You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

The TE0300 has three on-board memories:

  • DDR3 SDRAM: TE0630 is equipped with a 1 Gb (128 MB) DDR3 SDRAM chip. DDR3 memory is connected to FPGA bank 1.
  • SPI Flash (serial)
    TE0320 has an STMicroelectronics M25P32/64/128 (32/64/128-Mbit), low voltage, serial Flash memory with 75 MHz SPI bus interface for configuration and operating storage accessible through USB or SPI. The default module configuration contains a 32 Mbit Flash chip M25P32, other sizes are available on request.
  • EEPROM (serial): TE0630 is equipped with a Micron Technology 24LC128 128 K I2C CMOS Serial EEPROM (U1). It is used for EZ-USB FX2 firmware, vendor ID and device ID storage. EEPROM is accessible through the EZ-USB FX2 microcontroller.

 

 

  • No labels