S2 enables / disables the reset line. The reset line (available also on 2 contacts of the B2B connector) resets the USB microcontroller and the FPGA.
S2 has to be turned off (Reset) if the user wants to program the SPI Flash memory in direct mode. For programming the SPI Flash memory in indirect mode over JTAG, S2 has to be turned on (Run).
S2 |
position |
|---|---|
Run |
system running |
Reset |
system reset |
*
Table 8: S2 (*default: Run).
For further information, please read paragraph "Software Configuration".
Overview
Content Tools