TE0720 HDMI701

Overview

Zynq PS Design with Linux for TE0701 with HDMI support.

Key Features

• PetaLinux
• SD
• ETH
• USB
• I2C
• RTC
• VIO PHY LED
• HDMI
• TE0701

Revision History

Release Notes and Know Issues

Requirements

Software

Hardware

Basic description of TE Board Part Files is available on TE Board Part Files.

Complete List is available on <design name>/board_files/*_board_files.csv

Design supports following modules:

Design supports following carriers:

Additional HW Requirements:

Content

For general structure and of the reference design, see Project Delivery

Design Sources

Additional Sources

Prebuilt

Download

Reference Design is only usable with the specified Vivado/SDK/PetaLinux/SDx version. Do never use different Versions of Xilinx Software for the same Project.

Reference Design is available on:

• TE0720 "Test Board" Reference Design Download Area

Design Flow

Trenz Electronic provides a tcl based built environment based on Xilinx Design Flow.

See also:

• Vivado/SDK/SDSoC
• Vivado Projects
•  Project Delivery.

The Trenz Electronic FPGA Reference Designs are TCL-script based project. Command files for execution will be generated with "_create_win_setup.cmd" on Windows OS and "_create_linux_setup.sh" on Linux OS.

TE Scripts are only needed to generate the vivado project, all other additional steps are optional and can also executed by Xilinx Vivado/SDK GUI.  For currently Scripts limitations on Win and Linux OS see: Project Delivery Currently limitations of functionality

1. _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell:
   
2. Press 0 and enter for minimum setup
3. (optional Win OS) Generate Virtual Drive or use short directory  for the reference design (for example x:\<design name>)
4. Create Project
   
   1. Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd"
      Note: Select correct one, see TE Board Part Files
5. Create HDF and export to prebuilt folder
   
   1. Run on Vivado TCL: TE::hw_build_design -export_prebuilt
      Note: Script generate design and export files into \prebuilt\hardware\<short dir>. Use GUI is the same, except file export to prebuilt folder
6. Create Linux (uboot.elf and image.ub) with exported HDF
   
   1. HDF is exported to "prebuilt\hardware\<short name>"
      Note: HW Export from Vivado GUI create another path as default workspace.
   2. Create Linux images on VM, see PetaLinux KICKstart
      1. Use TE Template from /os/petalinux
         Note: run init_config.sh before you start petalinux config. This will set correct temporary path variable.
7. Add Linux files (uboot.elf and image.ub) to prebuilt folder
   
   1. "prebuilt\os\petalinux\default" or "prebuilt\os\petalinux\<short name>"
      Notes: Scripts select "prebuilt\os\petalinux\<short name>", if exist, otherwise "prebuilt\os\petalinux\default"
8. Generate Programming Files with HSI/SDK
   
   1. Run on Vivado TCL: TE::sw_run_hsi
      Note: Scripts generate applications and bootable files, which are defined in "sw_lib\apps_list.csv"
   2. (alternative) Start SDK with Vivado GUI or start with TE Scripts on Vivado TCL: TE::sw_run_sdk
      Note: See SDK Projects

Launch

Programming

Xilinx documentation for programming and debugging: Vivado/SDK/SDSoC-Xilinx Software Programming and Debugging

QSPI

Not used on this Example.

SD

1. Copy image.ub and Boot.bin on SD-Card.
   • For correct prebuilt file location, see <design_name>/prebuilt/readme_file_location.txt
2. Set Boot Mode to SD-Boot.
   • Depends on Carrier, see carrier TRM.
3. Insert SD-Card in SD-Slot.

JTAG

Not used on this Example.

Usage

1. Prepare HW like described on section Programming
2. Connect UART USB (most cases same as JTAG)
3. Select SD Card as Boot Mode
   Note: See TRM of the Carrier, which is used.
4. Connect HDMI to Monitor
5. Power On PCB
   Note: 1. Zynq Boot ROM loads FSBL from SD into OCM, 2. FSBL loads U-boot from SD into DDR, 3. U-boot load Linux from SD into DDR

Linux

1. Open Serial Console (e.g. putty)
   
   1. Speed: 115200
   2. COM Port: Win OS, see device manager, Linux OS see  dmesg |grep tty  (UART is *USB1)
2. Linux Console:
   Note: Wait until Linux boot finished For Linux Login use:
   
   1. User Name: root
   2. Password: root
3. You can use Linux shell now.
   1. I2C 0 Bus type: i2cdetect -y -r 0
   2. I2C 1 Bus type: i2cdetect -y -r 1
   3. RTC check: dmesg | grep rtc
   4. ETH0 works with udhcpc
   5. USB: insert USB device
      

Vivado HW Manager 

1. Open Vivado HW-Manager and add VIO signal to dashboard (*.ltx located on prebuilt folder).

2. PHY LED:
   

   
   

System Design - Vivado

Block Design

PS Interfaces

Constrains

Basic module constrains

#
# Common BITGEN related settings for TE0720 SoM
#
set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
set_property CONFIG_VOLTAGE 3.3 [current_design]
set_property CFGBVS VCCO [current_design

#
set_property BITSTREAM.CONFIG.UNUSEDPIN PULLUP [current_design]

Design specific constrain

#
# Constraints for System controller support logic
#
set_property PACKAGE_PIN K16 [get_ports PL_pin_K16]
set_property PACKAGE_PIN K19 [get_ports PL_pin_K19]
set_property PACKAGE_PIN K20 [get_ports PL_pin_K20]
set_property PACKAGE_PIN L16 [get_ports PL_pin_L16]
set_property PACKAGE_PIN M15 [get_ports PL_pin_M15]
set_property PACKAGE_PIN N15 [get_ports PL_pin_N15]
set_property PACKAGE_PIN N22 [get_ports PL_pin_N22]
set_property PACKAGE_PIN P16 [get_ports PL_pin_P16]
set_property PACKAGE_PIN P22 [get_ports PL_pin_P22]

#
# If Bank 34 is not 2.5V Powered need change the IOSTANDARD
#
set_property IOSTANDARD LVCMOS25 [get_ports PL_pin*]

#
# TE0701 I2C Bus
#
set_property PACKAGE_PIN W20 [get_ports iic_0_scl_io]
set_property PACKAGE_PIN W21 [get_ports iic_0_sda_io]
set_property IOSTANDARD LVCMOS25 [get_ports iic_0_scl_io]
set_property IOSTANDARD LVCMOS25 [get_ports iic_0_sda_io]

#
# ADV7511 Interface
#
set_property PACKAGE_PIN N20 [get_ports hdmi_out_clk]
set_property PACKAGE_PIN N19 [get_ports hdmi_out_de]
set_property PACKAGE_PIN R19 [get_ports hdmi_out_hsync]
set_property PACKAGE_PIN T19 [get_ports hdmi_out_vsync]
set_property PACKAGE_PIN T18 [get_ports {hdmi_out_data[0]}]
set_property PACKAGE_PIN R18 [get_ports {hdmi_out_data[1]}]
set_property PACKAGE_PIN R21 [get_ports {hdmi_out_data[2]}]
set_property PACKAGE_PIN R20 [get_ports {hdmi_out_data[3]}]
set_property PACKAGE_PIN M22 [get_ports {hdmi_out_data[4]}]
set_property PACKAGE_PIN K21 [get_ports {hdmi_out_data[5]}]
set_property PACKAGE_PIN M21 [get_ports {hdmi_out_data[6]}]
set_property PACKAGE_PIN J20 [get_ports {hdmi_out_data[7]}]
set_property PACKAGE_PIN T17 [get_ports {hdmi_out_data[8]}]
set_property PACKAGE_PIN J22 [get_ports {hdmi_out_data[9]}]
set_property PACKAGE_PIN T16 [get_ports {hdmi_out_data[10]}]
set_property PACKAGE_PIN J21 [get_ports {hdmi_out_data[11]}]
set_property IOSTANDARD LVCMOS25 [get_ports hdmi_*]

set_property PACKAGE_PIN AB16 [get_ports {cec_clk[0]}]
set_property PACKAGE_PIN AB17 [get_ports {ct_hpd[0]}]
set_property PACKAGE_PIN AA16 [get_ports {ls_oe[0]}]
set_property IOSTANDARD LVCMOS25 [get_ports {cec_clk[0]}]
set_property IOSTANDARD LVCMOS25 [get_ports {ct_hpd[0]}]
set_property IOSTANDARD LVCMOS25 [get_ports {ls_oe[0]}]

Software Design - SDK/HSI

For SDK project creation, follow instructions from:

SDK Projects

Application

FSBL

TE modified 2017.2 FSBL

Functions:

• Read EEPROM MAC Address and make Address accessible by UBOOT (need defines on uboot  platform-top.h)
• Read CPLD Firmware and SoC Type
• Configure Marvell PHY
• Configure ADV7511
• Configure Video Timing Controller core
• Configure VDMA core and enable transfers

Changes:

• Add adv7511.c, adv7511.h, vdma.c, vdma.h, te_fsbl_config.h, te_fsbl_hooks.h te_fsbl_hooks.c, and includ into fsbl_hooks.c
  • te_fsbl_hooks.c defines must be changed for Assembly variant with smaller DDR size.

U-Boot

U-Boot.elf is generated with PetaLinux. SDK/HSI is used to generate Boot.bin.

Software Design -  PetaLinux

For PetaLinux installation and  project creation, follow instructions from:

• PetaLinux KICKstart

Config

• Subsystem Auto Hardware Settings:Serial Settings: ps7_uart_0

U-Boot

#include <configs/platform-auto.h>


#define UBOOT_ENV_MAGIC 0xCAFEBABE
#define UBOOT_ENV_MAGIC_ADDR 0xFFFFFC00
#define UBOOT_ENV_ADDR 0xFFFFFC04

Device Tree

Device Tree HDMI entries must be changed for Assembly variant with smaller DDR size.

/include/ "system-conf.dtsi"
/ {
};

/ {
    memory {    // Reduce memory for framebuffers
        device_type = "memory";
        reg = <0x0 0x3FC00000>;  // Reduce memory for 1GB assembly variant
      //  reg = <0x0 0x1FC00000>;  // Reduce memory for 1GB assembly variant
      //  reg = <0x0 0x0FC00000>;  // Reduce memory for 1GB assembly variant
    };


    framebuffer0: framebuffer@0x3FC00000 {      // HDMI out
        compatible = "simple-framebuffer";
        reg = <0x3FC00000 (1280 * 720 * 4)>;    // 720p
        width = <1280>;                         // 720p
        height = <720>;                         // 720p
        stride = <(1280 * 4)>;                  // 720p
        format = "a8b8g8r8";
    };

/* 
    framebuffer0: framebuffer@0x1FC00000 {      // HDMI out
        compatible = "simple-framebuffer";
        reg = <0x1FC00000 (1280 * 720 * 4)>;    // 720p
        width = <1280>;                         // 720p
        height = <720>;                         // 720p
        stride = <(1280 * 4)>;                  // 720p
        format = "a8b8g8r8";
    };
*/
/* 
    framebuffer0: framebuffer@0x0FC00000 {      // HDMI out
        compatible = "simple-framebuffer";
        reg = <0x0FC00000 (1280 * 720 * 4)>;    // 720p
        width = <1280>;                         // 720p
        height = <720>;                         // 720p
        stride = <(1280 * 4)>;                  // 720p
        format = "a8b8g8r8";
    };
*/
};

&axi_vdma_0 {
   status = "disabled";
};

&v_tc_0 {
    //xilinx-vtc: probe of 43c20000.v_tc failed with error -2
    status = "disabled";
};

/* default */

/* Flash */
&qspi {
    flash0: flash@0 {
        compatible = "w25q256";
    };
};

/* ETH PHY */
&gem0 {
    phy-handle = <&phy0>;
    mdio {
        #address-cells = <1>;
        #size-cells = <0>;
        phy0: phy@0 {
            compatible = "marvell,88e1510";
            device_type = "ethernet-phy";
            reg = <0>;
        };
    };
};

/* USB PHY */

/{
    usb_phy0: usb_phy@0 {
        compatible = "ulpi-phy";
        //compatible = "usb-nop-xceiv";
        #phy-cells = <0>;
        reg = <0xe0002000 0x1000>;
        view-port = <0x0170>;
        drv-vbus;
    };
};

&usb0 {
    dr_mode = "host";
    //dr_mode = "peripheral";
    usb-phy = <&usb_phy0>;
};

/* I2C need I2C1 connected to te0720 system controller ip */
&i2c1 {

    iexp@20 {       // GPIO in CPLD
        #gpio-cells = <2>;
        compatible = "ti,pcf8574";
        reg = <0x20>;
        gpio-controller;
    };

    iexp@21 {       // GPIO in CPLD
        #gpio-cells = <2>;
        compatible = "ti,pcf8574";
        reg = <0x21>;
        gpio-controller;
    };

    rtc@6F {        // Real Time Clock
        compatible = "isl12022";
        reg = <0x6F>;
    };
};

Kernel

Activate:

• RTC_DRV_ISL12022
• CONFIG_FB_SIMPLE
• CONFIG_LOGO
• CONFIG_LOGO_LINUX_MONO
• CONFIG_LOGO_LINUX_VGA16
• CONFIG_LOGO_LINUX_CLUT224

Rootfs

Activate:

• i2c-tools

Applications

startup

Script App to load init.sh from SD Card if available.

See: \os\petalinux\project-spec\meta-user\recipes-apps\startup\files

Additional Software

No additional software is needed.

Appx. A: Change History and Legal Notices

Document Change History

To get content of older revision  got to "Change History"  of this page and select older document revision number.

Date	Document Revision	Authors	Description
Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]	Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]	Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]
2017-11-28	v.1	Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]	Initial release
	All	Error rendering macro 'page-info' Ambiguous method overloading for method jdk.proxy244.$Proxy3578#hasContentLevelPermission. Cannot resolve which method to invoke for [null, class java.lang.String, class com.atlassian.confluence.pages.Page] due to overlapping prototypes between: [interface com.atlassian.confluence.user.ConfluenceUser, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject] [interface com.atlassian.user.User, class java.lang.String, class com.atlassian.confluence.core.ContentEntityObject]

Legal Notices