JTAG signals are
VREF GND TCK TDO TDI TMS |
To connect your computer to JTAG connector J2 you typically need
Some examples of JTAG cable set are listed in the table below.
JTAG cable | flying leads | software | gender changer |
---|---|---|---|
Xilinx Platform Cable USB | included | Xilinx iMPACT | 1 × 6 pin |
Digilent XUP USB-JTAG Programming Cable | XUP Fly Wire Assembly | Xilinx iMPACT | 1 × 6 pin |
Digilent JTAG-USB Full Speed Module | not needed | Digilent Adept 2.0 | 1 × 6 pin |
Figure A below shows a standard 6-pin JTAG female header, in this case flying leads, with a gender changer header.
Figure B below shows how a JTAG cable, in this case a Xilinx Platform Cable USB with flying leads and gender changer, is connected to a TE0320.
Figure A: standard 6-pin JTAG female header with gender changer. | Figure B: sample JTAG cable connection (TE0320 side). |
The figure below shows a recommended set-up for TE0320 configuration and operation. The USB cable provides for power supply and data communication channel. The JTAG is ideal for quick configuration and effective debugging.