Download PDF version of this document.
Company | Trenz Electronic GmbH |
---|---|
PCN Number | PCN-20211018 |
Title | TE0741-03 to TE0741-04 Hardware Revision Change |
Subject | Hardware Revision Change |
Issue Date | 202 |
Products Affected
This change affects all Trenz Electronic TE0741 SoMs of revision 03:
Affected Product | Replacement |
---|---|
TE0741-03-070-2CF | TE0741-04-A2C-1-A |
TE0741-03-070-2IF | TE0741-04-A2I-1-A |
TE0741-03-160-2C1 | TE0741-04-B2C-1-AF |
TE0741-03-160-2CF | TE0741-04-B2C-1-A |
TE0741-03-160-2IF | TE0741-04-B2I-1-A |
TE0741-03-325-2CF | TE0741-04-D2C-1-A |
TE0741-03-325-2IF | TE0741-04-D2I-1-A |
TE0741-03-410-2CF | TE0741-04-G2C-1-A |
TE0741-03-410-2IF | TE0741-04-G2I-1-A |
TE0741-03-B3E-1-AF | TE0741-04-B3E-1-AF |
S00014 | TE0741-04-S002C1 |
Changes
#1 Replaced EN63A0QI (U14, U15) LTM4638EY#PBF
Type: Schematic change
Reason: Enpirion DCDCs are discontinued.
Impact: None. Maximum continuous output current increased from 12A to 15A per DCDC.
#2 Replaced EP53F8QI (U6, U8, U16) by TPS82085SIL
Type: Schematic change
Reason: Enpirion DCDCs are discontinued.
Impact: None. Maximum continuous output current of DCDC increased from 1.5A to 3A on each rail.
#3 Replaced TPS27082LDDCR (Q1) by TPS27081ADDCR
Type: Schematic change
Reason: Part is EOL.
Impact: None.
#4 Signal trace lengths changed
Type: PCB change
Reason: Result of changes above.
Impact: Changed trace length have to be taken into account in existing designs. The trace length for new revision are added to the 4x5 series pinout generator. Please check if change in tracelength still matches your requirements. Redesign of carrier may be necessary.
#5 Added resistor R41 and DNP R40
Type: Schematic change
Reason: Add customization option for external sourcing of VBAT.
Impact: External sourcing of VBAT possible when R40 installed and R41 not installed.
#6 S/N removed
Type: BOM change
Reason: Part is end of life.
Impact: Track it pad no more available.
#7 PCB revision bits updated
Type: Schematic change
Reason: PCB revision changed.
Impact: REV_ID2..0 pins are connected to contain the value for REV04. They changed from "011" to "100".
#8 Full update LIB
Type: Sch/PCB Change
Reason: Improve production yield.
Impact: None.
Method of Identification
The revision number is printed on the PCB, revision 03 on bottom, revision 04 on top side.
Production Shipment Schedule
The new revision 04 will be shipped from Juli 2022, after old stock is gone.
Contact Information
If you have any questions related to this PCN, please contact Trenz Electronics Technical Support at
- forum.trenz-electronic.de
- wiki.trenz-electronic.de
- support%trenz-electronic.de (subject = PCN-20211018)
phone
national calls: 05741 3200-0
international calls: +49 5741 3200-0
Disclaimer
Any projected dates in this PCN are based on the most current product information at the time this PCN is being issued, but they may change due to unforeseen circumstances. For the latest schedule and any other information, please contact your local Trenz Electronic sales office, technical support or local distributor.
This PCN follows JEDEC Standard J-STD-046.