- Created by Waldemar Hanemann on 05 04, 2024
You are viewing an old version of this page. View the current version.
Compare with Current View Page History
Version 1 Next »
Overview
Refer to http://trenz.org/teg2000-info for the current online version of this manual and other available documentation.
Key Features
- USB(JTAG/UART)
- LED
Revision History
| Date | Vivado | Project Built | Authors | Description |
|---|---|---|---|---|
| Waldemar Hanemann |
|
Design Revision History
Release Notes and Know Issues
| Issues | Description | Workaround | To be fixed version |
|---|---|---|---|
| No known issues | --- | --- | --- |
Known Issues
Requirements
Software
| Software | Version | Note |
|---|---|---|
| Yosys | -- | needed for RTL Synthesis |
| GateMate EasyConvert Place&Route | -- | needed for implementation and Bitstream generation |
| openFPGALoader | -- | needed for loading bitstream into FPGA |
Software
Hardware
Design supports following modules:
| Module Model | Board Part Short Name | PCB Revision Support | DDR | QSPI Flash | EMMC | Others | Notes |
|---|---|---|---|---|---|---|---|
| TEG2000-01-P001 | -- | REV01 | -- | 16MB | -- |
*used as reference
Hardware Modules
Design supports following carriers:
| Carrier Model | Notes |
|---|---|
| TE0703* | We only support TE0703. |
*used as reference
Hardware Carrier
Additional HW Requirements:
| Additional Hardware | Notes |
|---|---|
*used as reference
Additional Hardware
Content
For general structure and usage of the reference design, see Project Delivery - AMD devices
Design Sources
| Type | Location | Notes |
|---|---|---|
Design sources
Additional Sources
| Type | Location | Notes |
|---|---|---|
Additional design sources
Prebuilt
File | File-Extension | Description |
|---|---|---|
| BIT-File | *.bit | FPGA (PL Part) Configuration File |
| .cfg | ???? |
Prebuilt files (only on ZIP with prebuilt content)
Download
Reference Design is available on:
Design Flow
It's recommended to use TE prebuilt files for first launch.
→ HOW TO OPEN PROJECT and PROGRAM ←
Launch
Programming
Check Module and Carrier TRMs for proper HW configuration before you try any design.
Reference Design is also available with prebuilt files. It's recommended to use TE prebuilt files for first launch.
Get prebuilt boot binaries
QSPI-Boot mode
JTAG
Not used on this example.
Usage
- Prepare HW like described on section Programming
- Connect UART USB (most cases same as JTAG)
Select SD Card as Boot Mode (or QSPI - depending on step 1)
Note: See TRM of the Carrier, which is used.
Power On PCB
System Design - Vivado
Constraints
Basic module constraints
MF8A18_SoC.ccf
## blink.ccf
#
# Date: 2022-10-21
#
# Format:
# <pin-direction> "<pin-name>" Loc = "<pin-location>" | <opt.-constraints>;
#
# Additional constraints can be appended using the pipe symbol.
# Files are read line by line. Text after the hash symbol is ignored.
#
# Available pin directions:
#
# Pin_in
# defines an input pin
# Pin_out
# defines an output pin
# Pin_inout
# defines a bidirectional pin
#
# Available pin constraints:
#
# SCHMITT_TRIGGER={true,false}
# enables or disables schmitt trigger (hysteresis) option
# PULLUP={true,false}
# enables or disables I/O pullup resistor of nominal 50kOhm
# PULLDOWN={true,false}
# enables or disables I/O pulldown resistor of nominal 50kOhm
# KEEPER={true,false}
# enables or disables I/O keeper option
# SLEW={slow,fast}
# sets slew rate to slow or fast
# DRIVE={3,6,9,12}
# sets output drive strength to 3mA..12mA
# DELAY_OBF={0..15}
# adds an additional delay of n * nominal 50ps to output signal
# DELAY_IBF={0..15}
# adds an additional delay of n * nominal 50ps to input signal
# FF_IBF={true,false}
# enables or disables placing of FF in input buffer, if possible
# FF_OBF={true,false}
# enables or disables placing of FF in output buffer, if possible
# LVDS_BOOST={true,false}
# enables increased LVDS output current of 6.4mA (default: 3.2mA)
# LVDS_TERM={true,false}
# enables on-chip LVDS termination resistor of nominal 100Ohm, in output mode only
#
# Global IO constraints can be set with the default_GPIO statement. It can be
# overwritten by individual settings for specific GPIOs, e.g.:
# default_GPIO | DRIVE=3; # sets all output strengths to 3mA, unless overwritten
#
Pin_in "clk" Loc = "IO_SB_A8" | SCHMITT_TRIGGER=true;
Pin_out "UART_TXD" Loc = "IO_SB_A4"; # MIO15
Pin_out "led" Loc = "IO_SB_B4"; # one board LED
#Pin_in "resetn" Loc = "IO_EA_B2"; # TEB0707 user button active high!
#Pin_in "resetn" Loc = "IO_SB_B6"; # permanent 1
#Pin_in "resetn" Loc = "IO_SB_B5"; # permanent 0
Additional Software
No additional software is needed.
App. A: Change History and Legal Notices
Document Change History
To get content of older revision go to "Change History" of this page and select older document revision number.
| Date | Document Revision | Authors | Description |
|---|---|---|---|
Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy241.$Proxy3497#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] | Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy241.$Proxy3497#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] | Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy241.$Proxy3497#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] |
|
| -- | all | Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy241.$Proxy3497#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] | -- |
Document change history.
Legal Notices
Data Privacy
Please also note our data protection declaration at https://www.trenz-electronic.de/en/Data-protection-Privacy
Document Warranty
The material contained in this document is provided “as is” and is subject to being changed at any time without notice. Trenz Electronic does not warrant the accuracy and completeness of the materials in this document. Further, to the maximum extent permitted by applicable law, Trenz Electronic disclaims all warranties, either express or implied, with regard to this document and any information contained herein, including but not limited to the implied warranties of merchantability, fitness for a particular purpose or non infringement of intellectual property. Trenz Electronic shall not be liable for errors or for incidental or consequential damages in connection with the furnishing, use, or performance of this document or of any information contained herein.
Limitation of Liability
In no event will Trenz Electronic, its suppliers, or other third parties mentioned in this document be liable for any damages whatsoever (including, without limitation, those resulting from lost profits, lost data or business interruption) arising out of the use, inability to use, or the results of use of this document, any documents linked to this document, or the materials or information contained at any or all such documents. If your use of the materials or information from this document results in the need for servicing, repair or correction of equipment or data, you assume all costs thereof.
Copyright Notice
No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Trenz Electronic.
Technology Licenses
The hardware / firmware / software described in this document are furnished under a license and may be used /modified / copied only in accordance with the terms of such license.
Environmental Protection
To confront directly with the responsibility toward the environment, the global community and eventually also oneself. Such a resolution should be integral part not only of everybody's life. Also enterprises shall be conscious of their social responsibility and contribute to the preservation of our common living space. That is why Trenz Electronic invests in the protection of our Environment.
REACH, RoHS and WEEE
REACH
Trenz Electronic is a manufacturer and a distributor of electronic products. It is therefore a so called downstream user in the sense of REACH. The products we supply to you are solely non-chemical products (goods). Moreover and under normal and reasonably foreseeable circumstances of application, the goods supplied to you shall not release any substance. For that, Trenz Electronic is obliged to neither register nor to provide safety data sheet. According to present knowledge and to best of our knowledge, no SVHC (Substances of Very High Concern) on the Candidate List are contained in our products. Furthermore, we will immediately and unsolicited inform our customers in compliance with REACH - Article 33 if any substance present in our goods (above a concentration of 0,1 % weight by weight) will be classified as SVHC by the European Chemicals Agency (ECHA).
RoHS
Trenz Electronic GmbH herewith declares that all its products are developed, manufactured and distributed RoHS compliant.
WEEE
Information for users within the European Union in accordance with Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE).
Users of electrical and electronic equipment in private households are required not to dispose of waste electrical and electronic equipment as unsorted municipal waste and to collect such waste electrical and electronic equipment separately. By the 13 August 2005, Member States shall have ensured that systems are set up allowing final holders and distributors to return waste electrical and electronic equipment at least free of charge. Member States shall ensure the availability and accessibility of the necessary collection facilities. Separate collection is the precondition to ensure specific treatment and recycling of waste electrical and electronic equipment and is necessary to achieve the chosen level of protection of human health and the environment in the European Union. Consumers have to actively contribute to the success of such collection and the return of waste electrical and electronic equipment. Presence of hazardous substances in electrical and electronic equipment results in potential effects on the environment and human health. The symbol consisting of the crossed-out wheeled bin indicates separate collection for waste electrical and electronic equipment.
Trenz Electronic is registered under WEEE-Reg.-Nr. DE97922676.
Error rendering macro 'page-info'
Ambiguous method overloading for method jdk.proxy241.$Proxy3497#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]
Table of contents
- No labels
Overview
Content Tools