|Company||Trenz Electronic GmbH|
|Title||TE0713-02 DDR3 |
(2021-01-19), Revised 2021-03-09
This change affects all Trenz Electronic TE0713 SoMs of revision 02: TE0713-02-*
#1 Change DDR3 RAM (U15, U19) from IM4G16D3FABG-125I to IS43TR16256BL-125KBLI
Type: BOM change
Reason: Component is end of life.
Impact: New DDR timings may be considered in designs. DDR3 setup used in reference design is known to work still.
Replaced Flash (U4) from S25FL256SAGBHI20 to IS25LP512M-RHLE Type: BOM change Reason: Ensure long time availability. Impact: Jedec Manufacturer ID changed from 01h to 9Dh, the device ID from 18h to 19h. 512Mbit flash are now available.
Type: No change
Reason: The planned IS25LP512M-RHLE is listed as 'Supported Flash Memory Devices for Artix-7 Device Configuration' in Xilinx UG908 (since version 2019.1), but there are unsolved problems with reboot after petalinux was started. Therefore this change is canceled.
Impact: Nothing is changed, Jedec Manufacturer ID is 01h, the device ID 0219h. Size does not change, 256 Mbit flash are available.
#3 Set S/N to not fitted
Type: BOM change
Reason: Part is end of life.
Impact: Track it pad no more available.
Method of Identification
Locate DDR3 RAM (U15 top, U19 bottom) on PCB:
Production Shipment Schedule
From end of Juli 2021, after old stock is gone.
If you have any questions related to this PCN, please contact Trenz Electronics Technical Support at
- support%trenz-electronic.de (subject = PCN-20210119a)
national calls: 05741 3200-0
international calls: +49 5741 3200-0
Any projected dates in this PCN are based on the most current product information at the time this PCN is being issued, but they may change due to unforeseen circumstances. For the latest schedule and any other information, please contact your local Trenz Electronic sales office, technical support or local distributor.