be integral part not only of everybody's life. Also enterprises shall be conscious of their social responsibility and contribute to the preservation of our common living space. That is why Trenz Electronic invests in the protection of our Environment.
REACH
Trenz Electronic is a manufacturer and a distributor of electronic products. It is therefore a so called downstream user in the sense of REACH. The products we supply to you are solely non-chemical products (goods). Moreover and under normal and reasonably foreseeable circumstances of application, the goods supplied to you shall not release any substance. For that, Trenz Electronic is obliged to neither register nor to provide safety data sheet. According to present knowledge and to best of our knowledge, no SVHC (Substances of Very High Concern) on the Candidate List are contained in our products. Furthermore, we will immediately and unsolicited inform our customers in compliance with REACH - Article 33 if any substance present in our goods (above a concentration of 0,1 % weight by weight) will be classified as SVHC by the European Chemicals Agency (ECHA).
RoHS
Trenz Electronic GmbH herewith declares that all its products are developed, manufactured and distributed RoHS compliant.
WEEE
Information for users within the European Union in accordance with Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE).
Users of electrical and electronic equipment in private households are required not to dispose of waste electrical and electronic equipment as unsorted municipal waste and to collect such waste electrical and electronic equipment separately. By the 13 August 2005, Member States shall have ensured that systems are set up allowing final holders and distributors to return waste electrical and electronic equipment at least free of charge. Member States shall ensure the availability and accessibility of the necessary collection facilities. Separate collection is the precondition to ensure specific treatment and recycling of waste electrical and electronic equipment and is necessary to achieve the chosen level of protection of human health and the environment in the European Union. Consumers have to actively contribute to the success of such collection and the return of waste electrical and electronic equipment. Presence of hazardous substances in electrical and electronic equipment results in potential effects on the environment and human health. The symbol consisting of the crossed-out wheeled bin indicates separate collection for waste electrical and electronic equipment.
Trenz Electronic is registered under WEEE-Reg.-Nr. DE97922676.
Error rendering macro 'page-info'
Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]