You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

CompanyTrenz Electronic GmbH
PCN NumberPCN-20240124
TitleTE0600-03 to TE0600-04 Hardware Revision Change
SubjectHardware Revision Change
Issue Date

2024-02-01

Products Affected

This change affects all Trenz Electronic TE0600 SoMs: TE0600-03*.

Affected Product

Replacement
TE0600-03-72C11-ATE0600-04-72C11-A
TE0600-03-72C21-ATE0600-04-72C21-A
TE0600-03-52I11-ATE0600-04-52I11-A
TE0600-03-83I21-ATE0600-04-83I21-A
TE0600-03-52I11-MTE0600-04-52I11-M
TE0600-03-83I11-ATE0600-04-83I11-A
TE0600-03-83C21-A (???)TE0600-04-83C21-A
TE0600-03-52I11-W (nicht produziert) ???EOL
TE0600-03-52I11-C (nicht produziert, müsste S-Variante sein) ???EOL
TE0600-03IC ???


Note ED: 3) U9 was changed from SiT8008AI to SiT8008BI (ED: not changed for replacement variants)

Changes

#2 Changed DCDC EN6347QI (U2) to MPM3860GQW-Z and adapted power circuit.

Type: Schematic Change

Reason: EOL of Component.

Impact: None. Increased current output capability. Minor changes in electrical characteristics.

#2 Changed DCDC EP53F8QI (U3) to MPM3834CGPA and adapted power circuit.

Type: Schematic Change

Reason: EOL of Component

Impact: None. Minor changes in electrical characteristics.

#2 Changed LDO LP3878SD-ADJ (U4, U14) to TPS74601PBDRVT and adapted power circuit.

Type: Schematic Change

Reason: EOL of Component

Impact: None. Increased current output capability. Minor changes in electrical characteristics.

#1 Assembled clock SiT8008BI-73-XXS-100.000000E (U12).

Type: BOM Change

Reason: ???

Impact: ???

#1 Inserted internal pull-up IO resistor option for FPGA via external resistor (R83).

Type: Schematic Change

Reason: Improvement.

Impact: None. Default is as previous revision.

#1 Improve led (D1) driving circuit via adding MOSFET (T1) and resistor (R84) and changed 120 Ohm resistor (R36) to 240 Ohm.

Type: Schematic Change

Reason: Improve led circuit.

Impact: None.

#1 Changed 2.2 kOhm resistor (R29) to 100 Ohm.

Type: BOM Change

Reason: Follow AMD recommendation.

Impact: None.

#1 Changed leds (D1, D5) from 150060VS75000 to SML-P11MTT86.

Type: Schematic Change

Reason: BOM optimization.

Impact: None.

#1 Changed diode (D3) from BAT54VV,115 to two separated diodes (D2, D3) BAT54A,215.

Type: Schematic Change

Reason: BOM optimization.

Impact: None.

#1 Changed 2.2 kOhm resistors (R56, R57, R58) to 2.4 kOhm.

Type: BOM Change

Reason: Follow AMD recommendation.

Impact: None.

#1 Pulled-down board revision signal (FPGA U5, pin P17) and updated board revision documentation.

Type: Schematic Change

Reason: Update revision information.

Impact: None. Firmware reflects it but custom firmware needs to be updated by customer.

#11 Added testpoints (TP11...TP14, TP23...TP28).

Type: PCB Change

Reason: Improve voltage monitoring.

Impact: None.

#1 Changed stacked vias to staggered vias.

Type: PCB Change

Reason: Reliability improvement.

Impact: Reliablity improvement.

#20 Signal trace lengths changed

Type: PCB change

Reason: Result of changes above.

Impact: Changed trace length have to be taken into account in existing designs.

#17 Updated B2B documentation.

Type: Documentation Update

Reason: Documentation improvement.

Impact: None.

#17 Renamed document sheets.

Type: Documentation Update

Reason: Documentation improvement.

Impact: None.

#20 Updated legal notices, revision history, block and power diagram. Updated page count and order. 

Type: Documentation Update

Reason: Documentation improvement.

Impact: None.

Method of Identification



Production Shipment Schedule

From XXXXX, after old stock is gone. If the new revision is not suitable for your application and still the former revision of the board is needed, please contact us.


Contact Information

If you have any questions related to this PCN, please contact Trenz Electronics Technical Support at

Disclaimer

Any projected dates in this PCN are based on the most current product information at the time this PCN is being issued, but they may change due to unforeseen circumstances.  For the latest schedule and any other information, please contact your local Trenz Electronic sales office, technical support or local distributor.

This PCN follows JEDEC Standard J-STD-046.

  • No labels