Overview
The Trenz Electronic TE0729 is an industrial-grade SoM (System on Module) based on Xilinx Zynq-7000 SoC (7015 or 7030).
This SoM has following peripherals on board:
- 1 x Gbps Ethernet Phy transceiver
- 2 x 100 Mbps Ethernet PHY transceivers
- 512 MByte DDR3 SDRAM
- 32 MByte Flash-Memory
- 4 Gbyte NAND-Flash-Memory
- USB PHY transceiver
- powerful switch-mode power supplies for all on-board voltages
- large number of configurable I/Os is provided via rugged high-speed stacking strips
All modules in 4 x 5 cm form factor are mechanically compatible.
Block diagram
Board Components
Main Components:
Key Features
- Industrial-grade Xilinx Zynq-7000 (Z-7015, Z-7030) SoM
- Rugged for shock and high vibration
- 2 x ARM Cortex-A9
- 1 x 10/100/1000 Gbps Ethernet transceiver PHY
- 2 x 10/100 Mbps Ethernet transceiver PHYs
- 3 x MAC-Address EEPROMs
- 16-Bit wide 512 MByte DDR3 SDRAM
- 32 MByte QSPI-Flash-Memory
- 4 GByte NAND-Flash-Memory (embedded eMMC Memory)
- Programmable Clock Generator
- Transceiver Clock (default 125 MHz)
- USB 2.0 high-speed ULPI transceiver
- On-board high-efficiency DC-DC converters
- 4.0 A x 1.0 V power rail
- 1.5 A x 1.5 V power rail
- 1.5 A x 1.8 V power rail
- 1.5 A x 2.5 V power rail
- System management
- eFUSE bit-stream encryption
- AES bit-stream encryption
- Temperature compensated RTC (real-time clock)
- User LED
- Evenly-spread supply pins for good signal integrity
Assembly options for cost or performance optimization available upon request.
Overview
Content Tools