DDR less ZYNQ Design

This is preliminary based on Vivado 2015.4 release, the "DDR Less" flow should become even easier with the next Vivado releases.

Step by Step

In Vivado IPI create a BD and configure PS7 block with no DDR, one UART should be enabled also
in SDK create FSBL, in main.c add one line, and comment out one line:

#define XPAR_PS7_DDR_0_S_AXI_BASEADDR 0
#ifdef XPAR_PS7_DDR_0_S_AXI_BASEADDR
//Status = DDRInitCheck();

Create BOOT.BIN

Thats all, PS will load the FPGA bitstream and then do nothing.

Do not add "hello.elf" as application to the BOOT.BIN, it would yield in non bootable boot image