Company | Trenz Electronic GmbH |
---|---|
PCN Number | PCN-20240619 |
Title | TE0715-05 SI5338 Change |
Subject | OTP Change |
Issue Date | 2024-07-22 |
Products Affected
This change affects all Trenz Electronic TE0715-05 with a serial number greater than 886100.
Changes
#1 SI5338 OTP content update
Changes:
- New ClockBuilder Pro version (4.10) is used. This leads to parameter change # FDBK Mux = NoClk instead of # FDBK Mux = RefClk.
- Enable optional FPGA Fabric clock CLK2 125 MHz with LVDS18.
- Enable optional FPGA Fabric clock CLK3A 50 MHz with CMOS18.
Set I2C voltage to 2.5V/3.3V instead of 1.8V
Type: Firmware Change
Reason: Improved PLL settings.
Impact: Additional clock is available on Bank 34 IO_L9N, Pin K2.
Method of Identification
The model code and revision number (TE0715-05) are printed on the top side of the PCB. The serial number is written at the QR-code on the top side label.
Production Shipment Schedule
With immediate effect this change takes place. If the changed product is not suitable for your application and still the former product of the board is needed, please contact us.
Contact Information
If you have any questions related to this PCN, please contact Trenz Electronics Technical Support at
- forum.trenz-electronic.de
- wiki.trenz-electronic.de
- support%trenz-electronic.de (subject = PCN-20240619)
phone
national calls: 05741 3200-0
international calls: 0049 5741 3200-0
Disclaimer
Any projected dates in this PCN are based on the most current product information at the time this PCN is being issued, but they may change due to unforeseen circumstances. For the latest schedule and any other information, please contact your local Trenz Electronic sales office, technical support or local distributor.
This PCN follows JEDEC Standard J-STD-046.