You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Table of contents

Overview

NIOS II Design with SDRAM Controller and 4 different LED sequences, that can be toggled using the user button.

Refer to http://trenz.org/tei0015-info for the current online version of this manual and other available documentation.

Key Features

  • Quartus 18.1
  • NIOS II
  • SPI
  • UART
  • ADC
  • User Flash memory
  • SDRAM memory
  • User LEDs
  • User buttons

Revision History

DateQuartusProject BuiltAuthorsDescription
2019-04-0318.1TEI0015-01-08-C8A-test_board-quartus_18.1-20190403.zipThomas Dück
  • initial release
Design Revision History

Release Notes and Know Issues

IssuesDescriptionWorkaroundTo be fixed version
No known issues---------
Known Issues

Requirements

Software

SoftwareVersionNote
Quartus18.1needed
Software

Hardware

Design supports following modules:

Module ModelPCB Revision SupportSDRAMQSPI FlashOthersNotes
TEI0015-01-08-C8AREV018 MByte64 MBitNANA
Hardware Modules

Design supports following carriers:

Carrier ModelNotes
---
Hardware Carrier

Additional HW Requirements:

Additional HardwareNotes
USB Cable for JTAG/UARTCheck Carrier Board and Programmer for correct type
Additional Hardware

Download

Reference Design is only usable with the specified Quartus version. Do never use different Versions of Quartus Software for the same Project.

Reference Design is available on:

Design Flow

  1. Open file "test_board.quar"
  2. Select Tools → Platform Designer  from Quartus menu
  3. Open file "NIOS_test_board.qsys" in Platform Designer
  4. Open the component "onchip_flash" (double-click)
    1. Enable "Initialize flash content" and "Enable non-default initialization file" at Flash Initialization, if disabled
    2. Specify Path for "User created hex or mif file". You can find the file at \software\test_board\mem_init\onchip_flash.hex
  5. Select Generate → Generate HDL... from the Platform Designer menu

  6. The Generation window will appear

    1. Select "VHDL" as the synthesis language and "None" from the simulation model dropdown menu

    2. Select “Create block symbol file(.bsf)”, if not selected

    3.  Click Generate and close Platform Designer
  7. Select Processing → Start Compilation from the Quartus menu to compile the Design

Launch

Programming

MAX10 Flash

  1. Connect the Board to USB-Port
  2. Open Quartus Programmer from Tools → Programmer
  3. If the Arrow-USB-Blaster is not visible:
    1. Click "Hardware Setup..."
    2. Choose at the drop-down menu "Currently selected hardware" the Arrow-USB-Blaster[USB0]
    3. Close "Hardware Setup"
  4. If the correct configuration file is not set:
    1. Delete other files
    2. Click "Add file..."
    3. select the correct *.pof file (Path: <project_directory>\output_files\test_board.pof)
  5. Click start

Usage

  1. Prepare Hardware like described on section TEI0015 Test Board
  2. Connect UART USB (most cases same as JTAG)

UART

  1. Open Serial Console "PuTTY"
  2. Change settings in category "Session"
    1. Connection Type: Serial
    2. COM Port: see device manager (Win OS)
    3. Speed: 115200
  3. Select "Implicit CR in every LF" in category "Terminal"
  4. Click Open
  5. Press reset button at module
    1. Flash test is running
  6. After the  flash test finished, you can toggle between following LED sequences by pressing user button
    1. Case statement sequence
    2. Shift register sequence
    3. Knightrider sequence
    4. Pulse-width modulation sequence

Appx. A: Change History and Legal Notices

Document Change History

To get content of older revision  got to "Change History"  of this page and select older document revision number.

DateDocument Revision

Authors

Description

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy244.$Proxy3589#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy244.$Proxy3589#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy244.$Proxy3589#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

  • Initial release
--


all

Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy244.$Proxy3589#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

--
Document change history.

Legal Notices

Data Privacy

Please also note our data protection declaration at https://www.trenz-electronic.de/en/Data-protection-Privacy

Document Warranty

The material contained in this document is provided “as is” and is subject to being changed at any time without notice. Trenz Electronic does not warrant the accuracy and completeness of the materials in this document. Further, to the maximum extent permitted by applicable law, Trenz Electronic disclaims all warranties, either express or implied, with regard to this document and any information contained herein, including but not limited to the implied warranties of merchantability, fitness for a particular purpose or non infringement of intellectual property. Trenz Electronic shall not be liable for errors or for incidental or consequential damages in connection with the furnishing, use, or performance of this document or of any information contained herein.

Limitation of Liability

In no event will Trenz Electronic, its suppliers, or other third parties mentioned in this document be liable for any damages whatsoever (including, without limitation, those resulting from lost profits, lost data or business interruption) arising out of the use, inability to use, or the results of use of this document, any documents linked to this document, or the materials or information contained at any or all such documents. If your use of the materials or information from this document results in the need for servicing, repair or correction of equipment or data, you assume all costs thereof.

Copyright Notice

No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Trenz Electronic.

Technology Licenses

The hardware / firmware / software described in this document are furnished under a license and may be used /modified / copied only in accordance with the terms of such license.

Environmental Protection

To confront directly with the responsibility toward the environment, the global community and eventually also oneself. Such a resolution should be integral part not only of everybody's life. Also enterprises shall be conscious of their social responsibility and contribute to the preservation of our common living space. That is why Trenz Electronic invests in the protection of our Environment.

REACH, RoHS and WEEE

REACH

Trenz Electronic is a manufacturer and a distributor of electronic products. It is therefore a so called downstream user in the sense of REACH. The products we supply to you are solely non-chemical products (goods). Moreover and under normal and reasonably foreseeable circumstances of application, the goods supplied to you shall not release any substance. For that, Trenz Electronic is obliged to neither register nor to provide safety data sheet. According to present knowledge and to best of our knowledge, no SVHC (Substances of Very High Concern) on the Candidate List are contained in our products. Furthermore, we will immediately and unsolicited inform our customers in compliance with REACH - Article 33 if any substance present in our goods (above a concentration of 0,1 % weight by weight) will be classified as SVHC by the European Chemicals Agency (ECHA).

RoHS

Trenz Electronic GmbH herewith declares that all its products are developed, manufactured and distributed RoHS compliant.

WEEE

Information for users within the European Union in accordance with Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE).

Users of electrical and electronic equipment in private households are required not to dispose of waste electrical and electronic equipment as unsorted municipal waste and to collect such waste electrical and electronic equipment separately. By the 13 August 2005, Member States shall have ensured that systems are set up allowing final holders and distributors to return waste electrical and electronic equipment at least free of charge. Member States shall ensure the availability and accessibility of the necessary collection facilities. Separate collection is the precondition to ensure specific treatment and recycling of waste electrical and electronic equipment and is necessary to achieve the chosen level of protection of human health and the environment in the European Union. Consumers have to actively contribute to the success of such collection and the return of waste electrical and electronic equipment. Presence of hazardous substances in electrical and electronic equipment results in potential effects on the environment and human health. The symbol consisting of the crossed-out wheeled bin indicates separate collection for waste electrical and electronic equipment.

Trenz Electronic is registered under WEEE-Reg.-Nr. DE97922676.


Error rendering macro 'page-info'

Ambiguous method overloading for method jdk.proxy244.$Proxy3589#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]



  • No labels