| Number/Link | Description | Note |
|---|---|---|
| AR#72992 | Design Advisory for Zynq UltraScale+ MPSoC/RFSoC: Possible link training failures or data errors on PCIe, SATA, or USB 3.0 protocol links using PS GTR | Important for Designs up to 19.2 and for SATA Gen1 also newer Vivado |
| AR# 68671 | Zynq UltraScale+ MPSoC DisplayPort Controller - What devices are supported with the DisplayPort Controller? | |
| AR# 66652 | Zynq UltraScale+ MPSoC ZCU102 Evaluation Kit - Base TRD Monitor requirements | |
| AR# 68006 | Design Advisory for Xilinx Design Tools (Vivado, SDAccel, SDSoC) 2016.1 and 2016.2 write_bitstream - Multi-threading might cause configuration memory cells to be set incorrectly | |
| AR# 43989 | 7 Series FPGAs - LVDS_33, LVDS_25, LVDS_18, LVDS inputs & outputs for High Range (HR) and High Performance (HP) I/O banks | |
| AR# 68449 | 2016.4 PetaLinux: Migrating U-boot configs from 2016.3 PetaLinux project to 2016.4 PetaLinux Yocto based project | |
| AR# 68446 | 2016.4 PetaLinux: Migrating Kernel configs from 2016.3 PetaLinux project to 2016.4 PetaLinux Yocto based project | |
2016.4 PetaLinux: Migrating Applications from 2016.3 PetaLinux project to 2016.4 PetaLinux Yocto based project | ||
| AR# 69269 | Zynq UltraScale+ MPSoC, SDK - Debugging FSBL application does not show source code | |
| AR# 65467 | Zynq UltraScale+ MPSoC - Boot and Configuration | |
| AR# 66846 | Method to boot from SD or eMMC from QSPI | |
| AR# 37347 | 7 Series FPGAs - Will driving the I/Os of an unpowered bank cause damage to the part? Do 7 Series devices support hot swap? | |
7 Series - What state are the I/Os in at power up? | ||
| AR# 45985 | 7 Series - How do you limit reverse biasing of VCCO when input is being driven by a 3.3V signal before Vcco is powered? | |
| AR# 47317 | Zynq-7000 SoC, ID - Incorrect PS Family IDCODE Value | |
| AR# 47916 | Zynq-7000 SoC Devices - Silicon Revision Differences | |
Zynq-7000 SoC: SD Programming/Booting Checklist | ||
| AR# 70712 | Zynq UltraScale+ MPSoC: PL Masters cannot access high DDR address ranges | changed with 18.3 -automatically activated |
| AR# 66779 | Zynq UltraScale+ MPSoC: List of tested SD cards | |
| AR# 57744 | Design Advisory for Zynq-7000 SoC - Zynq and QSPI reset requirements when using larger than 16MB flash | Trenz Wiki notes: SPI 32 Bit Addressing |
Vivado - What can I do to resolve a Vivado crash, exception, or abnormal program termination? |
Overview
Content Tools