You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Overview

Board Overview

Power supply

Over Micro USB or VIN Pin (5V) possible.

JTAG/UART

JTAG and UART connections are available through Micro USB connector.  External JTAG Programmer is not needed.

Push Buttons

  • Reset Button: reset Cyclone V (connected to nCONFIG Pin)
  • User Button: connected to FPGA Pin L17

LEDs

There are 2 status LEDs and 8 user LEDs which can be used for variant purposes.


NameColorConnected toActive LevelNote
Power LEDGreen3.3Vlow3.3V status LED
CONF_DONERedCONF_DONE pinhigh--
LED1RedP4high--
LED2RedM4high--
LED3RedM3high--
LED4RedN3high--
LED5RedV2high--
LED6RedL2high--
LED7RedL1high--
LED8RedK1high--
Module LEDs

CRUVI Pin Header J3

The Pin Header J3 is based on CRUVI Standard. For more information, please visit www.cruvi.com.

Reference Designs

Notes




Table of contents


  • No labels