You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 3
Next »
The TE0300 has three on-board memories:
- DDR3 SDRAM: TE0630 is equipped with a 1 Gb (128 MB) DDR3 SDRAM chip. DDR3 memory is connected to FPGA bank 1.
- SPI Flash (serial)
TE0320 has an STMicroelectronics M25P32/64/128 (32/64/128-Mbit), low voltage, serial Flash memory with 75 MHz SPI bus interface for configuration and operating storage accessible through USB or SPI. The default module configuration contains a 32 Mbit Flash chip M25P32, other sizes are available on request. - EEPROM (serial)
TE0300 modules have a Micron Technology 24LC128 128 kbit I2C CMOS Serial EEPROM for EZ-USB FX2 firmware, vendor ID and device ID storage accessible through the EZ-USB FX2 microcontroller.