PCN-20190103 TE0630-01 to TE0630-02 Hardware Revision Change

Products Affected

This change affects all variations of TE0630 carrier of revision: TE0630-01

1) Replaced U8 by EN6338QI

2) Rerouted nets around U8, results in new track length for:

    Signal V3_IO_06 15.2475 mm (was 15.0047mm)

    Signal V3_IO_07 16.0151 mm (was 15.0452 mm)

3) Replaced U5 by EN 6338QI

4) PS_EN now via OR gate

5) Replaced obsolete Diodes D1, D2 D4, by BAT54A

6) Fixed Footprint of  U10 according to datasheet

7) Update from LIB

8) Rearranged Testpoints

9) Added Traceability Pad

10) Replaced S5 by smaller PB AN26337

Changes

#1 

Type:

Reason:

Impact:

Method of Identification

The model code and revision number (e.g. TE0630-01 or TE0630-02) are printed on the top side of the PCB.

Production Shipment Schedule

Januar 2019.

Contact Information

If you have any questions related to this PCN, please contact Trenz Electronic's Technical Support at

• forum.trenz-electronic.de
• wiki.trenz-electronic.de
• support%trenz-electronic.de (subject = PCN-20190103)

• phone

  • national calls: 05223 65301-0

  • international calls: 0049 5223 65301-0

Disclaimer

Any projected dates in this PCN are based on the most current product information at the time this PCN is being
issued, but they may change due to unforeseen circumstances.  For the latest schedule and any other information,
please contact your local Trenz Electronic sales office, technical support or local distributor.