The module has two B2B (board-to-board) receptacle connectors (J4 and J5) for a total of 160 contacts. The figure below shows B2B connectors location on board; USB connector is located on the top side and is shown to define module position.
B2B connectors location
TE0630 uses high-density shockproof connectors shown in the figure below. Connector part numbers are listed in the table below.
Figure 7: Module connector
Supplier | Header |
|---|---|
Digikey | H11113CT-NDH11113TR-NDH11113DKR-ND |
Hirose | DF17(3.0)-80DS-0.5V(57) |
Trenz Electronic | 22684 |
Module connectors part numbers
The on-board receptacles mate with their corresponding headers on the carrier board shown in the figure below.
Mating (carrier board) connector
Ordering numbers of mating connectors are listed in the table below.
Supplier | Header |
|---|---|
Digikey | H11148DKR-NDH11148TR-NDH11148CT-ND |
Hirose | DF17(4.0)-80DP-0.5V(57) |
Trenz Electronic | 22938 |
Carrier board headers part numbers
Figure 9 shows the definition of stacking height featured by the combination of the TE0630 receptacle with its corresponding header.
Figure 9: B2B stacking
The stacking height of the TE0630 B2B connectors is 7 (seven) mm. The stacking height does not include the solder paste thickness.
Overview
Content Tools