5.2 x 7.6 Carriers

Table of Content

Legend

• : Attention: Carrier/Module combination only with special condition or PCB modification possible
• : Supported
• : Supported with limitations
• : Not Supported
• : Table currently not complete, see TRM of module and carrier

TEBF0818 - Carrier for UltraSoM+ (4x ADF B2B)

	JTAG/UART (XMOD1)	JTAG (XMOD2)(1)	SD	microSD	SATA	USB Host	ETH	PCIe	Display Port	FMC	SFP+	FireFly	PMOD	CAN(2)	PJTAG(2)	Coax in	Coax out	VBAT
TE0813 - UltraSoM+										(3)
TE0817 - UltraSoM+
TE0818 - UltraSoM+

• (1) CPLD JTAG or FMC JTAG, depending on DIP settings
• (2) Depends on CPLD Firmware
• (3) High Speed Lanes depends on assembly option: 4 GTH only with ZU4 or bigger, also high speed FMC clocks (GBTCLK) are not accessible with TE0813

TEBF0808 - Carrier for UltraSoM+ (4x SS5 B2B)

	JTAG/UART (XMOD1)	JTAG (XMOD2)(1)	SD	microSD	SATA	USB Host	ETH	PCIe	Display Port	FMC	SFP+	FireFly	PMOD	CAN(2)	PJTAG(2)	Coax in	Coax out	VBAT
TE0803 - UltraSoM+										(3)
TE0807 - UltraSoM+
TE0808 - UltraSoM+

• (1) CPLD JTAG or FMC JTAG, depending on DIP settings
• (2) Depends on CPLD Firmware
• (3) High Speed Lanes depends on assembly option: 4 GTH only with ZU4 or bigger, also high speed FMC clocks (GBTCLK) are not accessible with TE0803

TEBT0808 Test Fixture - Carrier for UltraSoM+ (4x SS5 B2B)

	Coax	JTAG/UART(XMOD)	PJTAG	I2C Pin Header (Module PLL access)
TE0803 - UltraSoM+	(1)
TE0807 - UltraSoM+
TE0808 - UltraSoM+

• (1) Only one PS GTR, PL GTH which are available with ZU4 or bigger are looped back.

TEB0745 - 3x SS5 B2B

• (1) quantity depends on SoC Size: XC7Z030 has only 4 MGTs

TEB0729 - 2x BSE B2B

	USB	ETH (3x)	micro SD	USB (JTAG/UART)
TE0729