The push button is connected to the PB input (pin V16). as detailed in the following table.
Signal | FPGA pin | FPGA ball |
|---|---|---|
PB | IP(bank 2) | V16 |
User button signal details.
The input is normally low. The input is pulled up when pressed.
The LED is lit when the U_LED line (pin R10) is set high as detailed in the following table.
Signal | FPGA pin | FPGA ball |
|---|---|---|
U_LED | IO_L15P_2(bank 2) | R10 |
User led signal details.
Overview
Content Tools