You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 4
Next »
Board Dimensions
Module size: 68 mm × 48 mm
All dimensions are shown in mm.
| B2B numbers when looking from top onto carrier board will have odd and even numbers swapped. |
---|
- TE0320 can reach a minimum vertical height of about 6 mm if push buttons and USB receptacle are not assembled.
- Two mated standard TE0320 connectors have a nominal mated height of 6.0 mm. Processing conditions and solder paste thickness affects such height, resulting in an effective mating heights of 7.0 mm. Therefore the recommended stand-off (distance bolts) height is 7 mm.
- TE0320 has 4 mounting holes, one in each corner. The module can be fixed by screwing M3 screws (ISO 262) into a carrier board through those mounting holes.
- TE0320 weighs about 25 g.
Power Supplies