Recovery Boot (TE USB FX2 Firmware Recovery)

Created by Sergio Pavesi, last modified on 13 09, 2013

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

A recovery boot (aka TE USB FX2 firmware recovery) is a multi-step boot operation:

follow the same procedure of Cypress Generic USB Device Installation;
check that EEPROM connection is enabled (EEPROM switch is set in a way to enable EPPROM connection to USB FX2 microcontroler);

EEPROM connection shall always be enabled during EEPROM programming.

Cypress firmware update tools and OpenFutNet can read and write the EEPROM:
1. 1. for example using CyControl (Cypress USB Control Center);
  2. for example using CyConsole (Cypress USB Console);
  3. for example using OpenFutNet recovery boot.

See also Cypress USB Control Center recovery boot and Cypress USB Console recovery boot videos for further information.

No labels