TE0720 HDMI701

Overview

Zynq PS Design with Linux for TE0701 with HDMI support.

Refer to http://trenz.org/te0720-info for the current online version of this manual and other available documentation.

Key Features

• Vitis/Vivado 2019.2
• PetaLinux/Ubuntu/Debian
• SD
• ETH (use EEPROM MAC)
• USB
• I2C
• RTC
• VIO PHY LED
• HDMI
• FSBL for EEPROM MAC and CPLD access and  HDMI DMA
• Special FSBL for QSPI Programming
• TE0701 (only supported)

Revision History

Release Notes and Know Issues

Requirements

Software

Hardware

Basic description of TE Board Part Files is available on TE Board Part Files.

Complete List is available on <design name>/board_files/*_board_files.csv

Design supports following modules:

Design supports following carriers:

Additional HW Requirements:

Content

For general structure and of the reference design, see Project Delivery - AMD devices

Design Sources

Additional Sources

Prebuilt

Download

Reference Design is only usable with the specified Vivado/SDK/PetaLinux/SDx version. Do never use different Versions of Xilinx Software for the same Project.

Reference Design is available on:

• TE0720 "HDMI701" Reference Design Download Area

Design Flow

Trenz Electronic provides a tcl based built environment based on Xilinx Design Flow.

See also:

• AMD Development Tools#XilinxSoftware-BasicUserGuides
• Vivado Projects - TE Reference Design
•  Project Delivery.

The Trenz Electronic FPGA Reference Designs are TCL-script based project. Command files for execution will be generated with "_create_win_setup.cmd" on Windows OS and "_create_linux_setup.sh" on Linux OS.

TE Scripts are only needed to generate the vivado project, all other additional steps are optional and can also executed by Xilinx Vivado/SDK GUI.  For currently Scripts limitations on Win and Linux OS see: Project Delivery Currently limitations of functionality

1. _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell:
   
2. Press 0 and enter for minimum setup
3. (optional Win OS) Generate Virtual Drive or use short directory  for the reference design (for example x:\<design name>)
4. Create Project
   
   1. Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd"
      Note: Select correct one, see TE Board Part Files
5. Create XSA and export to prebuilt folder
   
   1. Run on Vivado TCL: TE::hw_build_design -export_prebuilt
      Note: Script generate design and export files into \prebuilt\hardware\<short dir>. Use GUI is the same, except file export to prebuilt folder
6. Create Linux (uboot.elf and image.ub) with exported XSA
   
   1. XSA is exported to "prebuilt\hardware\<short name>"
      Note: HW Export from Vivado GUI create another path as default workspace.
   2. Create Linux images on VM, see PetaLinux KICKstart
      1. Use TE Template from /os/petalinux
   3. Build the Debian image/Ubuntu image file with executing the "mkdebian_stretch.sh"/"mkubuntu_BionicBeaver.sh" file in Linux Terminal
7. Add Linux files (uboot.elf and image.ub) to prebuilt folder
   
   1. "prebuilt\os\petalinux\<ddr size>" or "prebuilt\os\petalinux\<short name>"
8. Generate Programming Files with Vitis
   
   1. Run on Vivado TCL: TE::sw_run_vitis -all
      Note: Scripts generate applications and bootable files, which are defined in "sw_lib\apps_list.csv"
   2. (alternative) Start SDK with Vivado GUI or start with TE Scripts on Vivado TCL: TE::sw_run_vitis
      Note:  TCL scripts generate also platform project, this must be done manuelly in case GUI is used. See Vitis

Launch

Programming

Xilinx documentation for programming and debugging: Vivado/SDK/SDSoC-Xilinx Software Programming and Debugging

Get prebuilt boot binaries

1. _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell
2. Press 0 and enter to start "Module Selection Guide"
   1. Select assembly version
   2. Validate selection
   3. Select Create and open delivery binary folder
      Note: Folder (<project folder>/_binaries_<Articel Name>) with subfolder (boot_linux)

QSPI

Not used on this Example.

SD

1. Format the SD Card with SD Card Formatter or other tool
2. Write the Debian image or Ubuntu image file on SD Card with Win32DiskImager
3. Copy Petalinux  image.ub and Boot.bin on SD-Card.
   • use files from (<project foler>/_binaries_<Articel Name>)/boot_linux from generated binary folder,see: Get prebuilt boot binaries
   • or use prebuilt file location, see <design_name>/prebuilt/readme_file_location.txt
4. Set Boot Mode to SD-Boot.
   • Depends on Carrier, see carrier TRM.
5. Insert SD-Card in SD-Slot.

JTAG

Not used on this Example.

Usage

1. Prepare HW like described on section 46040563
2. Connect UART USB (most cases same as JTAG)
3. Select SD Card as Boot Mode
   Note: On TE0701 Default  Firmware Boot Mode is selected via SD card (insered SD Card for SD Boot Mode)
4. Connect HDMI to Monitor
5. Connect USB Adapter with Hub and Mouse+Keyboard
6. Power On PCB
   Note: 1. Zynq Boot ROM loads FSBL from SD into OCM, 2. FSBL loads U-boot from SD into DDR, 3. U-boot load Linux from SD into DDR

Linux

1. Open Serial Console (e.g. putty)
   
   1. Speed: 115200
   2. COM Port: Win OS, see device manager, Linux OS see  dmesg |grep tty  (UART is *USB1)
2. Linux Console:
   Note: Wait until Linux boot finished For Linux Login use:
   
   1. User Name: root
   2. Password: root
3. You can use Linux shell now.
   1. I2C 0 Bus type: i2cdetect -y -r 0
   2. I2C 1 Bus type: i2cdetect -y -r 1
   3. RTC check: dmesg | grep rtc
   4. ETH0 works with udhcpc
   5. USB: insert USB device
4. Debian Desktop
   1. Debian Desktop will be started automatically
   2. Use connected mouse + keyboard for interaction with GUI
   3. Web Browser Dillo open console and type dillo or use browser
   4. open console and start video or audio with "mplayer <video or audio file>"
5. Ubuntu Desktop
   1. Ubuntu Desktop will be started automatically
   2. Use connected mouse + keyboard for interaction with GUI
   3. Web Browser Mozilla firefox can be used.
   4. Audio or Vider file can also be performed directly in GUI.

HDMI Monitor

Second Linux GUI is displayed on HDMI monitor.

Vivado HW Manager 

1. Open Vivado HW-Manager and add VIO signal to dashboard (*.ltx located on prebuilt folder).

2. PHY LED:
   

   
   

System Design - Vivado

Block Design

Block Design

PS Interfaces

Constrains

Basic module constrains

#
# Common BITGEN related settings for TE0720 SoM
#
set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
set_property CONFIG_VOLTAGE 3.3 [current_design]
set_property CFGBVS VCCO [current_design

#
set_property BITSTREAM.CONFIG.UNUSEDPIN PULLUP [current_design]

Design specific constrain

#
# Constraints for System controller support logic
#
set_property PACKAGE_PIN K16 [get_ports PL_pin_K16]
set_property PACKAGE_PIN K19 [get_ports PL_pin_K19]
set_property PACKAGE_PIN K20 [get_ports PL_pin_K20]
set_property PACKAGE_PIN L16 [get_ports PL_pin_L16]
set_property PACKAGE_PIN M15 [get_ports PL_pin_M15]
set_property PACKAGE_PIN N15 [get_ports PL_pin_N15]
set_property PACKAGE_PIN N22 [get_ports PL_pin_N22]
set_property PACKAGE_PIN P16 [get_ports PL_pin_P16]
set_property PACKAGE_PIN P22 [get_ports PL_pin_P22]

#
# If Bank 34 is not 2.5V Powered need change the IOSTANDARD
#
set_property IOSTANDARD LVCMOS25 [get_ports PL_pin*]

#
# TE0701 I2C Bus
#
set_property PACKAGE_PIN W20 [get_ports IIC_0_scl_io]
set_property PACKAGE_PIN W21 [get_ports IIC_0_sda_io]
set_property IOSTANDARD LVCMOS25 [get_ports IIC_0_scl_io]
set_property IOSTANDARD LVCMOS25 [get_ports IIC_0_sda_io]

#
# ADV7511 Interface
#
set_property PACKAGE_PIN N20 [get_ports hdmi_out_clk]
set_property PACKAGE_PIN N19 [get_ports hdmi_out_de]
set_property PACKAGE_PIN R19 [get_ports hdmi_out_hsync]
set_property PACKAGE_PIN T19 [get_ports hdmi_out_vsync]
set_property PACKAGE_PIN T18 [get_ports {hdmi_out_data[0]}]
set_property PACKAGE_PIN R18 [get_ports {hdmi_out_data[1]}]
set_property PACKAGE_PIN R21 [get_ports {hdmi_out_data[2]}]
set_property PACKAGE_PIN R20 [get_ports {hdmi_out_data[3]}]
set_property PACKAGE_PIN M22 [get_ports {hdmi_out_data[4]}]
set_property PACKAGE_PIN K21 [get_ports {hdmi_out_data[5]}]
set_property PACKAGE_PIN M21 [get_ports {hdmi_out_data[6]}]
set_property PACKAGE_PIN J20 [get_ports {hdmi_out_data[7]}]
set_property PACKAGE_PIN T17 [get_ports {hdmi_out_data[8]}]
set_property PACKAGE_PIN J22 [get_ports {hdmi_out_data[9]}]
set_property PACKAGE_PIN T16 [get_ports {hdmi_out_data[10]}]
set_property PACKAGE_PIN J21 [get_ports {hdmi_out_data[11]}]
set_property IOSTANDARD LVCMOS25 [get_ports hdmi_*]

set_property PACKAGE_PIN AB16 [get_ports {cec_clk[0]}]
set_property PACKAGE_PIN AB17 [get_ports {ct_hpd[0]}]
set_property PACKAGE_PIN AA16 [get_ports {ls_oe[0]}]
set_property IOSTANDARD LVCMOS25 [get_ports {cec_clk[0]}]
set_property IOSTANDARD LVCMOS25 [get_ports {ct_hpd[0]}]
set_property IOSTANDARD LVCMOS25 [get_ports {ls_oe[0]}]

Software Design - Vitis

For SDK project creation, follow instructions from:

Vitis

Application

zynq_fsbl

TE modified 2019.2 FSBL

General:

• Modified Files:main.c, fsbl_hooks.h/.c (search for 'TE Mod' on source code)

• Add Files: te_fsbl_hooks.h/.c(for hooks and board)\n\

• General Changes: 
  
  • Display FSBL Banner and Device ID

Module Specific:

• Add Files: all TE Files start with te_*
  
  • READ MAC from EEPROM and make Address accessible by UBOOT (need copy defines on uboot  platform-top.h)
  • CPLD access
  • Read CPLD Firmware and SoC Type
  • Configure Marvell PHY
  • USB PHY Reset
  • Configure LED usage

TE modified 2019.2 FSBL

General:

• Modified Files:main.c, fsbl_hooks.h/.c (search for 'TE Mod' on source code)

• Add Files: te_fsbl_hooks.h/.c(for hooks and board)\n\

• General Changes: 
  
  • Display FSBL Banner and Device ID

Module Specific:

• Add Files: all TE Files start with te_*
  
  • READ MAC from EEPROM and make Address accessible by UBOOT (need copy defines on uboot  platform-top.h)
  • CPLD access
  • Read CPLD Firmware and SoC Type
  • Configure Marvell PHY
  • Configure ADV7511
  • Configure Video Timing Controller core
  • Configure VDMA core and enable transfers

zynq_fsbl_flash

TE modified 2019.2 FSBL

General:

• Modified Files: main.c
• General Changes:
  
  •  Display FSBL Banner
  • Set FSBL Boot Mode to JTAG
  • Disable Memory initialisation

U-Boot

U-Boot.elf is generated with PetaLinux. Vitis is used to generate Boot.bin.

Software Design -  PetaLinux

For PetaLinux installation and  project creation, follow instructions from:

• PetaLinux KICKstart

Config

Start with petalinux-config or petalinux-config --get-hw-description

Select Image Packaging Configuration ==> Root filesystem type ==> Select SD Card

Changes:

• # CONFIG_SUBSYSTEM_ROOTFS_INITRAMFS is not set

• # CONFIG_SUBSYSTEM_ROOTFS_INITRD is not set

• # CONFIG_SUBSYSTEM_ROOTFS_JFFS2 is not set

• # CONFIG_SUBSYSTEM_ROOTFS_NFS is not set

• CONFIG_SUBSYSTEM_ROOTFS_SD=y

• # CONFIG_SUBSYSTEM_ROOTFS_OTHER is not set

U-Boot

Start with petalinux-config -c u-boot

Changes:

• CONFIG_ENV_IS_NOWHERE=y
• # CONFIG_ENV_IS_IN_SPI_FLASH is not set

Change platform-top.h:

#include <configs/platform-auto.h>


#define UBOOT_ENV_MAGIC 0xCAFEBABE
#define UBOOT_ENV_MAGIC_ADDR 0xFFFFFC00
#define UBOOT_ENV_ADDR 0xFFFFFC04


#define CONFIG_SYS_BOOTM_LEN 0xF000000
#define DFU_ALT_INFO_RAM \
                "dfu_ram_info=" \
        "setenv dfu_alt_info " \
        "image.ub ram $netstart 0x1e00000\0" \
        "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
        "thor_ram=run dfu_ram_info && thordown 0 ram 0\0"

#define DFU_ALT_INFO_MMC \
        "dfu_mmc_info=" \
        "set dfu_alt_info " \
        "${kernel_image} fat 0 1\\\\;" \
        "dfu_mmc=run dfu_mmc_info && dfu 0 mmc 0\0" \
        "thor_mmc=run dfu_mmc_info && thordown 0 mmc 0\0"


/*Required for uartless designs */
#ifndef CONFIG_BAUDRATE
#define CONFIG_BAUDRATE 115200
#ifdef CONFIG_DEBUG_UART
#undef CONFIG_DEBUG_UART
#endif
#endif

/*Dependencies for ENV to be stored in EEPROM. Ensure environment fits in eeprom size*/
#ifdef CONFIG_ENV_IS_IN_EEPROM
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
#define CONFIG_SYS_I2C_EEPROM_ADDR             0x54
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
#define CONFIG_SYS_EEPROM_SIZE                 1024 /* Bytes */
#define CONFIG_SYS_I2C_MUX_ADDR                0x74
#define CONFIG_SYS_I2C_MUX_EEPROM_SEL          0x4
#endif


#define CONFIG_PREBOOT    "echo U-BOOT for petalinux;echo importing env from FSBL shared area at 0xFFFFFC00; if itest *0xFFFFFC00 == 0xCAFEBABE; then echo Found valid magic; env import -t 0xFFFFFC04; fi;setenv preboot; echo; dhcp"

Device Tree

/include/ "system-conf.dtsi"
/ {
};
 
 
/ {
    memory {    // Reduce memory for framebuffers
        device_type = "memory";
        reg = <0x0 0x3FC00000>;  // Reduce memory for 1GB assembly variant
      //  reg = <0x0 0x1FC00000>;  // Reduce memory for 1GB assembly variant
      //  reg = <0x0 0x0FC00000>;  // Reduce memory for 1GB assembly variant
    };
 
 
    framebuffer0: framebuffer@0x3FC00000 {      // HDMI out
        compatible = "simple-framebuffer";
        reg = <0x3FC00000 (1280 * 720 * 4)>;    // 720p
        width = <1280>;                         // 720p
        height = <720>;                         // 720p
        stride = <(1280 * 4)>;                  // 720p
        format = "a8b8g8r8";
    };
 
/*
    framebuffer0: framebuffer@0x1FC00000 {      // HDMI out
        compatible = "simple-framebuffer";
        reg = <0x1FC00000 (1280 * 720 * 4)>;    // 720p
        width = <1280>;                         // 720p
        height = <720>;                         // 720p
        stride = <(1280 * 4)>;                  // 720p
        format = "a8b8g8r8";
    };
*/
/*
    framebuffer0: framebuffer@0x0FC00000 {      // HDMI out
        compatible = "simple-framebuffer";
        reg = <0x0FC00000 (1280 * 720 * 4)>;    // 720p
        width = <1280>;                         // 720p
        height = <720>;                         // 720p
        stride = <(1280 * 4)>;                  // 720p
        format = "a8b8g8r8";
    };
*/
};

&axi_vdma_0 {
   status = "disabled";
};
 
&v_tc_0 {
    //xilinx-vtc: probe of 43c20000.v_tc failed with error -2
    status = "disabled";
};

 
/* default */
 
/* QSPI PHY */
&qspi {
    #address-cells = <1>;
    #size-cells = <0>;
    status = "okay";
    flash0: flash@0 {
        compatible = "jedec,spi-nor";
        reg = <0x0>;
        #address-cells = <1>;
        #size-cells = <1>;
    };
};
 
 
/* ETH PHY */
&gem0 {
    phy-handle = <&phy0>;
    mdio {
        #address-cells = <1>;
        #size-cells = <0>;
        phy0: phy@0 {
            compatible = "marvell,88e1510";
            device_type = "ethernet-phy";
            reg = <0>;
        };
    };
};
 
/* USB PHY */
 
/{
    usb_phy0: usb_phy@0 {
        compatible = "ulpi-phy";
        //compatible = "usb-nop-xceiv";
        #phy-cells = <0>;
        reg = <0xe0002000 0x1000>;
        view-port = <0x0170>;
        drv-vbus;
    };
};
 
&usb0 {
    dr_mode = "host";
    //dr_mode = "peripheral";
    usb-phy = <&usb_phy0>;
};
 
/* I2C need I2C1 connected to te0720 system controller ip */
&i2c1 {
 
    iexp@20 {       // GPIO in CPLD
        #gpio-cells = <2>;
        compatible = "ti,pcf8574";
        reg = <0x20>;
        gpio-controller;
    };
 
    iexp@21 {       // GPIO in CPLD
        #gpio-cells = <2>;
        compatible = "ti,pcf8574";
        reg = <0x21>;
        gpio-controller;
    };
 
    rtc@6F {        // Real Time Clock
        compatible = "isl12022";
        reg = <0x6F>;
    };
};

Kernel

Start with petalinux-config -c kernel

Changes:

• RTC_DRV_ISL12022
• CONFIG_FB_SIMPLE
• CONFIG_LOGO
• CONFIG_LOGO_LINUX_MONO
• CONFIG_LOGO_LINUX_VGA16
• CONFIG_LOGO_LINUX_CLUT224

Rootfs

File system will be generated with Debian script or Ubuntu script (mkdebian_stretch.sh/mkubuntu_BionicBeaver.sh)

Applications

Applications will be generated with Debian script or Ubuntu script (mkdebian_stretch.sh/mkubuntu_BionicBeaver.sh)

Additional Software

No additional software is needed.

Appx. A: Change History and Legal Notices

Document Change History

To get content of older revision  got to "Change History"  of this page and select older document revision number.

Legal Notices