You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 19 Next »

Before driver installation

Insert the TE USB FX2 module and then check your VID/PID in device manager (devmgmt.msc > properties > details > Hardware Ids).

Generation 2

Device driver files

Generation 2 device drivers are provided by DEWESoft and can also be downloaded from here or here.

Generation 3

Device driver files

Documentation

Description

The driver package contains many folders. During installation, the user shall specify the folder according to the following table.

host operating system
(Microsoft Windows )

device driver folder

automatic/online
installation/update

2000

MS-Windows-2000.recommended

not available

XP

MS-Windows-XP.recommended

not available

Vista

MS-Windows-Vista+7

not available

7

MS-Windows-Vista+7

available

8

MS-Windows-Vista+7

available

Reccommended device driver folder depending on operating system.

Trenz Electronic device drivers are derived from the original Cypress generic USB device drivers, distributed with the Cypress SuiteUSB 3.4 (or later).
Driver installation on Microsoft Window 7 and Microsoft Window 8 can be performed automatically (on-line). It can happen that the first online driver installation attempt fails; in this case the user shall just force a retry (the second attempt normally works!). See section 2.1.2.3.2 Force the online search of USB Drivers Installation - User Manual.

Coexistence of Generation 2 and Generation 3 device drivers

Installation of both device drivers on the same host computer is normally possible.
Installation of both device drivers on the same host is not recommended under Microsoft Widows XP.
Please read USB Drivers Installation - User Manual (UM-drivers-TE_USB_FX2.pdf) for further details.

Cypress Generic USB driver: used in recovery boot for both Generation 2 and Generation 3

Device driver files

Documentation

Description

The driver package contains many folders. During installation, the user shall specify the folder according to the following table.

Device driver: original Cypress generic USB device drivers, distributed with the Cypress SuiteUSB 3.4 (or later).

host operating system
(Microsoft Windows )

device driver folder

automatic/online
installation/update

2000

MS-Windows-2000.recommended

not available

XP

MS-Windows-XP.recommended

not available

Vista

MS-Windows-Vista+7

not available

7

MS-Windows-Vista+7

available but it is another driver (1)

8

MS-Windows-Vista+7

available but it is another driver (1)

Reccommended device driver folder depending on operating system.

(1) Driver installation on Microsoft Window 7 and Microsoft Window 8 can be performed automatically (on-line). It can happen that the first online driver installation attempt fails; in this case the user shall just force a retry (the second attempt normally works!).  The driver installed is NOT the Cypress generic USB device drivers (distributed with the Cypress SuiteUSB 3.4). but one of this two signed Cypress driver (they can be downloaded from Microsoft Update Catalog):

  • Cypress - Other hardware - Cypress USB Generic Driver (3.4.7.000) for BI15xx where xx is 00,11,12,14, 32
  • Cypress - Bus Controllers and Ports - ND-tech USB Adapter (Cypress USB Generic Driver, version 3.4.1.20) (link)

The second driver could be used but it is not recommended because two PIDs are possible.

Same VID and two different PIDs are possible (written in the corresponding .inf file):

  • Cypress VID (0x04B4) and PID (0x8613) (are typically shown)

  • Cypress VID (0x04B4) and ND-tech PID (0x1004) (it is shown if the board is disconnected and reconnected without power cycle after the firmware download onto EEPROM: this procedure is not correct)

  • No labels