TE USB FX2 Technology Stack Generation 3 released.
Firmware release, device driver release, API release, application code release.
Major change.
Trenz Electronic series | Trenz Electronic part number | base serial number |
---|---|---|
TE0300 | TE0300-01BM | |
TE0300 | TE0300-01BMLP | |
TE0300 | TE0300-01I | |
TE0300 | TE0300-01IBM | |
TE0300 | TE0300-01IBMLP | |
TE0300 | TE0300-01M | |
TE0320 | TE0320-00-EV02 | |
TE0320 | TE0320-00-EV02B | |
TE0320 | TE0320-00-EV02I | |
TE0320 | TE0320-00-EV02IB | |
TE0630 | TE0630-00I | 438891 |
TE0630 | TE0630-00IBF | 438903 |
TE0630 | TE0630-00IV | 438874 |
Firmware, device driver, API and application code are incompatible between generations.
Firmware, device driver, API and application code shall belong to the same generation.
After determining what generation your module belongs to, you have to migrate firmware, device driver, API and application code to the other generation.
Start OpenFutNet.exe. The FX2 microcontroller firmware major version corresponds to your generation.
You might have to press the "Refresh" button.
Open Device Manager and check if your operating system registered the device consistently with the generation determined by OpenFutNet.
FX2 firmware major version | generation | Device Manager | VID/PID | remarks |
---|---|---|---|---|
2 | 2nd | 0x0547/0x1002 | ||
3 | 2nd | 0x0547/0x1002 | This configuration is no longer supported. Please migrate to the above or below configuration. | |
3 | 3rd | 0x0BD0/0x0300 |
Download the FX2 microcontroller firmware file corresponding to the generation you want to migrate to. Start OpenFutNet.exe. Press the "Select *.iic file" button and browse to the firmware file. Press the "Program USB" button.
Just install the device driver corresponding to the generation you want to migrate to.
Just download the API corresponding to the generation you want to migrate to.
Pleas consult our detailed porting guides.
Please read our contact us.
and follow our recommendations. Sill in trouble? Then please