You should click "Start">"Xilinx Design Tools">"ISE Design Suite xx.x">"EDK">"Xilinx Softwate Development".
After this a pop-up will appear.
Select a workspace
In this pop-up you should choose the SDK_Workspace desired.
Workspace selected, SDK is loading
After this the SDK will starts.
Xilinx SDK starts
If the version of the SDK is higher than the version of the project opened you should follow the instruction and refresh the demo .c and .h files.
Refresh .c and .h files of demo
After refresh operation this message should appear.
End of the refresh operation
After this, even if refresh operation appears correct and no errors are reported, you should check the SDK Workspace references to TE EDK IP core drivers.
To open the SDK workspace reference repositories you should click "Xilinx Tools" > "Repositories".
Open Xilinx SDK Workspace repositories
A new pop-up windows will appear. You should remove the wrong reference clicking/selecting "B:\GIT\TE03XX-Reference-Designs\TE-EDK-IP" and clicking "Remove" button.
Preference pop-up, repositories selected
You should add the correct reference to TE EDK IP cores drivers.
Click the "New..." button and a pop-up "Select folder" will appear.
You should select the desired folder: "TE-EDK-IP" or "TE-EDK-IP\MyProcessorIPlib" should be both correct
It is better if you do not alter folder nesting because double nesting of folders is a Xilinx XPS requirements (even if it is not an SDK requirement).
Then click "OK". A new SDK reference for IP Core drivers should appear.
TE EDK IP cores drivers referencies added
Then click "OK" button. The pop-up "Preferences" will close and you should wait until the following message appears.
Build demo
You should also check the "Application Project" "demo" references.
Click/select "demo" in "Project Explorer", then click "Project">"Properties".
Open demo's project properties
The pop-up "Properties for demo" will open on "Resource"
Demo's project properties opened
You should click /select "Project References". A new window wil appear on the same pop-up.
"Demo Project References" imported from original SDK workspace
You shoul also check (
) "reference-TE0300_hw_platform".
"Demo Project References" modified
After this you should click "OK". You should wait until this mesagge will appear.
"Demo Project References" compile ends
You should also check the "Board Support Package Project" references.
Click/select "standalone_bsp_0" in "Project Explorer", then click "Project">"Properties".
Open bsp's project properties
A new pop-up window "Properties for standalone_bsp_0" will appear.
"standalone_bsp_0 project" references
In this case the bsp setting is correct. Only "reference-te0300_hw_platform" shoul be checked ().
Click "OK" and the pop-up will dissapear.
Now, you should select if you desire to debug on a real UART (rs232) or a simulated UART on JTAG (debug_module).
You should click/select "standalone_bsp_0" in "project Explorer", then you should click "Xilinx Tools" > "Board Support Package Settings".
Board Support Package Settings opening
A new pop-up will appear "Board Support Package Settings".
"Board Support Package Settings" pop-up
Change rs232 to debug_module
You should generate a new link script.
STDIO connection of RUN and DEBUG: JTAG UART
Overview
Content Tools